LITE-ON SEMICONDUCTOR Sidac High Voltage Sillicon Bidirectional Thyristors SD1A-F SERIES SIDACS 1 AMPERES RMS 120 thru 240 VOLTS FEATURES High pulse current capability, typ=120A/us Glass passivation insures reliable operation Max. Dynamic Holding Current -100mA DO-201AD A A B UL Recognition File # E219635 C APPLICAITON D High Pressure Sodium Vapor Lighting Strobes and Flashers Ignitors High Voltage Regulators Pulse Generators Used to Trigger Gates of SCR's and Triacs DO-201AD Dim. A Min. B 25.4 7.30 C 1.20 Max. 9.50 1.30 4.80 5.30 D All Dimensions in millimeter MECHANICAL DATA Case: JEDEC DO-201AD molded plastic Terminals: Lead Free Plating (Matte Tin Finish) Component in accordance to RoHs 2002/95/EC Weight : 0.04 ounces, 1.1 grams MAXIMUM RATINGS (Tj= 25 unless otherwise noticed) Rating Symbol Value Unit VDRM, VRRM 90 180 Volts IT(RMS) 1 Amp ITSM 20 Amps TJ -40 to +125 Tstg -40 to +150 Peak Repetitive Off- State Voltage (TJ= -40 to 125, Sine Wave, 50 to 60 Hz) SD1A120F SD1A220F, SD1A240F On-State RMS Current (TL = 80, Lead Lengh=3/8" , All Conduction Angles) Peak Non-Repetitive Surge Current 60 Hz One Cycle Sine Wave (Tj = 125) Operating Junction Temperature Range Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 2 REV. 7, Oct-2010, KDXF01 RATING AND CHARACTERISTIC CURVES SD1A-F SERIES THERMAL CHARACTERISTICS Characteristic Thermal Resistance - Junction to Lead Lead Length = 3/8 " Maximum Lead Solder Temperature (Lead Length 1/16 " from Case, 10s Max) Symbol Value Unit RthJL 15 /W TL 260 ELECTRICAL CHARACTERISTICS (Tj=25 unless otherwise noted) Characteristics Symbol Min Typ Max Unit IDRM ---- ---- 10 uA VTM ---- 1.1 1.5 Volts VBO 110 210 220 ------- 130 230 250 Volts Breakover Current IBO ---- ---- 200 uA Dynamic Holding Current (Sine Wave, 50 to 60 Hz, RL=100 Ohm) IH ---- ---- 100 mA Switching Resistance (Sine Wave, 50 to 60 Hz) Rs 0.1 ---- ---- k OFF CHARACTERISTICS Peak Reptitive Forward or Reverse Blocking Current (50 to 60 Hz Sine Wave) VDRM=90V SD1A120F VDRM=180V SD1A220F, SD1A240F ON CHARACTERISTICS Peak On-State Voltage (ITM=1A Peak @Tp 300 us, Duty Cycle 2%) Breakover Voltage, IBO = 35 uA SD1A120F SD1A220F SD1A240F DYNAMIC CHARACTERISTICS Critical Rate of Rise of On-State Current, Critical Damped Waveform Circuit (IPK = 130 A, Pulse Width = 10 us) di/dt ORDERING INFORMATION ---- MARKING INFORMATION SD 1A 120 F SIDAC Series Current: 1A=1A Voltage: 120=120V 220=220V 240=240V Package: DO-201AD SD1AXXXF NOTE: XXX = Voltage 120 ---- A/us RATING AND CHARACTERISTIC CURVES SD1A-F SERIES Legal Disclaimer Notice SD1A-F SERIES Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.