CP High Volume www.vishay.com Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead FEATURES * High performance for low cost * High power to size ratio * Ceramic cases are available with circuit board stand-offs (designated with a ...3 model ending) * Special cement potting compound and ceramic case provide high thermal conductivity in a fireproof package * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P40 C W RESISTANCE RANGE WIREWOUND RESISTANCE RANGE METAL OXIDE TOLERANCE % WEIGHT (typical) g CP0002 2 0.1 to 100 101 to 30K 5, 10 2.0 CP0003 3 0.1 to 100 101 to 33K 5, 10 3.4 CP0005 5 0.1 to 100 101 to 50K 5, 10 3.6 CP0005...3 5 0.1 to 100 101 to 50K 5, 10 4.8 CP0007 7 0.1 to 100 101 to 50K 5, 10 5.0 GLOBAL MODEL CP0007...3 7 0.1 to 100 101 to 50K 5, 10 6.8 CP0010 10 0.1 to 100 101 to 50K 5, 10 9.5 CP0010...3 10 0.1 to 100 101 to 50K 5, 10 9.9 CP0015 15 0.1 to 100 101 to 50K 5, 10 16.8 CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8 TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature Coefficient Short Time Overload WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICS ppm/C 400 400 - 5 x rated power for 5 s 5 x rated power for 5 s Terminal Strength lb 10 minimum 10 minimum Operating Temperature Range C - 65 to + 275 - 65 to + 225 Dielectric Withstanding Voltage VAC 1000 1000 V (P x R)1/2 (P x R)1/2 Maximum Working Voltage GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CP000515R00JE663 C P 0 GLOBAL MODEL (See Standard Electrical Specifications Global Model column for options) Revision: 14-Aug-12 0 0 5 VALUE R = Decimal K = Thousand R1500 = 0.15 1K500 = 1500 1 5 R TOLERANCE J = 5.0 % K = 10.0 % 0 0 J E 6 PACKAGING E66 = Lead (Pb)-free bulk pack 6 3 SPECIAL (Dash Number) (up to 3 digits) From 1 to 999 as applicable Document Number: 30113 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CP High Volume www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] CPxxxx CPxxxx...3 LL LD L W LL L H H H1 LD 0.125 [3.18] typical W DIMENSIONS in inches [millimeters] GLOBAL MODEL L (1) 0.060 [1.5] W 0.040 [1.0] H 0.040 [1.0] H1 0.060 [1.5] LD 0.002 [0.05] CP0002 0.71 [18] 0.276 [7] 0.276 [7] - 0.0256 [0.65] 1.378 [35] CP0003 0.87 [22] 0.315 [8] 0.315 [8] - 0.031 [0.8] 1.378 [35] CP0005 0.87 [22] 0.394 [10] 0.354 [9] - 0.031 [0.8] 1.378 [35] CP0005...3 0.87 [22] 0.394 [10] 0.354 [9] 0.413 [10.5] 0.031 [0.8] 1.378 [35] CP0007 1.38 [35] 0.394 [10] 0.354 [9] - 0.031 [0.8] 1.378 [35] CP0007...3 1.38 [35] 0.394 [10] 0.354 [9] 0.472 [12] 0.031 [0.8] 1.378 [35] CP0010 1.89 [48] 0.394 [10] 0.354 [9] - 0.031 [0.8] 1.378 [35] CP0010...3 1.89 [48] 0.394 [10] 0.354 [9] 0.472 [12] 0.031 [0.8] 1.378 [35] CP0015 1.89 [48] 0.492 [12.5] 0.453 [11.5] - 0.031 [0.8] 1.378 [35] CP0020 2.36 [60] 0.551 [14] 0.531 [13.5] - 0.031 [0.8] 1.378 [35] LL 0.120 [3.0] Notes (1) Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side. DERATING Element: Wirewound = Copper-nickel alloy or nickelchrome alloy, depending on resistance value Metal Oxide = High temperature fired metal oxide film Core: Wirewound = Woven fiberglass Metal Oxide = Ceramic Body: Steatite ceramic case with inorganic potting compound RATED POWER IN % MATERIAL SPECIFICATIONS 120 100 80 60 Wirewound 40 End Caps: Tin plated steel Terminals: Tinned copper 20 Part Marking: DALE, model, wattage, value, tolerance, date code 0 - 55 Metal Oxide - 25 25 75 40 125 175 275 225 AMBIENT TEMPERATURE IN C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS (EIA-344) Thermal Shock - 55 C to + 275 C (+ 225 C for Metal Oxide), 5 cycles, 30 min dwell time (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s (4.0 % + 0.05 ) R (2.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS, for 1 min Low Temperature Storage - 65 C, full rated working voltage for 45 min (3.0 % + 0.05 ) R Humidity 75 C, 90 % to 100 % RH, 240 h (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 25 C, 1.5 h "ON", 0.5 h "OFF" (10.0 % + 0.05 ) R Terminal Strength 5 pounds for 30 s; body twisted about axis, 3 x 360 rotations (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body (4.0 % + 0.05 ) R Revision: 14-Aug-12 Document Number: 30113 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000