SD1A-F SERIES
MAXIMUM RATINGS
(Tj= 25 unless otherwise noticed)
℃
FEATURES
High pulse current capability, typ=120A/us
Glass passivation insures reliable operation
Max. Dynamic Holding Current -100mA
UL Recognition File # E219635
APPLICAITON
High Pressure Sodium Vapor Lighting
Strobes and Flashers
Ignitors
High Voltage Regulators
Pulse Generators
Used to Trigger Gates of SCR's and Triacs
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic
Terminals: Lead Free Plating (Matte Tin Finish)
Component in accordance to RoHs 2002/95/EC
Weight : 0.04 ounces, 1.1 grams
Sidac High Voltage
Sillicon Bidirectional Thyristors
SIDACS
1 AMPERES RMS
120 thru 240 VOLTS
SEMICONDUCTOR
LITE-ON
Rating Symbol Value Unit
Peak Repetitive Off– State Voltage
(
T
J
= -40 to 125
℃
, Sine Wave, 50 to 60 Hz)
V
DRM
,
V
RRM
± 90
± 180 Volts
On-State RMS Current
(
T
L
= 80
,
℃
Lead Lengh=3/8” , All Conduction Angles) I
T(RMS)
± 1 Amp
Peak Non-Repetitive Surge Current
60 Hz One Cycle Sine Wave (Tj = 125
℃
)I
TSM
± 20 Amps
Operating Junction Temperature Range
T
J
-40 to +125
℃
Storage Temperature Range Tstg -40 to +150
℃
2
REV. 7, Oct-2010, KDXF01
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not normal operating
conditions) and are not valid simultaneously. If these limits are exceeded, device functional
operation is not implied, damage may occur and reliability may be affected.
SD1A120F
SD1A220F, SD1A240F
DO-201AD
All Dimensions in millimeter
Max.
Min.
DO-201AD
Dim.
A
D
C
B
25.4
9.50
-
7.30
1.20
4.80 5.30
1.30
A
C
D
A
B
RATING AND CHARACTERISTIC CURVES
SD1A-F SERIES
Characteristic Symbol Value Unit
Thermal Resistance - Junction to Lead
Lead Length = 3/8 ” R
thJL
15
/
℃
W
Maximum Lead Solder Temperature
(Lead Length 1/16 ” from Case, 10s Max)
≧
T
L
260
℃
Characteristics Symbol Min Typ Max Unit
Peak Reptitive Forward or Reverse Blocking Current
(50 to 60 Hz Sine Wave)
V
DRM
=90V
V
DRM
=180V
I
DRM
---- ----
10 uA
Peak On-State Voltage
(I
TM=
1A Peak @Tp 300 us, Duty Cycle 2%)
≦ ≦
V
TM
---- 1.1 1.5 Volts
Breakover Voltage, IBO = 35 uA
V
BO
110
210
220
---
---
---
130
230
250
Volts
Breakover Current I
BO
---- ---- 200 uA
Dynamic Holding Current
(Sine Wave, 50 to 60 Hz, R
L
=100 Ohm) I
H
---- ---- 100 mA
Switching Resistance
(Sine Wave, 50 to 60 Hz) Rs 0.1 ---- ---- kΩ
Critical Rate of Rise of On-State Current,
Critical Damped Waveform Circuit
(I
PK
= 130 A, Pulse Width = 10 us)
di/dt ---- 120 ---- A/us
THERMAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(T
j
=25 unless otherwise noted)
℃
OFF CHARACTERISTICS
ON CHARACTERISTICS
DYNAMIC CHARACTERISTICS
SD1A120F
SD1A220F
SD1A240F
SD1A120F
SD1A220F, SD1A240F
ORDERING INFORMATION MARKING INFORMATION
SD1AXXXF
NOTE: XXX = Voltage
SD 1A 120 F
SIDAC Series Current: Voltage: Package:
1A=1A 120=120V DO-201AD
220=220V
240=240V
RATING AND CHARACTERISTIC CURVES
SD1A-F SERIES
Legal Disclaimer Notice
SD1A-F SERIES
LSC reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm
the latest product information and specifications before final design, purchase or
use.
LSC makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does LSC assume any liability for
application assistance or customer product design. LSC does not warrant or
accept any liability with products which are purchased or used for any
unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property
rights of LSC.
LSC products are not authorized for use as critical components in life support
devices or systems without express written approval of LSC.
Important Notice and Disclaimer
