NJW1176 AUDIO PROCESSOR with Subwoofer Output GENERAL DESCRIPTION The NJW1176 is a sound processor with subwoofer output includes all of functions processing audio signal for TV, such as tone control, balance, volume, mute, and AGC functions. Also the NJW1176 includes the LPF for subwoofer output and bass boost function. The original surround system reproduces natural surround sound and clear vocal orientation. 2 All of internal status and variables are controlled by I C BUS interface. PACKAGE OUTLINE FEATURES Operating Voltage 7.5 to 13V 3ch Output (Lch, Rch, Subwoofer ch) / 2ch Output(Lch, Rch) LPF Filter (Adjustable cut off frequency by external parts) AGC Circuit (It reduces volume difference among input sources.) 2 Adjustable AGC compression level by I C BUS eala(NJRC Original Surround System) Simulated Stereo 2 I C BUS Interface Bi-CMOS Technology Package Outline SDIP30, SDMP30, SSOP32 BLOCK DIAGRAM SUR TONETONE TONE SUR - FIL OUTa INa -Ha -La LF1 LF2 LF3 AGC IN a VOL1 IN b TONE VOL1 NJW1176V OUTa SCL SDA VOL2 I2CBUS Interface eala & Simulated Stereo AGC NJW1176M NJW1176L LPF TONE VOL2 CVA CVB CVW CTH CTL Trimmer AUX1 AUX0 VOL2 GND Bias V+ SUR TONE TONE TONE -INb -Hb -Lb OUTb - OUTb OUTw Vref -1- NJW1176 PIN CONFIGURATION (SDIP30, SDMP30) No. Symbol 1 INa 2 CVW 3 LF1 4 1 INa INb 30 2 CVW LF2 29 3 LF1 LF3 28 4 SUR OUTa SUR OUTb 27 5 TONE INa TONE INb 26 6 TONE-Ha TONE-Hb 25 7 TONE-La TONE-Lb 24 8 OUTa OUTb 23 9 AGC OUTw 22 10 SUR-FIL VREF 21 11 CVB CTH 20 12 CVA CTL 19 13 SDA AUX0 18 14 SCL AUX1 17 15 GND Vcc 16 Function No Symbol Function Ach Input 16 Vcc Power Supply Pin Wch DAC output terminal for LPF trimmer 17 AUX1 Auxiliary Output1 LPF filter1 terminal 18 AUX0 Auxiliary Output0 SUR OUTa Ach Output for the Other Accessories 19 CTL 5 TONE INa Ach Input From the Other Accessories 20 CTH 6 TONE-Ha Ach Treble Filter 21 VREF 7 TONE-La Ach Bass Filter 22 OUTw Wch Output 8 OUTa Ach Output 23 OUTb Bch Output 9 AGC AGC Filter 24 TONE-Lb Bch Bass Filter 10 SUR-FIL eala and Simulated Stereo Filter 25 TONE-Hb Bch Treble Filter 11 CVB DAC Output for Bch Volume & Balance 26 TONE INb Bch Input from the Other Accessories 12 CVA DAC Output for Ach Volume & Balance 27 SUR OUTb Bch Output for the Other Accessories 13 SDA SDA Data Input (I2C BUS) 28 LF3 14 SCL SCL Data Input (I2C BUS) 29 LF2 LPF filter2terminal 15 GND GND 30 INb Bch Input () -2- DAC Output for Tone Low Frequency DAC Output for Tone High Frequency Reference Voltage LPF filter3 terminal The AUX0 terminal should be connected via the protection resistance to 5V device. NJW1176 PIN CONFIGURATION (SSOP32) No. Symbol 1 INa 2 CVW 3 LF1 4 1 INa INb 32 2 CVW LF2 31 3 LF1 LF3 30 4 SUR OUTa SUR OUTb 29 5 TONE INa TONE INb 28 6 TONE-Ha TONE-Hb 27 7 TONE-La TONE-Lb 26 8 OUTa OUTb 25 9 AGC OUTw 24 10 SUR-FIL VREF 23 11 CVB CTH 22 12 CVA CTL 21 13 SDA AUX0 20 14 SCL AUX1 19 15 GND Vcc 18 16 N.C. N.C. 17 Function No Symbol Ach Input 17 N.C. Function No Connection Wch DAC output terminal for LPF trimmer 18 Vcc Power Supply Pin LPF filter1 terminal 19 AUX1 Auxiliary Output1 SUR OUTa Ach Output for the Other Accessories 20 AUX0 Auxiliary Output0 5 TONE INa Ach Input From the Other Accessories 21 CTL DAC Output for Tone Low Frequency 6 TONE-Ha Ach Treble Filter 22 CTH DAC Output for Tone High Frequency 7 TONE-La Ach Bass Filter 23 VREF Reference Voltage 8 OUTa Ach Output 24 OUTw Wch Output 9 AGC AGC Filter 25 OUTb 10 SUR-FIL eala and Simulated Stereo Filter 26 TONE-Lb Bch Bass Filter 11 CVB DAC Output for Bch Volume & Balance 27 TONE-Hb Bch Treble Filter 12 CVA DAC Output for Ach Volume & Balance 28 TONE INb Bch Input from the Other Accessories 2 Bch Output 13 SDA SDA Data Input (I C BUS) 29 SUR OUTb 14 SCL SCL Data Input (I2C BUS) 30 LF3 LPF filter3 terminal 15 GND GND 31 LF2 LPF filter2terminal 16 N.C. No Connection 32 INb Bch Input () Bch Output for the Other Accessories The AUX0 terminal should be connected via the protection resistance to 5V device. - 3 - NJW1176 ABSOLUTE MAXIMUM RATING (Ta=25C) PARAMETER SYMBOL RATING UNIT 15 V (L, M type) 700 (V type) 800 mW + Supply Voltage V Power Dissipation PD NOTE: EIA/JEDEC STANDARD Test board (76.2x114.3x1.6mm, 2layer, FR-4) mounting Operating Temperature Range Topr -20 to +75 C Storage Temperature Range Tstg -40 to +125 C ELECTRICAL CHARACTERISTICS ( Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified) Condition PARAMETER SYMBOL Input Output INa INb + Operating Voltage Supply Current V ICC No Signal Reference Voltage VREF No Signal Maximum Input Voltage VIM VOL=-20dB,THD=1% Maximum Output Voltage VOM VOL=0dB, THD=1% Channel Balance Balance Boost A GCB BABST Balance Cut A BACUT Balance Boost B BBBST Balance Cut B BBCUT Trimmer Boost TRBST Trimmer Cut TRCUT Total Harmonic Distortion THD VOL=0dB CHS="0",BAL="111111" CHS="1", BAL="111111" Vin = 1Vrms CHS="1",BAL="111111" CHS="0", BAL="111111" Vin = 1Vrms VOL=0dB TRIM = +18dB VOL=0dB TRIM = Mute Vo=0.5Vrms, BW=400Hz to 30kHz Maximum Gain GVMAX VOL=0dB Minimum Gain GVMIN VOL=MUTE Vin=1Vrms Channel Separation CS Output Noise 1 VNO1 Output Noise 2 VNO2 Output Noise 3 VNO3 Vin=1Vrms A-weighted VOL=0dB A-weighted VOL=MUTE A-weighted VOL=MUTE,TRIM=MUTE A-weighted MIN. TYP. MAX. UNIT - - - 7.5 - 9.0 13 13.0 25 V mA Vin Vin Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa 4.0 4.5 5.0 V 2.8 3.0 - Vrms - 2.5 - Vrms -1.5 -2.0 0.0 0.0 1.5 2.0 dB dB Vin Vin OUTa - - -70 dB Vin Vin OUTb -2.0 0.0 2.0 dB Vin Vin OUTb - - -70 dB Vin Vin OUTw 16.0 18.0 20.0 dB Vin Vin OUTw - - -70 dB Vin Vin Vin Vin - Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb OUTb OUTa - - 0.5 % -2.0 0.0 2.0 dB - - -70 dB - - -70 dB - - - - - - - - - - - - -90 (31.6) -106 (5.0) -100 (10.0) -85 (56.2) -96 (15.8) -90 (30.0) dBV (Vrms) dBV (Vrms) dBV (Vrms) BW : Band Width -4- NJW1176 ELECTRICAL CHARACTERISTICS (Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified) Condition PARAMETER SYMBOL Input Output INa INb MIN. TYP. MAX. UNIT 12.5 15.0 17.5 dB -2.0 0.0 2.0 dB -17.5 -15.0 -12.5 dB 12.5 15.0 17.5 dB -2.0 0.0 2.0 dB -17.5 -15.0 -12.5 dB 1.5 3.5 5.5 dB -2.5 0.0 2.5 dB -2.5 0.0 2.5 dB -2.5 0.0 2.5 dB -2.5 0.0 2.5 dB -14 -10 -6.0 dB 6.3 8.3 10.3 dB 2.1 4.1 6.1 dB 10.7 12.7 14.7 dB 8.4 10.4 12.4 dB 1.0 1.0 3.0 3.0 5.0 5.0 dB dB 4.5 2.0 0 3.5 - 5.5 3.0 0.5 V+ 0 - 0.5 TONE High Frequency Boost HFBST BCT="1" TREB=+15dB, f=10kHz High Frequency Flat HFFLT TREB=0, f=10kHz High Frequency Cut HFCUT BCT="0" TREB=-15dB, f=10kHz Low Frequency Boost LFBST BCB="1" BASS=+15dB, f=100Hz Low Frequency Flat LFFLT BASS=0, f=100Hz Low Frequency Cut LFCUT BCB="0" BASS=-15dB, f=100Hz Vin Vin Vin Vin Vin Vin - Vin Vin Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin OUTa OUTb OUTb OUTa OUTa OUTb OUTb OUTa OUTa OUTb - - - - - - AGC AGC Boost AGCBST AGC Flat1 AGCFLT1 AGC Flat2 AGCFLT2 AGC Flat3 AGCFLT3 AGC Flat4 AGCFLT4 AGC Cut AGCCUT Vin=50mVrms, f=1kHz AGC="1" Vin=100mVrms,f=1kHz AGC="1", AGCL="00" Vin=200mVrms, f=1kHz AGC="1", AGCL="01" Vin=300mVrms, f=1kHz AGC="1", AGCL="10" Vin=400mVrms, f=1kHz AGC="1", AGCL="11" Vin=2Vrms, f=1kHz AGC="1" SURROUND Surround Gain1 SRGAIN1 Surround Gain2 SRGAIN2 Surround Gain3 SRGAIN3 Surround Gain4 SRGAIN 4 Simulated Stereo1 Simulated Stereo2 SRSIM1 SRSIM2 f=100Hz Surround Effect1 f=100Hz Surround Effect1 f=100 Hz Surround Effect2 f=100Hz Surround Effect2 f=1kHz, Simulated Stereo f=1kHz, Simulated Stereo AUX AUX0 Output Voltage VAUX0 AUX1 Output Voltage VAUX1 Logic Output : High Logic Output : Mid Logic Output : Low Logic Output : High Logic Output : Low V V - 5 - NJW1176 2 I C BUS BLOCK CHARACTERISTICS (SDA,SCL) 2 I C BUS Load Conditions: Pull up resistance 4k (Connected to +5V), Load capacitance 200pF (Connected to GND) PARAMETER SYMBOL Standard mode Fast mode MIN. TYP. MAX. MIN. TYP. MAX. UNIT Low Level Input Voltage VIL 0.0 - 1.5 0.0 - 1.5 V High Level Input Voltage VIH 2.7 - 5.0 2.7 - 5.0 V Hysteresis of Schmitt trigger inputs Vhys - - - 0.25 - - V Low level output voltage (3mA at SDA pin) VOL 0 - 0.4 0 - 0.4 V Output fall time from VIHmin to VILmax with a bus capacitance from 10pF to 400pF Pulse width of spikes which must be suppressed by the input filter Input current each I/O pin with an input voltage between 0.1VDD and 0.9VDDmax tof - - 250 20 +0.1Cb - 250 ns tSP - - - 0 - 50 ns Ii -10 - 10 -10 - 10 A Capacitance for each I/O pin Ci - - 10 - - 10 pF fSCL - - 100 - - 400 kHz tHD:STA 4.0 - - 0.6 - - s Low period of the SCL clock tLOW 4.7 - - 1.3 - - s High period of the SCL clock tHIGH 4.0 - - 0.6 - - s Set-up time for a repeated START condition tSU:STA 4.7 - - 0.6 - - s Data hold time tHD:DAT 0 - 3.45 0 - 0.9 s Data set-up time tSU:DAT 250 - - 100 - - ns Rise time of both SDA and SCL signals tr - - 1000 - - 300 ns Fall time of both SDA and SCL signals tf - - 300 - - 300 ns tSU:STO 4.0 - - 0.6 - - s Bus free time between a STOP and START condition tBUF 4.7 - - 1.3 - - s Capacitive load for each bus line Cb - - 400 - - 400 pF Noise margin at the Low level VnL 0.5 - - 0.5 - - V Noise margin at the High level VnH 1 - - 1 - - V SCL clock frequency Hold time (repeated) START condition. Set-up time for STOP condition Cb ; total capacitance of one bus line in pF. 2 I C BUS Load Condition: Pull up resistance 4k (Connected to +5V) Load capacitance 200pF (Connected to GND) SDA tBUF tR tHD:STA tF SCL tHD:STA tLOW P -6- S tHD:DAT tHIGH tSU:STA tSU:DAT Sr tSU:STO P NJW1176 TERMINAL DESCRIPTION No. SDIP SDMP SSOP SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE V+ 1,30 pin 1 30 1 32 INa INb 20k Ach input terminal Bch input terminal V+/2 80k Vref 22 8 23 24 8 25 OUTw OUTa OUTb Subwoofer output terminal Ach output terminal Bch output terminal 100 8, 22, 23pin V+/2 FB 10pin 10 10 SUR-FIL FB Surround filter terminal V+/2 2k (eala) 6k (sim) 6 25 6 27 TONE-Ha TONE-Hb Treble(tone control) filter terminal 7 24 7 26 TONE-La TONE-Lb Bass(tone control) filter terminal FB 18k 12k FB 12k 6, 25pin V+/2 7, 24pin V+/2 - 7 - NJW1176 TERMINAL DESCRIPTION No. SDIP SDMP SSOP 9 9 SYMBOL FUNCTION AGC Capacitor connection terminal for AGC attack and recovery time setting EQUIVALENT CIRCUIT VOLTAGE 9pin 12k 400 400 AGC; OFF=0.65V ON=1.4V 1k 18pin 18 20 AUX0 Auxiliary 3 values voltage output terminal 17 19 AUX1 Auxiliary 2 values voltage output terminal (Open collector type output) FB 17pin Low=0V Mid=2.5V High= 5.0V Low=0V High=3.5V to V+ 12k D1 D2 13 13 SDA D13 2 I C data terminal 13pin D14 4k - 8k D1 D2 14 14 SCL D13 2 I C clock terminal 14pin D14 4k 8k -8- - NJW1176 TERMINAL DESCRIPTION No. SDIP SDMP SSOP 15 16 15 17 SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE GND V+ Ground terminal Supply voltage terminal - 0V V+ 21pin 21 23 Vref 200k Reference voltage terminal V+/2 200k 19 20 21 22 CTL CTH DAC output for tone control terminal 2 11 12 2 11 12 CVW CVB CVA DAC output terminal for trimmer control DAC output terminal for Bch volume control DAC output terminal for Ach volume control 19, 20pin 36k - 8k 2, 11, 12pin - 4k 28, 29pin 29 28 31 30 LF3 LF2 LPF filter terminal V+/2+0.7V - 9 - NJW1176 TERMINAL DESCRIPTION No. SDIP SDMP SSOP 3 3 SYMBOL FUNCTION LF1 LPF filter terminal EQUIVALENT CIRCUIT VOLTAGE 3pin V+/2 1.8k - 10 - NJW1176 MEASUREMENT CIRCUIT 0.47 Input Ach 0.47 1 INa INb 30 2 CVW LF2 29 3 LF1 LF3 28 4 SUR OUTa 4.7 Vin 0.047 0.47 4.7 5 TONE INa SUR OUTb 27 TONE INb 26 2.2n 2.2n 6 TONE -Ha TONE-Hb 25 7 TONE -La TONE-Lb 24 100n 100n 4.7 Output Bch 4.7 8 OUTa OUTb 23 9 AGC1 OUTw 22 4.7 330nF 47k Vin 0.022 4.7 Output Ach Input Bch Output Wch 47k 4.7 100n 10 SUR-FIL VREF 21 11 CVB CTH 20 12 CVA CTL 19 47k Vref 4.7 4.7 4.7 4.7 AUX0 13 SDA AUX0 18 14 SCL AUX1 17 AUX1 SDA VPTIN0 VADRIN 15 (3) GND V+ (1) 16 VPTIN1 (2) Icc SCL 22 V+ V+ (1) VAUX0 Output High Output Low IAUX0 +1mA -120A VAUX1 Output Low IAUX1 -1mA VOL Output Low IOL -3mA (2) (3) - 11 - NJW1176 APPLICATION CIRCUIT 1 Input Ach (SDIP30, SDMP30) 0.47 0.47 1 INa INb 30 2 CVW LF2 29 3 LF1 LF3 28 4 SUR OUTa 4.7 0.047 0.47 0.022 4.7 4.7 5 TONE INa SUR OUTb 27 TONE INb 26 2.2n 2.2n 6 TONE -Ha TONE-Hb 25 7 TONE -La TONE-Lb 24 100n 100n Output Ach 4.7 8 OUTa OUTb 23 9 AGC1 OUTw 22 330nF 10 SUR-FIL VREF 21 11 CVB CTH 20 12 CVA CTL 19 4.7 SCL 220 4.7 Output Wch 4.7 AUX0 13 SDA AUX0 18 14 SCL AUX1 17 15 GND V+ 16 VAUX1 3.5V to V+ AUX1 10k V+ 22 2 Output Bch 4.7 4.7 100 4.7 4.7 100n SDA Input Bch V+ (4) Separate the I C bus line and Signal line from the following terminals for avoiding digital noise problem and cross talk. Pin No. Symbol Pin No. Symbol 3 LF1 24 TONE-Lb 6 TONE-Ha 25 TONE-Hb 7 TONE-La 28 LF3 10 SUR-FIL 29 LF2 - 12 - NJW1176 APPLICATION CIRCUIT 2 Input Ach (SDIP30, SDMP30) 0.47 0.47 1 INa INb 30 2 CVW LF2 29 3 LF1 LF3 28 4 SUR OUTa 4.7 0.047 0.47 0.022 4.7 4.7 SUR OUTb 27 TONE INb 26 4.7 4.7 5 TONE INa 2.2n 2.2n 6 TONE -Ha TONE-Hb 25 7 TONE -La TONE-Lb 24 100n 100n Output Ach 4.7 8 OUTa OUTb 23 9 AGC1 OUTw 22 330nF 10 SUR-FIL VREF 21 11 CVB CTH 20 12 CVA CTL 19 4.7 SCL 220 Output Bch 4.7 Output Wch 4.7 4.7 4.7 100 4.7 4.7 100n SDA Input Bch AUX0 13 SDA AUX0 18 14 SCL AUX1 17 15 GND V+ 16 AUX1 V+ IN OUT V+ CNT CNT 22 Surround Sound IC or Sound Enhancement IC IN OUT Ex.) ealaBASS : NJM2706 BBE Mach3 : NJM2155 SRS TruBass : NJM2192A SRS WOW : NJM2700, NJM2195, ... , etc 2 (4) Separate the I C bus line and Signal line from the following terminals for avoiding digital noise problem and cross talk. Pin No. Symbol Pin No. Symbol 3 LF1 24 TONE-Lb 6 TONE-Ha 25 TONE-Hb 7 TONE-La 28 LF3 10 SUR-FIL 29 LF2 - 13 - NJW1176 APPLICATION CIRCUIT 3 Input Ach (SSOP32) 0.47 0.47 1 INa INb 32 2 CVW LF2 31 3 LF1 LF3 30 4 SUR OUTa 4.7 0.047 0.47 0.022 4.7 4.7 5 TONE INa SUR OUTb 29 TONE INb 28 2.2n 2.2n 6 TONE -Ha TONE-Hb 27 7 TONE -La TONE-Lb 26 100n 100n Output Ach 4.7 8 OUTa OUTb 25 9 AGC1 OUTw 24 330nF 10 SUR-FIL VREF 23 11 CVB CTH 22 12 CVA CTL 21 4.7 SCL 220 4.7 Output Wch 4.7 AUX0 13 SDA AUX0 20 14 SCL AUX1 19 15 GND V+ 18 16 N.C. N.C. 17 VAUX1 3.5V to V+ AUX1 10k V+ 22 2 Output Bch 4.7 4.7 100 4.7 4.7 100n SDA Input Bch V+ (4) Separate the I C bus line and Signal line from the following terminals for avoiding digital noise problem and cross talk. Pin No. Symbol Pin No. Symbol 3 LF1 26 TONE-Lb 6 TONE-Ha 27 TONE-Hb 7 TONE-La 30 LF3 10 SUR-FIL 31 LF2 - 14 - NJW1176 APPLICATION CIRCUIT 4 Input Ach (SSOP32) 0.47 0.47 1 INa INb 32 2 CVW LF2 31 3 LF1 LF3 30 4 SUR OUTa 4.7 0.047 0.47 0.022 4.7 4.7 SUR OUTb 29 TONE INb 28 4.7 4.7 5 TONE INa 2.2n 2.2n 6 TONE -Ha TONE-Hb 27 7 TONE -La TONE-Lb 26 100n 100n Output Ach 4.7 8 OUTa OUTb 25 9 AGC1 OUTw 24 330nF 10 SUR-FIL VREF 23 11 CVB CTH 22 12 CVA CTL 21 4.7 SCL 220 Output Bch 4.7 Output Wch 4.7 4.7 4.7 100 4.7 4.7 100n SDA Input Bch AUX0 13 SDA AUX0 20 14 SCL AUX1 19 15 GND V+ 18 16 N.C. N.C. 17 AUX1 V+ IN OUT V+ CNT CNT 22 Surround Sound IC or Sound Enhancement IC IN OUT Ex.) ealaBASS : NJM2706 BBE Mach3 : NJM2155 SRS TruBass : NJM2192A SRS WOW : NJM2700, NJM2195, ... , etc 2 (4) Separate the I C bus line and Signal line from the following terminals for avoiding digital noise problem and cross talk. Pin No. Symbol Pin No. Symbol 3 LF1 26 TONE-Lb 6 TONE-Ha 27 TONE-Hb 7 TONE-La 30 LF3 10 SUR-FIL 31 LF2 - 15 - NJW1176 2 DEFINITION OF I C REGISTER 2 I C BUS FORMAT MSB S LSB Slave Address 1bit 8bit MSB LSB A Select Address 1bit 8bit MSB LSB A 1bit Data A P 8bit 1bit 1bit S: Starting Term A: Acknowledge Bit P: Ending Term SLAVE ADDRESS R/W = 0 : Receive Only. R/W = 1: No Output Data Slave Address 1 0 0 0 Hex 0 0 1 0 82(h) CONTROL REGISTER TABLE The select address sets each function (Volume, Balance, Bass Boost Select, AGC, Surround, Tone Control, AUX). The auto increment function cycles the select address as follows. 00H01H02H03H04H05H00H <Write Mode> Select Address 00H 01H 02H 03H 04H 05H BIT D7 D6 D4 D5 D3 D2 D1 D0 VOL BAL CHS BCB BCT BBSW BASS TREB TRIM SUR AUX1 AUX0 AGC : Don't Care AGCL CONTROL REGISTER DEFAULT VALUE Control register default value is all "0". BIT Select Address D7 D6 D5 D4 D3 D2 D1 D0 00H 01H 02H 03H 04H 05H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 16 - NJW1176 INSTRUCTION CODE a) MASTER VOLUME SETTING Select Address BIT D7 D6 D5 D4 D3 D2 D1 D0 00H VOL *VOL Attenuation level : 0 to -80dB(0.33dB/step) , MUTE The attenuator is consisted of both the VOL1(0.165dB/step)and VOL2(0.165dB/step) and is enable to adjust 0.33dB/step. The attenuation for both the VOL1and VOL2 are always synchronized to have the same attenuation levels for each other, and are not controllable independently for each other. ex) VOL(-30dB) = VOL1(-15dB) + VOL2(-15dB) b) BALANCE AND BASS BOOST FUNCTION SETTING BIT Select Address D7 01H CHS D6 D5 D4 D3 D2 D1 BAL D0 BBSW *CHS : Channel select for balance control "0" : Ach "Bch is attenuated" "1" : Bch "Ach is attenuated" *BAL : Balance control for both Ach and Bch Balance Level : 0 to -60dB (1dB/Step) , MUTE *BBSW : Bass Boost ON/OFF Switch "0" = Bass Boost OFF "1" = Bass Boost ON c) TONE CONTROL BASS SETTING BIT Select Address D7 02H BCB D6 D5 D4 D3 D2 D1 BASS D0 Don't Care *BCB : Boost cut select for Bass control "0" : Cut "1" : Boost *BASS : BASS Level Setting Cut Level : -15 to 0dB(0.5dB/Step) Boost Level : 0 to +15dB(0.5dB/Step) d) TONE CONTROL TREBLE SETTING BIT Select Address D7 03H BCT D6 D5 D4 D3 D2 TREB D1 D0 Don't Care *BCT : Boost cut select for Treble control "0" : Cut "1" : Boost *TREB : TREBLE Level Setting Cut Level : -15 to 0dB(0.5dB/Step) Boost Level : 0 to +15dB(0.5dB/Step) e) TRIMMER LEVEL SETTING Select Address BIT D7 D6 D5 D4 04H TRIM *TRIM : Trimmer Level Trimmer Level : +18 to -44dB (0.5dB/Step) , MUTE D3 D2 D1 D0 Don't Care - 17 - NJW1176 d) SURROUND, AUXILIARY, AGC LEVEL SETTING Select Address BIT D7 05H D6 D5 SUR D4 AUX1 D3 AUX0 D2 D1 AGCL D0 AGC <SUR : Surround Level Setting> Surround Setting Surround Off Simulated Stereo Surround Effect1 Surround Effect2 D7 0 0 1 1 D6 0 1 0 1 <AUX1 : AUX1 Terminal Setting> Auxiliary Setting Low (0.0V) High (5.0V) D5 0 1 <AUX0 : AUX0 Terminal Setting> Auxiliary Setting Low (0.0V) Mid (2.5V) High (5.0V) D4 0 1 D3 0 1 1 D2 0 0 1 1 D1 0 1 0 1 <AGCL : AGC Level Setting> AGC Level Setting 100mVrms 200mVrms 300mVrms 400mVrms <AGC : AGC Setting> AGC Setting OFF ON - 18 - D0 0 1 Remarks Surround Off Simulated Stereo Surround Effect Low(8.3dB typ.) Surround Effect High(12.7dB typ.) NJW1176 Master Volume (Select Address : 00H) VOL Gain(dB) HEX D7 D6 D5 D4 D3 D2 D1 D0 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - 19 - NJW1176 VOL Gain(dB) HEX D7 D6 D5 D4 D3 D2 D1 D0 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 MUTE 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 : Default Value - 20 - NJW1176 Balance, Bass Boost Setting (Select Address : 01H) Channel Setting (CHS) D7 Decrease Bch Gain Decrease Ach Gain 0 1 Gain(dB) BAL D6 D5 D4 D3 D2 D1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 -22 -23 0 0 1 1 0 0 1 1 1 1 0 1 -24 -25 -26 -27 -28 -29 -30 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 : Default Value - 21 - NJW1176 Gain(dB) BAL D5 D4 D3 D2 D1 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 D6 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 -56 -57 1 1 1 1 1 1 0 0 0 0 0 1 -58 -59 -60 MUTE 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1 1 0 1 0 1 0 1 Bass Boost Setting (BBSW) D0 Bass Boost Off Bass Boost On 0 1 : Default Value - 22 - NJW1176 Tone Control(Bass Setting) (Select Address : 02H) Bass Cut or Boost BCB D7 Cut Boost 0 1 BASS Cut Gain(dB) Boost Gain(dB) D6 D5 D4 D3 D2 -15.0 -14.5 -14.0 -13.5 -13.0 -12.5 -12.0 -11.5 -11.0 -10.5 -10.0 -9.5 -9.0 -8.5 -8.0 -7.5 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 0 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0 : Default value - 23 - NJW1176 Tone Control(Treble Setting) (Select Address : 03H) Treble Cut or Boost BCT D7 Cut Boost 0 1 TREB Cut Gain(dB) Boost Gain(dB) D6 D5 D4 D3 D2 -15.0 -14.5 -14.0 -13.5 -13.0 -12.5 -12.0 -11.5 -11.0 -10.5 -10.0 -9.5 -9.0 -8.5 -8.0 -7.5 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 0 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0 : Default value - 24 - NJW1176 Trimmer Setting (Select Address: 04H) TRIM Gain(dB) D7 D6 D5 D4 D3 D2 D1 +18.0 +17.5 +17.0 +16.5 +16.0 +15.5 +15.0 +14.5 +14.0 +13.5 +13.0 +12.5 +12.0 +11.5 +11.0 +10.5 +10.0 +9.5 +9.0 +8.5 +8.0 +7.5 +7.0 +6.5 +6.0 +5.5 +5.0 +4.5 +4.0 +3.5 +3.0 +2.5 +2.0 +1.5 +1.0 +0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - 25 - NJW1176 TRIM Gain(dB) D7 D6 D5 D4 D3 D2 D1 -6.5 -7.0 -7.5 -8.0 -8.5 -9.0 -9.5 -10.0 -10.5 -11.0 -11.5 -12.0 -12.5 -13.0 -13.5 -14.0 -14.5 -15.0 -15.5 -16.0 -16.5 -17.0 -17.5 -18.0 -18.5 -19.0 -19.5 -20.0 -20.5 -21.0 -21.5 -22.0 -22.5 -23.0 -23.5 -24.0 -24.5 -25.0 -25.5 -26.0 -26.5 -27.0 -27.5 -28.0 -28.5 -29.0 -29.5 -30.0 -30.5 -31.0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 - 26 - NJW1176 TRIM Gain B D7 D6 D5 D4 D3 D2 D1 -31.5 -32.0 -32.5 -33.0 -33.5 -34.0 -34.5 -35.0 -35.5 -36.0 -36.5 -37.0 -37.5 -38.0 -38.5 -39.0 -39.5 -40.0 -40.5 -41.0 -41.5 -42.0 -42.5 -43.0 -43.5 -44.0 MUTE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 : Default value [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - 27 -