P79E.pdf Feb.5,2018 Crystal Units/Crystal Oscillators !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant F**2&#.0-"3!21',2&'1!2*-%!-+.*7 5'2& - @ F - '12&# 30-.#,'0#!2'4# |z{{GG -,2&##120'!2'-,-$2&# 1#-$#02', 80"-313 12,!#1', *#!20'!*," *#!20-,'! /3'.+#,2@ FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5# .%#A3021..0-!&$-0 - H&22.1BGG555@+302@!-+G#,Q#3G13..-02G !-+.*',!#G0-&1J@ P79E.pdf Feb.5,2018 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 1 Contents Product specifications are as of January 2018. Bluetoothr is a registered trademark or trademark of Bluetooth SIG, Inc. in the United States and other countries. Selection Guide p2 Part Numbering p3 2 1 Crystal Units for Consumer Features, Applications p5 Appearance, Dimension p5 Series p6 Part Number List p6 Standard Land Pattern Dimensions p10 Notice p11 Packaging p16 2 Crystal Units for Automotive Features, Applications p20 Appearance, Dimension p20 Series p20 Part Number List p21 Standard Land Pattern Dimensions p22 Notice p23 Packaging p25 3 Crystal Units for Industrial Features, Applications p26 Appearance, Dimension p26 Series p27 Part Number List p27 Standard Land Pattern Dimensions p29 Notice p30 Packaging p32 4 Crystal Oscillators for Industrial Features, Applications p35 Appearance, Dimension p35 Series p35 Part Number List p36 Standard Land Pattern Dimensions p37 Notice p38 Packaging p40 Measuring Circuit of Crystal Units p42 Please check the MURATA website (https://www.murata.com/) if you cannot find a part number in this catalog. 3 4 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Selection Guides Applications Consumer Automotive Car Multimedia (Limited Applications) Industrial Crystal Units Crystal Units Crystal Units Crystal Units Crystal Units Crystal Oscillators 10ppm HCR2016 10ppm MCR1210 30/50/100ppm HCR2016 30/50/100ppm HCR2016 100ppm HCR2016 1ppm TTS27NSC-A7 XRCGB_F_G XRCGB_F_Z XNCHH 2.0x1.6x0.7mm 24.0000-48.0000MHz 2.0x1.6x0.7mm 16.0000-50.0000MHz 2.5x2.0x1.0mm 10.0000-52.0000MHz XRCGB_F_H 2.0x1.6x0.7mm 24.0000-32.0000MHz 20ppm HCR2016 XRCGB_F_P 2.0x1.6x0.7mm 16.0000-38.4000MHz XRCTD XRCGB_F_A 1.2x1.0x0.3mm 32.0000-52.0000MHz 2.0x1.6x0.7mm 24.0000-48.0000MHz MCR1612 HCR2520 XRCFD XRCHA_F_A 1.6x1.2x0.35mm 24.0000-29.9999MHz 2.5x2.0x0.8mm 16.0000-24.0000MHz TTS27VSC-A7 XRCPB_F_Z 2.0x1.6x0.5mm 24.0000-50.0000MHz HCR2520 XTCHH 2.5x2.0x1.0mm 10.0000-52.0000MHz TTS18NSH-A7 XRCPB_F_P 2.0x1.6x0.5mm 24.0000-32.0000MHz 30/45ppm HCR2016 XRCMD XRCHA_F_Z 1.6x1.2x0.33mm 30.0000-48.0000MHz 2.5x2.0x0.8mm 16.0000-20.0000MHz TDS-2520F 10ppm TAS-2520F XNCJH 3.2x2.5x1.0mm 10.0000-52.0000MHz TTS18VSH-A7 XRCGB_F_M 2.0x1.6x0.7mm 16.0000-50.0000MHz XRCHJ 2.5x2.0x0.5mm 16.0000-52.0000MHz TSS-3225J XRCPB_F_M XTCJH XRCHH 2.5x2.0x0.5mm 16.0000-52.0000MHz TAS-3225J 2.0x1.6x0.5mm 24.0000-50.0000MHz 3.2x2.5x1.0mm 10.0000-52.0000MHz 0.5ppm TTS14VSH/TTS14VCH XRCJK 100ppm HCR2016 3.2x2.5x0.8mm 12.0000-52.0000MHz TSS-5032A XRCGB_F_L 2.0x1.6x0.7mm 16.0000-50.0000MHz TAS-5032F XRCLK 5.0x3.2x1.05mm 10.0000-52.0000MHz XRCPB_F_L 2.0x1.6x0.5mm 24.0000-50.0000MHz HCR2520 XRCHA_F_L 2.5x2.0x0.8mm 16.0000-20.0000MHz 2 XRCJH 3.2x2.5x0.6mm 13.0000-52.0000MHz XRCLH 5.0x3.2x1.0mm 10.0000-52.0000MHz XTCLH_J 5.0x3.2x1.5mm 10.0000-50.0000MHz !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Feb.5,2018 o Part Numbering Crystal Unit (Part Number) XR C GB 24M000 F 1 2 3 4 0 L 5 6 7 00 R0 8 9 6Frequency Tolerance 1Product ID Product ID XR Crystal Unit 2Lead Style Code Frequency Tolerance 0 100ppm 1 10ppm 2 20ppm Code Lead Style 3 30ppm C/T SMD 4 45ppm/40ppm*1 3Size * Structure Code Size * Structure TD 1210 (STD) Metal Sealing FD 1612 (STD) Metal Sealing MD 1612 (Low Profile) Metal Sealing GB 2016 (STD) Resin Sealing 5 50ppm A 25ppm/15ppm*2 Y Total*320ppm *1 *2 When 3 is "HH" or "JK" *3 Including Initial Torelance+Temperature Characteristics+Aging+Reflow 7Frequency Shift by Temperature PB 2016 (Low Profile) Resin Sealing Code Frequency Shift by Temperature HA 2520 Resin Sealing A 100ppm max. (Automotive Grade) HH 2520 Metal Sealing G 50ppm (Car Multimedia Grade) HJ 2520 Seam Sealing L 50ppm min. JH 3225 Metal Sealing M 40ppm JK 3225 Seam Sealing N 25ppm or 30ppm LH 5032 Metal Sealing P 20ppm LK 5032 Seam Sealing H/Q 10ppm to 15ppm/10ppm to 19ppm*1 Z 100ppm (for Industrial) 4Nominal Center Frequency Expressed by six-digit alphanumeric. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". *1 When 3 is "HH" or "JK" 8Individual Specification Code 5Overtone Order Code Overtone Order F Fundamental K Customized Fundamental ** Two-digit alphanumerics express Individual Specification. 00: Standard specification type. 9Packaging (Quantity and Plastic taping reel diameter are expressed by one-digit number in "*") Code Packaging R*/E*/J*/P* Plastic Taping 3 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Crystal Oscillator (Part Number) XN C HH 19M200 T 1 2 3 4 J E 5 6 7 A5 P0 8 9 6Frequency Tolerance 1Product ID Product ID XT VC-TCXO XN TCXO Code Frequency Tolerance J 1.0 to 1.4ppm 7Frequency Shift by Temperature 2Lead Style Code Lead Style E 0.5ppm max. C SMD J Less than 0.3ppm 8Individual Specification 3Size * Structure Code Size * Structure HH 2520 Metal Sealing JH 3225 Metal Sealing LH 5032 Metal Sealing Code ** Two-digit alphanumerics express Individual Specification. 9Packaging (Quantity and Plastic taping reel diameter are expressed by one-digit number in "*") 4Nominal Center Frequency Expressed by six-digit alphanumeric. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M". 5Output Wave 4 Frequency Shift by Temperature Code Code Output Wave T Clipped Sign Wave C CMOS Code Packaging E*/G*/P* Plastic Taping P79E.pdf Feb.5,2018 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Crystal Units RoHS Lead free 1 for Consumer 1.20.1 1.00.1 These crystal units feature a small package and highly accurate frequency, based on Murata's excellent package technology and high grade quartz crystal elements. 0.63 (2) 0.60 XRCTD (MCR1210) 32.0000-52.0000MHz (4) Marking Monthly Code (in mm) (3) 0.42 1.60.1 0.68 (2) XRCFD (MCR1612) 24.0000-29.9999MHz (4) 1.20.1 0.68 (4) (3) (in mm) (0.15) 1.30.1 0.250.1 (0.1) (0.1) (1.4) 0.250.1 XRCPB (HCR2016) 24.0000-50.0000MHz (2) 0.90.1 Marking Monthly Code 0.50.1 0.90.1 (1) (1) Crystal Terminal (2) No Connect (3) Crystal Terminal (0.2) (0.1) 0.50.1 (2) 0.450.05 1.60.1 (0.1) (0.1) (1.4) 1.60.1 0.650.05 (1.8) (0.3) (0.1) 0.250.1 0.50.1 0.250.1 Marking Monthly Code (in mm) (3) 0.450.08 (0.1) 1.30.1 (1) Crystal Terminal (2) No Connect (3) Crystal Terminal (4) GND 2.00.1 (1.8) (0.15) (2) 0.450.08 1.08 2.00.1 (1) Marking Monthly Code (in mm) (3) 1.60.1 XRCMD (MCR1612) 30.0000-48.0000MHz 0.50.1 (1) Crystal Terminal (2) No Connect (3) Crystal Terminal (4) GND 0.450.08 (1) (0.1) 0.450.08 1.08 (1) 0.33 max. 1. Clock for GPS controller ICs: smartphone, wearable equipment, module, etc. 2. Clock for Wi-Fi, B.T. and ACPU controller ICs: smartphone, wearable device, module, etc. 3. Clock for BLE controller ICs: wearable, fitness and healthcare devices, module, etc. 4. Storage devices with SATA interface: HDD, SSD, Optical storage device, etc. 5. Clock for USB (Ultra-Speed and High-Speed) controller ICs: Mobile phone, DVC, DSC, Portable audio, PC peripheral, etc. 6. Clock for PC, visual equipment controller ICs 7. Audio equipment and musical instrument, etc. 8. Other applications for replacement of other crystal units or oscillators. 0.35 max. Applications XRCGB (HCR2016) 16.0000-50.0000MHz (1) Crystal Terminal (2) GND (3) Crystal Terminal (4) No Connect 0.35 (1) 1.20.1 1. This series is ideal for applications requiring high accuracy crystal units, especially communication clocks such as GPS, Wi-Fi, B.T. (Bluetoothr), BLE (Bluetoothr Low Energy), SATA and USB3.0. 2. The crystal units are extremely small, contributing to a reduction in the mounting area. 3. The series complies to RoHS directive, being lead-free (phase 3). 0.30 max. Features (1) Crystal Terminal (2) No Connect (3) Crystal Terminal Marking Monthly Code (3) (in mm) Continued on the following page. 5 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Continued from the preceding page. 2.50.1 2.00.1 0.450.05 (0.3) 0.650.1 (0.2) 0.650.1 0.850.1 (1) 1.450.1 0.70.2 0.40.1 XRCHJ (TDS-2520F) 16.0000-52.0000MHz Marking Monthly Code (4) 3.20.2 (in mm) 0.40.1 Marking Pin Connection (1) (3): Crystal Terminal (2) (4): Case GND (1) (3) 1.20.1 (2) C0.5 XRCLK (TSS-5032A) 10.0000-52.0000MHz (in mm) 1.40.2 C0.3 0.90.2 1.20.2 1.20.2 0.90.1 (2) (4) Pin Connection (1) (3): Crystal Terminal (2) (4): Case GND 0.90.2 0.90.1 0.90.1 0.70.1 2.50.1 1.00.1 (4) (3) 5.00.2 1.00.1 (1) Pin Connection (1) (3): Crystal Terminal (2): No Connect (4): Case GND 1.10.1 (in mm) 3.20.1 0.70.1 (2) C0.3 0.40.1 XRCJK (TSS-3225J) 12.0000-52.0000MHz 0.60.1 (0.2) Marking 0.60.1 (2.4) (0.2) (0.2) (1.9) 2.00.1 0.70.1 1 XRCHA_F_L (HCR2520) 16.0000-20.0000MHz 0.150.1 2.50.1 (3) 2.60.2 (in mm) Series Series XRCTD XRCFD XRCMD Type Package MCR1210 MCR1612 32.0000 to 52.0000 Metal 24.0000 to 25.0000 XRCGB_F_M 16.0000 to 50.0000 XRCPB_F_M 24.0000 to 50.0000 XRCGB_F_L 16.0000 to 50.0000 XRCPB_F_L 24.0000 to 50.0000 XRCHA_F_L HCR2520 16.0000 to 20.0000 XRCHJ TDS-2520F 16.0000 to 52.0000 XRCJK TSS-3225J XRCLK TSS-5032A Seam Operating Temperature Range (C) 10 2 300 5 300*1 -20 to +70 -20 to +70 -30 to +85 40 (Total) 24.0000 to 38.4000 Resin 100 1 10 16.0000 HCR2016 Drive Level (W max.) -30 to +85 26.0000 to 32.0000 XRCGB_F_P Frequency Aging (ppm max./Year) 20ppm (Total) 24.0000 to 29.9999 30.0000 to 48.0000 XRCGB_F_H XRCPB_F_P Frequency Tolerance Frequency Shift (ppm max.) by Temperature (ppm max.) [at 25C3C] [Standard Condition: +25C] Frequency (MHz) 12.0000 to 52.0000 20 20 30/45 40 100 50 100 100 10 15 -30 to +85 3 60 10.0000 to 52.0000 XRCPB series is a low profile type of XRCGB series. *1 16MHz: 100W max. Part Number List <XRCED/XRCFD/XRCMD> Part Number Type Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) (max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (pF) (W max.) XRCTD37M400FXQ50R0 MCR1210 37.4000 20ppm (Total)(-30 to +85C) 60 6 100 XRCFD26M000FYQ01R0 MCR1612 26.0000 20ppm (Total)(-30 to +85C) 150 8 100 XRCMD32M000FXP50R0 MCR1612 32.0000 30ppm (Total)(-30 to +85C) 100 6 100 1 60 8 100 XRCMD37M400F1Q01R0 MCR1612 37.4000 10 10(-20 to +70C) XRCMD38M400FXQ56R0 MCR1612 38.4000 20ppm (Total)(-30 to +85C) 1 60 10 100 XRCMD40M000FXQ57R0 MCR1612 40.0000 20ppm (Total)(-30 to +85C) 1 60 10 100 * Equivalent Series Resistance 6 Continued on the following page. P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Continued from the preceding page. Part Number Type Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (max.) (pF) (W max.) XRCMD48M000FXQ58R0 MCR1612 48.0000 20ppm (Total)(-30 to +85C) 1 40 7 100 * Equivalent Series Resistance 1 <XRCGB_F_H> Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) (max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (pF) (W max.) Part Number Type XRCGB24M000F1H00R0 HCR2016 24.0000 10 10 (-20 to +70C) 2 80 6 300 XRCGB25M000F1H00R0 HCR2016 25.0000 10 10 (-20 to +70C) 2 80 6 300 XRCGB26M000F1H00R0 HCR2016 26.0000 10 10 (-30 to +85C) 2 60 6 300 XRCGB32M000F1H00R0 HCR2016 32.0000 10 10 (-30 to +85C) 2 60 6 300 * Equivalent Series Resistance <XRCGB_F_P/XRCPB_F_P> Part Number Type Frequency Shift Frequency Load Drive Frequency Frequency Tolerance ESR* (ppm max.) by Temperature (ppm max.) Aging Capacitance Level (MHz) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (max.) (pF) (W max.) XRCGB16M000FXN01R0 HCR2016 16.0000 40ppm (Total)(-30 to +85C) 5 200 8 100 XRCGB24M000F2P00R0 HCR2016 24.0000 20 XRCGB25M000F2P00R0 HCR2016 25.0000 20 20 (-30 to +85C) 5 150 6 300 20 (-30 to +85C) 5 150 6 XRCGB26M000F2P00R0 HCR2016 26.0000 300 20 20 (-30 to +85C) 5 150 6 XRCGB27M000F2P00R0 HCR2016 300 27.0000 20 20 (-30 to +85C) 5 150 6 XRCGB27M120F2P00R0 300 HCR2016 27.1200 20 20 (-30 to +85C) 5 150 6 300 XRCGB30M000F2P00R0 HCR2016 30.0000 20 20 (-30 to +85C) 5 100 6 300 XRCGB31M250F2P00R0 HCR2016 31.2500 20 20 (-30 to +85C) 5 100 6 300 XRCGB32M000F2P00R0 HCR2016 32.0000 20 20 (-30 to +85C) 5 100 6 300 XRCGB38M400F2P00R0 HCR2016 38.4000 20 20 (-30 to +85C) 5 100 6 300 XRCPB24M000F2P00R0 HCR2016 24.0000 20 20 (-30 to +85C) 5 150 6 300 XRCPB25M000F2P00R0 HCR2016 25.0000 20 20 (-30 to +85C) 5 150 6 300 XRCPB26M000F2P00R0 HCR2016 26.0000 20 20 (-30 to +85C) 5 150 6 300 XRCPB27M000F2P00R0 HCR2016 27.0000 20 20 (-30 to +85C) 5 150 6 300 XRCPB27M120F2P00R0 HCR2016 27.1200 20 20 (-30 to +85C) 5 150 6 300 XRCPB30M000F2P00R0 HCR2016 30.0000 20 20 (-30 to +85C) 5 100 6 300 XRCPB31M250F2P00R0 HCR2016 31.2500 20 20 (-30 to +85C) 5 100 6 300 XRCPB32M000F2P00R0 HCR2016 32.0000 20 20 (-30 to +85C) 5 100 6 300 Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) * Equivalent Series Resistance <XRCGB_F_M/XRCPB_F_M> Part Number Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] XRCGB24M000F3M00R0 HCR2016 24.0000 30 40 (-30 to +85C) 5 150 6 300 XRCGB24M576F3M00R0 HCR2016 24.5760 30 40 (-30 to +85C) 5 150 6 300 XRCGB25M000F3M00R0 HCR2016 25.0000 30 40 (-30 to +85C) 5 150 6 300 XRCGB26M000F3M00R0 HCR2016 26.0000 30 40 (-30 to +85C) 5 150 6 300 XRCGB27M000F3M00R0 HCR2016 27.0000 30 40 (-30 to +85C) 5 150 6 300 XRCGB27M120F3M00R0 HCR2016 27.1200 30 40 (-30 to +85C) 5 150 6 300 XRCGB30M000F3M00R0 HCR2016 30.0000 30 40 (-30 to +85C) 5 100 6 300 XRCGB31M250F3M00R0 HCR2016 31.2500 30 40 (-30 to +85C) 5 100 6 300 XRCGB32M000F3M00R0 HCR2016 32.0000 30 40 (-30 to +85C) 5 100 6 300 XRCGB33M868F4M00R0 HCR2016 33.8688 45 40 (-30 to +85C) 5 100 6 300 XRCGB38M400F4M00R0 HCR2016 38.4000 45 40 (-30 to +85C) 5 100 6 300 XRCGB40M000F4M00R0 HCR2016 40.0000 45 40 (-30 to +85C) 5 100 6 300 XRCGB48M000F4M00R0 HCR2016 48.0000 45 40 (-30 to +85C) 5 100 6 300 XRCGB50M000F4M00R0 HCR2016 50.0000 45 40 (-30 to +85C) 5 65 6 300 XRCPB24M000F3M00R0 HCR2016 24.0000 30 40 (-30 to +85C) 5 150 6 300 * Equivalent Series Resistance Continued on the following page. 7 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Continued from the preceding page. Part Number 1 Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) XRCPB24M576F3M00R0 HCR2016 24.5760 30 40 (-30 to +85C) 5 150 6 300 XRCPB25M000F3M00R0 HCR2016 25.0000 30 40 (-30 to +85C) 5 150 6 300 XRCPB26M000F3M00R0 HCR2016 26.0000 30 40 (-30 to +85C) 5 150 6 300 XRCPB27M000F3M00R0 HCR2016 27.0000 30 40 (-30 to +85C) 5 150 6 300 XRCPB27M120F3M00R0 HCR2016 27.1200 30 40 (-30 to +85C) 5 150 6 300 XRCPB30M000F3M00R0 HCR2016 30.0000 30 40 (-30 to +85C) 5 100 6 300 XRCPB31M250F3M00R0 HCR2016 31.2500 30 40 (-30 to +85C) 5 100 6 300 XRCPB32M000F3M00R0 HCR2016 32.0000 30 40 (-30 to +85C) 5 100 6 300 XRCPB33M868F4M00R0 HCR2016 33.8688 45 40 (-30 to +85C) 5 100 6 300 XRCPB40M000F4M00R0 HCR2016 40.0000 45 40 (-30 to +85C) 5 100 6 300 XRCPB48M000F4M00R0 HCR2016 48.0000 45 40 (-30 to +85C) 5 100 6 300 XRCPB50M000F4M00R0 HCR2016 50.0000 45 40 (-30 to +85C) 5 65 6 300 Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) * Equivalent Series Resistance <XRCGB_F_L/XRCPB_F_L> Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] Part Number Type XRCGB24M000F0L00R0 HCR2016 24.0000 100 50 (-30 to +85C) 5 150 6 300 XRCGB24M576F0L00R0 HCR2016 24.5760 100 50 (-30 to +85C) 5 150 6 300 XRCGB25M000F0L00R0 HCR2016 25.0000 100 50 (-30 to +85C) 5 150 6 300 XRCGB26M000F0L00R0 HCR2016 26.0000 100 50 (-30 to +85C) 5 150 6 300 XRCGB27M000F0L00R0 HCR2016 27.0000 100 50 (-30 to +85C) 5 150 6 300 XRCGB27M120F0L00R0 HCR2016 27.1200 100 50 (-30 to +85C) 5 150 6 300 XRCGB30M000F0L00R0 HCR2016 30.0000 100 50 (-30 to +85C) 5 100 6 300 XRCGB31M250F0L00R0 HCR2016 31.2500 100 50 (-30 to +85C) 5 100 6 300 XRCGB32M000F0L00R0 HCR2016 32.0000 100 50 (-30 to +85C) 5 100 6 300 XRCGB33M868F0L00R0 HCR2016 33.8688 100 50 (-30 to +85C) 5 100 6 300 XRCGB38M400F0L00R0 HCR2016 38.4000 100 50 (-30 to +85C) 5 100 6 300 XRCGB40M000F0L00R0 HCR2016 40.0000 100 50 (-30 to +85C) 5 100 6 300 XRCGB48M000F0L00R0 HCR2016 48.0000 100 50 (-30 to +85C) 5 100 6 300 XRCGB50M000F0L00R0 HCR2016 50.0000 100 50 (-30 to +85C) 5 100 6 300 XRCPB24M000F0L00R0 HCR2016 24.0000 100 50 (-30 to +85C) 5 150 6 300 XRCPB24M576F0L00R0 HCR2016 24.5760 100 50 (-30 to +85C) 5 150 6 300 XRCPB25M000F0L00R0 HCR2016 25.0000 100 50 (-30 to +85C) 5 150 6 300 XRCPB26M000F0L00R0 HCR2016 26.0000 100 50 (-30 to +85C) 5 150 6 300 XRCPB27M000F0L00R0 HCR2016 27.0000 100 50 (-30 to +85C) 5 150 6 300 XRCPB27M120F0L00R0 HCR2016 27.1200 100 50 (-30 to +85C) 5 150 6 300 XRCPB30M000F0L00R0 HCR2016 30.0000 100 50 (-30 to +85C) 5 100 6 300 XRCPB31M250F0L00R0 HCR2016 31.2500 100 50 (-30 to +85C) 5 100 6 300 XRCPB32M000F0L00R0 HCR2016 32.0000 100 50 (-30 to +85C) 5 100 6 300 XRCPB33M868F0L00R0 HCR2016 33.8688 100 50 (-30 to +85C) 5 100 6 300 XRCPB40M000F0L00R0 HCR2016 40.0000 100 50 (-30 to +85C) 5 100 6 300 XRCPB48M000F0L00R0 HCR2016 48.0000 100 50 (-30 to +85C) 5 100 6 300 XRCPB50M000F0L00R0 HCR2016 50.0000 100 50 (-30 to +85C) 5 100 6 300 Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) * Equivalent Series Resistance <XRCHA_F_L> Type XRCHA16M000F0L01R0 HCR2520 16.0000 100 100 (-30 to +85C) 5 100 8 300 XRCHA20M000F0L01R0 HCR2520 20.0000 100 100 (-30 to +85C) 5 80 8 300 * Equivalent Series Resistance 8 Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] Part Number P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 <XRCHJ> Part Number Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) XRCHJ16M000F1QB1P0 TDS-2520F 16.0000 10 15 (-30 to +85C) 3 100 8 60 XRCHJ19M200F1QA9P0 TDS-2520F 19.2000 10 15 (-30 to +85C) 3 100 8 60 XRCHJ20M000F1QA7P0 TDS-2520F 20.0000 10 15 (-30 to +85C) 3 80 8 60 XRCHJ26M000F1QD1P0 TDS-2520F 26.0000 10 15 (-30 to +85C) 3 80 8 60 XRCHJ36M000F1QA0P0 TDS-2520F 36.0000 10 15 (-30 to +85C) 3 80 8 60 XRCHJ40M000F1QB0P0 TDS-2520F 40.0000 10 15 (-30 to +85C) 3 80 8 60 XRCHJ52M000F1QA0P0 TDS-2520F 52.0000 10 15 (-30 to +85C) 3 80 8 60 Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) 1 * Equivalent Series Resistance <XRCJK> Part Number Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] XRCJK12M000F1QB4P0 TSS-3225J 12.0000 10 15 (-30 to +85C) 3 100 8 60 XRCJK13M000F1QA3P0 TSS-3225J 13.0000 10 15 (-30 to +85C) 3 100 8 60 XRCJK15M360F1QA0P0 TSS-3225J 15.3600 10 15 (-30 to +85C) 3 80 8 60 XRCJK20M000F1QB3P0 TSS-3225J 20.0000 10 15 (-30 to +85C) 3 80 8 60 XRCJK24M576F1QA0P0 TSS-3225J 24.5760 10 15 (-30 to +85C) 3 80 8 60 XRCJK26M000F1QC3P0 TSS-3225J 26.0000 10 15 (-30 to +85C) 3 80 8 60 XRCJK36M000F1QA0P0 TSS-3225J 36.0000 10 15 (-30 to +85C) 3 80 8 60 XRCJK40M000F1QA2P0 TSS-3225J 40.0000 10 15 (-30 to +85C) 3 80 8 60 XRCJK52M000F1QA0P0 TSS-3225J 52.0000 10 15 (-30 to +85C) 3 80 8 60 Frequency Aging (ppm max./Year) ESR* (max.) Load Capacitance (pF) Drive Level (W max.) * Equivalent Series Resistance <XRCLK> Part Number Type Frequency Shift Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) (MHz) [at 25C3C] [Standard Condition: +25C] XRCLK10M000F1QA8P0 TSS-5032A 10.0000 10 15 (-30 to +85C) 3 80 8 60 XRCLK12M000F1QA6P0 TSS-5032A 12.0000 10 15 (-30 to +85C) 3 60 8 60 XRCLK14M745F1QB6P0 TSS-5032A 14.7456 10 15 (-30 to +85C) 3 60 8 60 XRCLK16M000F1QA7P0 TSS-5032A 16.0000 10 15 (-30 to +85C) 3 60 8 60 XRCLK21M250F1QA8P0 TSS-5032A 21.2500 10 15 (-30 to +85C) 3 60 8 60 XRCLK52M000F1QA0P0 TSS-5032A 52.0000 10 15 (-30 to +85C) 3 60 8 60 * Equivalent Series Resistance 9 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Standard Land Pattern Dimensions XRCTD (MCR1210) XRCFD, XRCMD (MCR1612) (Recommended Land Pattern) (Recommended Land Pattern) 0.70 0.495 0.70 0.40 0.60 0.20 0.40 0.25 0.495 0.60 1 0.21 0.30 (in mm) (in mm) XRCGB_F_H/P/M/L, XRCPB_F_P/M/L (HCR2016) XRCHA_F_L (HCR2520) (Recommended Land Pattern) (Recommended Land Pattern) 0.4 0.75 0.70 2.2 0.30 0.70 0.75 0.60 1.35 (in mm) (in mm) XRCHJ (TDS-2520F) XRCJK (TSS-3225J) 2.2 1.15 0.95 1.4 1.6 1.8 1.0 1.4 (in mm) XRCLK (TSS-5032A) 2.4 1.2 1.5 3.9 (in mm) 10 (in mm) P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Notice -Crystal Units for Consumer- 1 1.1. Soldering Condition Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (C) <XRCTD Series> Notice (Soldering and Mounting) Peak 260 245 220 Heating (220C min.) 180 150 Pre-heating (150 to 180C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180C 220C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245C min. 260C max. 10 sec. max. 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, the damage of sealing part between the metal cap and the substrate may occur. 2. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Continued on the following page. 11 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Notice -Crystal Units for Consumer- 1 Continued from the preceding page. Notice (Handling) 1. Please confirm the circuit conditions on your set, because irregular or stop oscillation may occur under unmatched circuit conditions. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 3. Please do not use these products in the following applications in transportation equipment: vehicles, trains, ships, etc. (example: engine control, brake control, steering control, body control.) 1.1. Soldering Condition Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (C) <XRCFD, XRCMD Series> Notice (Soldering and Mounting) Peak 260 245 220 Heating (220C min.) 180 150 Pre-heating (150 to 180C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180C 220C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245C min. 260C max. 5 sec. max. 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, the damage of sealing part between the metal cap and the substrate may occur. 2. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 12 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Feb.5,2018 Notice -Crystal Units for Consumer- 1 Continued from the preceding page. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Please confirm circuit the conditions on your set, because irregular or stop oscillation may occur under unmatched circuit conditions. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 3. Please do not use these products in the following applications in transportation equipment: vehicles, trains, ships, etc. (example: engine control, brake control, steering control, body control.) 13 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Notice -Crystal Units for Consumer<XRCGB_F_H/P/M/L, XRCPB_F_P/M/L, XRCHA_F_L, XRCHJ, XRCJK, XRCLK Series> Notice (Soldering and Mounting) 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (C) 1 Peak 260 245 220 Heating (220C min.) 180 150 Pre-heating (150 to 180C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180C 220C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245C min. 260C max. 5 sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Please keep solder away from the metal cap (Lid) portion. Condition Pre-heating 150C 60 sec. Heating of the Soldering Iron 350C max. Watt 30W max. Shape of the Soldering Iron o3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, the damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 14 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Feb.5,2018 Notice -Crystal Units for Consumer- 1 Continued from the preceding page. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable. Please be sure to consult with our sales representative or engineer prior to using the products. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Please confirm circuit the conditions on your set, because irregular or stop oscillation may occur under unmatched circuit conditions. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 3. Please do not use these products in the following applications in transportation equipment: vehicles, trains, ships, etc. (example: engine control, brake control, steering control, body control.) 15 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for Consumer- 1 Dimensions of Taping 8.0+0.3 -0.1 (1.1 max.) 4.00.1 0.450.1 4 3 3.50.1 1 2 (5.3) o0.50.1 1.30.1 0.250.1 o1.5+0.1 -0.0 2.00.1 1.50.1 4.00.1 1.750.1 XRCTD (MCR1210) (5) Cover Film 10 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Direction of Feed (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape o180mm 3,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (o180 -1.5 ) 450 to 560 o13.00.2 2.00.5 9.0 +1.0 0 13.01.0 (in mm) 16 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for Consumer- 1 Dimensions of Taping XRCFD, XRCMD (MCR1612) Direction of Feed Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Direction of Feed 1.750.1 1.750.1 (1.5 max.) 3.50.1 4.00.1 Cover Film 0.250.05 o1.00.1 2.250.1 (1.2 max.) 10 0.600.1 5 max. 0.250.1 4.00.1 o1.5+0.1 -0.0 8.00.2 2.00.1 0.850.1 1.750.1 4.00.1 o1.00.1 1.850.1 Cover Film (in mm) (5.5) (5.5) 3.50.1 o1.5+0.1 -0.0 8.00.2 2.00.1 Direction of Feed XRCHA_F_L (HCR2520) 2.250.1 XRCPB_F_P/M/L (HCR2016) 4.00.1 8.00.2 3.50.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) 2.750.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. 1.000.1 10 0.250.1 5 max. Cover Film 10 (1.6 max.) o1.00.1 1.850.1 4.00.1 (3) Cover Film o1.5+0.1 -0.0 (5.5) (1.15 max.) 4.00.1 2.00.1 2.250.1 1.750.1 3.50.1 0.250.1 o0.80.1 1.450.1 4.00.1 8.00.2 4 3 o1.5+0.1 -0.0 0.550.1 1 2 (5.5) 2.00.1 1.850.1 4.00.1 XRCGB_F_H/P/M/L (HCR2016) (5) 10 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) Direction of Feed (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape o180mm Plastic Tape o330mm 3,000 9,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (o180 -1.5 ) 400 to 560 o13.00.2 2.00.5 9.0 +1.0 0 13.01.0 (in mm) 17 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for ConsumerDimensions of Taping XRCJK (TSS-3225J) Drawing Out Direction Drawing Out Direction o1.20 A 4 2 3 (3.0) A' B 2.3 (3.0) A-A' Section 1 4 2 3 2.9 Material: Black Conductive PS Note 1) Radius "R" not mentioned is 0.3 max. 2) The tolerance not mentioned is 0.1. 1.25 +0.07 -0.05 5 max. (in mm) 4.0 1.75 4.0 o1.5+0.1 -0.0 0.30.05 B-B' Section 1 3.50.05 B' 10 pitches cumulative 40.00.1 2.00.05 0.8 2.7 4.0 1.75 4.0 o1.5+0.1 -0.0 8.00.2 2.00.05 3.50.05 10 pitches cumulative 40.00.2 0.250.05 3.6 XRCHJ (TDS-2520F) 8.00.2 1 5 max. o1.0+0.1 -0.0 Note 1) Radius "R" not mentioned is 0.3 max. 2) The tolerance not mentioned is 0.1. 3) The #1 pin is shown by the black dot. The black dot is not printed on the top of crystal unit. Refer to the drawing for contents of marking, (in mm) (Frequency, lot number). Minimum Quantity/Dimensions of Reel Plastic Tape o180mm 3,000 (pcs.) Trailer 500 min. 3 J Empty +1.0 o60 -0 3 J Leader Cover Film Components 3-2.00.5 Empty 150 min. 250 min. o130.2 J Mark for placing label 120 +3 9.0 -0 11.41 18 o180 (in mm) P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for Consumer- 1 Dimensions of Taping XRCLK (TSS-5032A) Drawing Out Direction 10 pitches cumulative 40.00.1 4 2 3 5 max. 1.75 5 max. o1.5+0.1 -0.0 3.7 1.4 0.30.05 5.5 1 4.0 5.50.05 8.0 o1.5+0.1 -0.0 12.00.3 2.00.05 Note 1) Radius "R" not mentioned is 0.3 max. 2) The tolerance not mentioned is 0.1. (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape o255mm 3,000 (pcs.) Trailer 500 min. 2.0 Leader Cover Film R1.5 Empty 20 Components 2.00.5 2.0 3-R1 R4.5 18.4 max. 250 min. 3-120 R12.5 13.51.0 Empty 150 min. 60.5 130.3 800.5 2.0 60 2551 (in mm) 19 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Crystal Units Feb.5,2018 AECQ200 RoHS Lead free for Automotive (1.9) 2.00.1 0.70.1 2 These crystal units for automotive feature a small package and highly accurate frequency, based on Murata's excellent package technology and high grade quartz crystal elements. (0.2) (0.2) 2.50.1 (2.4) (0.3) Features (0.2) (0.2) 0.850.1 0.40.1 XRCHA_F_A (HCR2520) 16.0000-24.0000MHz Marking Monthly Code 1.450.1 0.40.1 (in mm) (1.8) (0.2) (0.2) 0.650.05 1. Power Train (ex. Engine/Transmission management ECU) 2. ADAS (ex. Camera for driver assist, Image processing, Emergency Brake Assist ECU) 3. Chassis, Safety applications, etc. 4. Car multimedia equipment. (1.4) 1.60.1 Applications (0.2) 2.00.1 (0.3) (0.2) 0.50.1 (1) (2) 0.50.1 XRCGB_F_A (HCR2016) 24.0000-48.0000MHz (1) (3): Crystal Terminal (2) (4): No Connect 0.90.1 1. The series has high reliability and is available for a wide temperature range. 2. The crystal units are extremely small, contributing to a reduction in the mounting area. 3. The series complies to RoHS and ELV directives, being lead-free (phase 3). 4. The series complies to AEC-Q200. (4) Marking Monthly Code (3) 1.30.1 (0.15) (in mm) (2) 0.90.1 0.50.1 (1) XRCGB_F_G (HCR2016) 24.0000-48.0000MHz (0.1) (0.1) (0.3) (0.1) 0.50.1 (0.15) 1.30.1 0.250.1 (0.1) (1.4) 1.60.1 (1.8) 0.650.05 2.00.1 (1) Crystal Terminal (2) No Connect (3) Crystal Terminal Marking Monthly Code (3) 0.250.1 (in mm) Series Series Type Package XRCHA_F_A HCR2520 XRCGB_F_A 16.0000 to 24.0000 Resin HCR2016 XRCGB_F_G * +150C is available. 20 Frequency (MHz) Frequency Tolerance Frequency Shift Frequency Operating (ppm max.) by Temperature (ppm max.) Aging Temperature [at 25C3C] [Standard Condition: +25C] (ppm max./Year) Range (C) 100 100 5 30/50 35/65 2 30/45/100 50 5 24.0000 to 48.0000 Applications ADAS, -40 to +125* Power Train, Chassis, Safety ADAS, -40 to +125 Power Train, Chassis, Safety -40 to +85 Car Multimedia P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Part Number List <XRCHA_F_A (For Automotive)> Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (max.) Part Number Type XRCHA16M000F0A01R0 HCR2520 16.0000 100 100 (-40 to +125C) 5 100 8 300 XRCHA16M000F0A11R0 HCR2520 16.0000 100 100 (-40 to +125C) 5 100 8 600 XRCHA16M000F0A12R0 HCR2520 16.0000 100 100 (-40 to +150C) 5 100 8 300 XRCHA16M000F0A13R0 HCR2520 16.0000 100 100 (-40 to +150C) 5 100 8 600 XRCHA20M000F0A01R0 HCR2520 20.0000 100 100 (-40 to +125C) 5 80 8 300 XRCHA20M000F0A11R0 HCR2520 20.0000 100 100 (-40 to +125C) 5 80 8 600 XRCHA20M000F0A12R0 HCR2520 20.0000 100 100 (-40 to +150C) 5 80 8 300 XRCHA20M000F0A13R0 HCR2520 20.0000 100 100 (-40 to +150C) 5 80 8 600 XRCHA24M000F0A01R0 HCR2520 24.0000 100 100 (-40 to +125C) 5 80 8 300 XRCHA24M000F0A11R0 HCR2520 24.0000 100 100 (-40 to +125C) 5 80 8 600 XRCHA24M000F0A12R0 HCR2520 24.0000 100 100 (-40 to +150C) 5 80 8 300 XRCHA24M000F0A13R0 HCR2520 24.0000 100 100 (-40 to +150C) 5 80 8 600 2 * Equivalent Series Resistance <XRCGB_F_A (For Automotive)> Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (max.) (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) Part Number Type XRCGB24M000F3A00R0 HCR2016 24.0000 30 35 (-40 to +125C) 2 120 6 300 XRCGB25M000F3A00R0 HCR2016 25.0000 30 35 (-40 to +125C) 2 100 6 300 XRCGB26M000F3A00R0 HCR2016 26.0000 30 35 (-40 to +125C) 2 80 6 300 XRCGB27M000F3A00R0 HCR2016 27.0000 30 35 (-40 to +125C) 2 80 6 300 XRCGB27M120F3A00R0 HCR2016 27.1200 30 35 (-40 to +125C) 2 80 6 300 XRCGB30M000F5A00R0 HCR2016 30.0000 50 65 (-40 to +125C) 2 70 6 300 XRCGB40M000F5A00R0 HCR2016 40.0000 50 65 (-40 to +125C) 2 70 6 300 XRCGB48M000F5A00R0 HCR2016 48.0000 50 65 (-40 to +125C) 2 60 6 300 * Equivalent Series Resistance <XRCGB_F_G (For Car Multimedia)> Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (max.) Part Number Type XRCGB24M000F0G00R0 HCR2016 24.0000 100 50 (-40 to +85C) 5 150 6 300 XRCGB24M000F3G00R0 HCR2016 24.0000 30 50 (-40 to +85C) 5 150 6 300 XRCGB24M576F0G00R0 HCR2016 24.5760 100 50 (-40 to +85C) 5 150 6 300 XRCGB24M576F3G00R0 HCR2016 24.5760 30 50 (-40 to +85C) 5 150 6 300 XRCGB25M000F0G00R0 HCR2016 25.0000 100 50 (-40 to +85C) 5 150 6 300 XRCGB25M000F3G00R0 HCR2016 25.0000 30 50 (-40 to +85C) 5 150 6 300 XRCGB26M000F0G00R0 HCR2016 26.0000 100 50 (-40 to +85C) 5 150 6 300 XRCGB26M000F3G00R0 HCR2016 26.0000 30 50 (-40 to +85C) 5 150 6 300 XRCGB27M000F0G00R0 HCR2016 27.0000 100 50 (-40 to +85C) 5 150 6 300 XRCGB27M000F3G00R0 HCR2016 27.0000 30 50 (-40 to +85C) 5 150 6 300 XRCGB27M120F3G00R0 HCR2016 27.1200 30 50 (-40 to +85C) 5 150 6 300 XRCGB30M000F0G00R0 HCR2016 30.0000 100 50 (-40 to +85C) 5 100 6 300 XRCGB30M000F3G00R0 HCR2016 30.0000 30 50 (-40 to +85C) 5 100 6 300 XRCGB33M868F0G00R0 HCR2016 33.8688 100 50 (-40 to +85C) 5 100 6 300 XRCGB33M868F4G00R0 HCR2016 33.8688 45 50 (-40 to +85C) 5 100 6 300 XRCGB40M000F0G00R0 HCR2016 40.0000 100 50 (-40 to +85C) 5 100 6 300 XRCGB40M000F4G00R0 HCR2016 40.0000 45 50 (-40 to +85C) 5 100 6 300 XRCGB48M000F0G00R0 HCR2016 48.0000 100 50 (-40 to +85C) 5 100 6 300 XRCGB48M000F4G00R0 HCR2016 48.0000 45 50 (-40 to +85C) 5 100 6 300 * Equivalent Series Resistance 21 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Feb.5,2018 Standard Land Pattern Dimensions XRCHA_F_A (HCR2520) XRCGB_F_A/G (HCR2016) (Recommended Land Pattern) (Recommended Land Pattern) 0.4 0.75 0.70 2 2.2 0.30 0.70 0.75 0.60 1.35 (in mm) 22 (in mm) P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Notice -Crystal Units for Automotive- 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (C) Notice (Soldering and Mounting) Peak 260 245 220 2 Heating (220C min.) 180 150 Pre-heating (150 to 180C) Gradual Cooling Condition Pre-heating Heating Peak Temperature 150 to 180C 220C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245C min. 260C max. 5 sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Condition Pre-heating 150C 60 sec. Heating of the Soldering Iron 350C max. Watt 30W max. Shape of the Soldering Iron o3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 23 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice -Crystal Units for AutomotiveContinued from the preceding page. Notice (Storage and Operating Condition) 2 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Irregular or stopped oscillation may occur under unmatched circuit conditions. Please design your oscillation circuit to get 5 times or more of a negative resistance against the maximum value of the Equivalent Series Resistance, that is specified in order. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 24 (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. P79E.pdf Feb.5,2018 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for AutomotiveDimensions of Taping Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) Direction of Feed 1.750.1 3.50.1 (5.5) Direction of Feed (1.6 max.) 5 max. 1.000.1 1.850.1 0.250.1 Cover Film 10 10 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. 2 o1.00.1 4.00.1 (5) Cover Film o1.5+0.1 -0.0 8.00.2 2.00.1 (1.5 max.) 4.00.1 4.00.1 2.250.1 1.750.1 o1.00.1 2.250.1 0.250.05 (5.5) 3.50.1 o1.5+0.1 -0.0 8.00.2 2.00.1 0.850.1 4.00.1 XRCGB_F_A/G (HCR2016) 2.750.1 XRCHA_F_A (HCR2520) (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape o180mm Plastic Tape o330mm 3,000 9,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (o180 -1.5 ) 400 to 560 o13.00.2 2.00.5 9.0 +1.0 0 13.01.0 (in mm) 25 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Crystal Units Lead free RoHS for Industrial (1.8) (0.15) 1.30.1 (0.1) 0.50.1 (0.15) 1.30.1 (in mm) 2.00.1 0.450.05 0.650.1 (2) 0.70.2 (4) (3) 1.10.1 (in mm) 0.250.1 +0.05 5.0-0.2 +0.05 3.2-0.2 (3) 1.20.2 8-(0.1) (in mm) (5) (7) (2) 4- (4) (R0.2) (6) (3) 3- 0.15 109- 1.1 0.8 XRCLH (TAS-5032F) 10.0000-52.0000MHz o0.2 C0.3 Index (1) Pin Connection (1) (3): Crystal Terminal (2) (4) (5) (6) (7): Case GND 4(1.2)0.2 2- Pin Connection (1) (3): Crystal Terminal (2) (4): Case GND 2.6 10- 0.70.2 3- 0.90.1 (2) C0.4 (2) 0.950.1 0.550.05 (1) 0.90.1 1.00.1 (3) Marking 1.4 2.50.1 Marking 1.00.1 (in mm) (1.025) 0.40.1 1.450.1 XRCHH (TAS-2520F) 16.0000-52.0000MHz Pin Connection (1) (3): Crystal Terminal (2): No Connect (4): Case GND 0.60.1 (1) 0.60.1 (0.2) (0.2) (1.9) 2.00.1 0.70.1 Marking (4) 26 0.150.1 0.650.1 Marking Monthly Code (4) Marking Monthly Code 0.250.1 C0.3 (1) (1) Crystal Terminal (2) No Connect (3) Crystal Terminal (3) (0.3) (0.2) 3.20.1 XRCJH (TAS-3225J) 13.0000-52.0000MHz (2) 0.90.1 0.50.1 (1) XRCPB_F_Z (HCR2016) 24.0000-50.0000MHz (0.2) 0.250.1 (0.1) 0.850.1 0.40.1 (1.4) 1.60.1 (1.8) (0.1) (0.1) 2.00.1 2.50.1 (2.4) (0.1) (0.1) (in mm) 2.50.1 XRCHA_F_Z (HCR2520) 16.0000-20.0000MHz Marking Monthly Code (3) 0.450.05 1. Clock for PLC, Inverter, Servo Amp, Servo Motor, etc. controller ICs 2. Clock for LCD, Programmable display and Visual equipment controller ICs 3. Storage devices with SATA interface (Server, HDD, SSD, Optical storage device, etc.) 4. Clock for USB (Ultra-Speed and High-speed) controller ICs (Mobile phone, DVC, DSC, Portable audio, PC peripheral, etc.) 5. Other applications for replacement of other crystal units or oscillators (1) Crystal Terminal (2) No Connect (3) Crystal Terminal 0.250.1 Applications (0.2) (2) 0.90.1 (1) 0.50.1 3 (0.1) 0.50.1 XRCGB_F_Z (HCR2016) 16.0000-50.0000MHz (0.3) 0.250.1 (0.1) Features 1. The series is available in the applications to be necessary for high accuracy crystal units. 2. The crystal units are extremely small, contributing to a reduction in the mounting area. 3. The series complies to RoHS directive, being lead-free (phase 3). 0.650.05 1.60.1 These crystal units feature a small package and highly accurate frequency. Based on Murata's excellent package technology and high grade quartz crystal elements, achieving small size and high accuracy crystal units. (1.4) 2.00.1 (0.1) (in mm) P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Series Series XRCGB_F_Z XRCPB_F_Z Type HCR2016 Package Frequency (MHz) Resin 24.0000 to 50.0000 Frequency Tolerance (ppm max.) [at 25C3C] Frequency Shift by Temperature (ppm max.) [Standard Condition: +25C] Frequency Aging (ppm max./Year) Drive Level (W max.) Operating Temperature Range (C) 100 100 5 300 -40 to +105 10 15 1 (3/5Years) 60 -30 to +85 16.0000 to 50.0000 XRCHA_F_Z HCR2520 16.0000 to 20.0000 XRCHH TAS-2520F 16.0000 to 52.0000 XRCJH TAS-3225J Metal 13.0000 to 52.0000 XRCLH TAS-5032F 10.0000 to 52.0000 XRCPB series is a low profile type of XRCGB series. Part Number List <XRCGB_F_Z/XRCPB_F_Z> Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (max.) (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) Part Number Type XRCGB24M000F0Z00R0 HCR2016 24.0000 100 100 (-40 to +105C) 5 150 6 300 XRCGB24M576F0Z00R0 HCR2016 24.5760 100 100 (-40 to +100C) 5 150 6 300 XRCGB25M000F0Z00R0 HCR2016 25.0000 100 100 (-40 to +105C) 5 150 6 300 XRCGB26M000F0Z00R0 HCR2016 26.0000 100 100 (-40 to +105C) 5 150 6 300 XRCGB27M000F0Z00R0 HCR2016 27.0000 100 100 (-40 to +105C) 5 150 6 300 XRCGB27M120F0Z00R0 HCR2016 27.1200 100 100 (-40 to +105C) 5 150 6 300 XRCGB30M000F0Z00R0 HCR2016 30.0000 100 100 (-40 to +105C) 5 100 6 300 XRCGB31M250F0Z00R0 HCR2016 31.2500 100 100 (-40 to +105C) 5 100 6 300 XRCGB32M000F0Z00R0 HCR2016 32.0000 100 100 (-40 to +105C) 5 100 6 300 XRCGB33M868F0Z00R0 HCR2016 33.8688 100 100 (-40 to +100C) 5 100 6 300 XRCGB38M400F0Z00R0 HCR2016 38.4000 100 100 (-40 to +100C) 5 100 6 300 XRCGB40M000F0Z00R0 HCR2016 40.0000 100 100 (-40 to +100C) 5 100 6 300 XRCGB48M000F0Z00R0 HCR2016 48.0000 100 100 (-40 to +105C) 5 100 6 300 XRCPB24M000F0Z00R0 HCR2016 24.0000 100 100 (-40 to +105C) 5 150 6 300 XRCPB24M576F0Z00R0 HCR2016 24.5760 100 100 (-40 to +100C) 5 150 6 300 XRCPB25M000F0Z00R0 HCR2016 25.0000 100 100 (-40 to +105C) 5 150 6 300 XRCPB26M000F0Z00R0 HCR2016 26.0000 100 100 (-40 to +105C) 5 150 6 300 XRCPB27M000F0Z00R0 HCR2016 27.0000 100 100 (-40 to +105C) 5 150 6 300 XRCPB27M120F0Z00R0 HCR2016 27.1200 100 100 (-40 to +105C) 5 150 6 300 XRCPB30M000F0Z00R0 HCR2016 30.0000 100 100 (-40 to +105C) 5 100 6 300 XRCPB31M250F0Z00R0 HCR2016 31.2500 100 100 (-40 to +105C) 5 100 6 300 XRCPB32M000F0Z00R0 HCR2016 32.0000 100 100 (-40 to +105C) 5 100 6 300 XRCPB33M868F0Z00R0 HCR2016 33.8688 100 100 (-40 to +100C) 5 100 6 300 XRCPB40M000F0Z00R0 HCR2016 40.0000 100 100 (-40 to +100C) 5 100 6 300 XRCPB48M000F0Z00R0 HCR2016 48.0000 100 100 (-40 to +105C) 5 100 6 300 3 * Equivalent Series Resistance <XRCHA_F_Z> Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (max.) (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) Part Number Type XRCHA16M000F0Z01R0 HCR2520 16.0000 100 100 (-40 to +105C) 5 100 8 300 XRCHA20M000F0Z01R0 HCR2520 20.0000 100 100 (-40 to +105C) 5 80 8 300 * Equivalent Series Resistance <XRCHH> Part Number Type Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (max.) XRCHH16M000F1QB7P0 TAS-2520F 16.0000 10 15 (-30 to +85C) 1 (3/5Years) 80 8 60 XRCHH20M000F1QB1P0 TAS-2520F 20.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 * Equivalent Series Resistance Continued on the following page. 27 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Continued from the preceding page. Part Number Type Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (max.) XRCHH26M000F1QD8P0 TAS-2520F 26.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCHH36M000F1QA3P0 TAS-2520F 36.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCHH40M000F1QB3P0 TAS-2520F 40.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCHH52M000F1QA2P0 TAS-2520F 52.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 * Equivalent Series Resistance <XRCJH> Part Number 3 Type Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (max.) (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) XRCJH13M000F1QA0P0 TAS-3225J 13.0000 10 15 (-30 to +85C) 1 (3/5Years) 80 8 60 XRCJH16M000F1QB5P0 TAS-3225J 16.0000 10 15 (-30 to +85C) 1 (3/5Years) 80 8 60 XRCJH20M000F1QB3P0 TAS-3225J 20.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCJH26M000F1QC1P0 TAS-3225J 26.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCJH36M000F1QA1P0 TAS-3225J 36.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCJH40M000F1QB2P0 TAS-3225J 40.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCJH52M000F1QA1P0 TAS-3225J 52.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 * Equivalent Series Resistance <XRCLH> Part Number Load Drive Frequency Shift Frequency ESR* Frequency Frequency Tolerance Capacitance Level (ppm max.) by Temperature (ppm max.) Aging (max.) (MHz) (pF) (W max.) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) XRCLH10M000F1QA4P0 TAS-5032F 10.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCLH12M000F1QA0P0 TAS-5032F 12.0000 10 15 (-30 to +85C) 1 (3/5Years) 60 8 60 XRCLH14M745F1QA0P0 TAS-5032F 14.7456 10 15 (-30 to +85C) 1 (3/5Years) 40 8 60 XRCLH16M000F1QA2P0 TAS-5032F 16.0000 10 15 (-30 to +85C) 1 (3/5Years) 40 8 60 XRCLH21M250F1QA0P0 TAS-5032F 21.2500 10 15 (-30 to +85C) 1 (3/5Years) 40 8 60 XRCLH52M000F1QA1P0 TAS-5032F 52.0000 10 15 (-30 to +85C) 1 (3/5Years) 40 8 60 * Equivalent Series Resistance 28 Type P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Standard Land Pattern Dimensions XRCGB_F_Z, XRCPB_F_Z (HCR2016) XRCHA_F_Z (HCR2520) (Recommended Land Pattern) (Recommended Land Pattern) 0.4 0.75 0.70 2.2 0.30 0.70 0.75 0.60 1.35 (in mm) (in mm) XRCHH (TAS-2520F) 3 XRCJH (TAS-3225J) 2.2 1.15 0.95 1.4 1.6 1.8 1.0 1.4 (in mm) (in mm) XRCLH (TAS-5032F) 2.4 1.2 1.5 3.9 Avoid putting signal lines under the product except referenced land pattern. (in mm) 29 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Notice -Crystal Units for Industrial- 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm Temperature (C) Notice (Soldering and Mounting) Peak 260 245 220 Heating (220C min.) 180 150 Pre-heating (150 to 180C) Gradual Cooling Condition 3 Pre-heating Heating Peak Temperature 150 to 180C 220C min. 60 to 120 sec. 30 to 60 sec. 60 to 120 sec. 30 to 60 sec. 245C min. 260C max. 5 sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Please keep solder away from the metal cap (Lid) portion. Condition Pre-heating 150C 60 sec. Heating of the Soldering Iron 350C max. Watt 30W max. Shape of the Soldering Iron o3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, the damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 30 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Feb.5,2018 Notice -Crystal Units for IndustrialContinued from the preceding page. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in solderability due to the storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable. Please be sure to consult with our sales representative or engineer prior to using the products. 3 Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Please confirm circuit the conditions on your set, because irregular or stop oscillation may occur under unmatched circuit conditions. 2. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 3. Please do not use these products in the following applications in transportation equipment: vehicles, trains, ships, etc. (example: engine control, brake control, steering control, body control.) 31 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for IndustrialDimensions of Taping 3 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Direction of Feed Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) 5 max. Direction of Feed 0.600.1 10 0.250.1 4.00.1 Cover Film 1.850.1 (1.2 max.) o1.00.1 (1.6 max.) 1.000.1 10 0.250.1 5 max. Cover Film 1.750.1 3.50.1 o1.00.1 1.850.1 4.00.1 o1.5+0.1 -0.0 8.00.2 2.00.1 2.250.1 4.00.1 (5.5) (5.5) 3.50.1 1.750.1 o1.5+0.1 -0.0 2.00.1 8.00.2 4.00.1 XRCPB_F_Z (HCR2016) 2.250.1 XRCGB_F_Z (HCR2016) (in mm) 1.750.1 4.00.1 (1.5 max.) o1.00.1 2.250.1 0.250.05 (5.5) 3.50.1 o1.5+0.1 -0.0 8.00.2 2.00.1 0.850.1 4.00.1 2.750.1 XRCHA_F_Z (HCR2520) (5) Cover Film 10 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. (in mm) Direction of Feed Minimum Quantity/Dimensions of Reel Plastic Tape o180mm Plastic Tape o330mm 3,000 9,000 (pcs.) Trailer 160 to 190 Empty Leader Cover Film Components Empty 160 min. 0 (o180 -1.5 ) 400 to 560 o13.00.2 2.00.5 9.0 +1.0 0 13.01.0 (in mm) 32 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for IndustrialDimensions of Taping XRCJH (TAS-3225J) Drawing Out Direction Drawing Out Direction o1.20 A 2 3 (3.0) A' B 2.3 (3.0) A-A' Section 1 4 2 3 2.9 Material: Black Conductive PS Note 1) Radius "R" not mentioned is 0.3 max. 2) The tolerance not mentioned is 0.1. 1.25 +0.07 -0.05 5 max. (in mm) 1.75 4.0 3.50.05 4 4.0 o1.5+0.1 -0.0 0.30.05 B-B' Section 1 3.50.05 B' 10 pitches cumulative 40.00.1 2.00.05 0.8 2.7 4.0 1.75 4.0 o1.5+0.1 -0.0 8.00.2 2.00.05 0.250.05 8.00.2 10 pitches cumulative 40.00.2 3.6 XRCHH (TAS-2520F) 5 max. o1.0+0.1 -0.0 Note 1) Radius "R" not mentioned is 0.3 max. 2) The tolerance not mentioned is 0.1. 3) The #1 pin is shown by the black dot. The black dot is not printed on the top of crystal unit. Refer to the drawing for contents of marking, (in mm) (Frequency, lot number). 3 Minimum Quantity/Dimensions of Reel Plastic Tape o180mm 3,000 (pcs.) Trailer 500 min. 3 J Empty +1.0 o60 -0 3 J Leader Cover Film Components 3-2.00.5 Empty 150 min. 250 min. o130.2 J Mark for placing label 120 +3 9.0 -0 11.41 o180 (in mm) 33 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Units for IndustrialDimensions of Taping XRCLH (TAS-5032F) Drawing Out Direction 10 pitches cumulative 40.00.1 4 2 3 5 max. 3 1.75 5 max. o1.5+0.1 -0.0 3.7 1.4 0.30.05 5.5 1 4.0 5.50.05 8.0 o1.5+0.1 -0.0 12.00.3 2.00.05 Note 1) Radius "R" not mentioned is 0.3 max. 2) The tolerance not mentioned is 0.1. (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape o255mm 3,000 (pcs.) Trailer 500 min. 2.0 Leader Cover Film R1.5 Empty 20 Components 2.00.5 2.0 3-R1 R4.5 18.4 max. 34 250 min. 3-120 R12.5 13.51.0 Empty 150 min. 60.5 130.3 800.5 2.0 60 2551 (in mm) P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Crystal Oscillators Feb.5,2018 RoHS Lead free for Industrial (6) (4) (2) (3) 2.00.2 We offer a varied lineup of TCXO (Temperature compensated crystal oscillator)/VC-TCXO (Voltage-controlled temperature compensated crystal oscillator) based on highly reliable crystal units, superior temperature compensation and adjusting method fostered by our long experience and expertise. 2.50.2 (5) 0.90.1 (1) 1. Excellent frequency stability over temperature 2. Low profile 3. Low supply voltage 4. SMD type (Reflow soldering available) 5. The series complies to RoHS directive, being lead-free (phase 3). 1.2 Features (3) Pin Connection (1): NC or GND/VC (2): NC (3): GND (4): OUT (5): NC (6): VCC Marking (in mm) (2) 0.75 XNCHH (TTS27NSC-A7) 10.0000-52.0000MHz XTCHH (TTS27VSC-A7) 10.0000-52.0000MHz 1.84 (1) (5) (6) (4) 0.6 1.55 2.3 3.20.2 (3) (1) 1.0 max. (2) 2.50.2 (4) Applications 0.26 1. Business radios 2. GPS (GNSS) systems 3. Small cells 4. Wireless devices 4 3.05 1.95 (2) C0.2 0.65 2.35 (1) (4) Pin Connection (1): GND or NC/Vc (2): GND (3): Output (4): Vcc Marking (in mm) (3) (8) 5.00.2 (7) (6) (5) (1) (2) (4) 3.20.2 XNCJH (TTS18NSH-A7) 10.0000-52.0000MHz XTCJH (TTS18VSH-A7) 10.0000-52.0000MHz (3) 1.5 max. 2.6 XTCLH_J (TTS14VSH/TTS14VCH) 10.0000-50.0000MHz 1.4 0.8 (1) (2) C0.5 (8) 1.1 (3) (4) 1.2 0.4 (7) (6) (5) Pin Connection (1): Vc (2): NC (3): NC (4): GND (5): Clipped Sine Output (6): NC (7): NC (8): Vcc Marking (in mm) Series Series Type XNCHH TTS27NSC-A7 XTCHH TTS27VSC-A7 XNCJH TTS18NSH-A7 XTCJH TTS18VSH-A7 XTCLH_J TTS14VSH TTS14VCH Size Package Frequency (MHz) Frequency Tolerance Frequency Shift Frequency (ppm max.) by Temperature (ppm max.) Aging [at 25C3C] [Standard Condition: +25C] (ppm max./Year) Operating Temperature Range (C) -- 2520 3225 5032 VC Function 10.0000 to 52.0000 1.0 0.5 1.0 -30 to +85C 10.0000 to 50.0000 0.5 0.2 0.28 0.5 -40 to +85C Metal -- 35 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Part Number List <XNCHH> Part Number Type Frequency Shift Frequency Current Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) Aging Consumption (MHz) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (mA max.) Frequency Controlled Range (ppm) XNCHH10M000TJEA2P0 TTS27NSC-A7 10.0000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH15M300TJEA0P0 TTS27NSC-A7 15.3000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH16M368TJEA4P0 TTS27NSC-A7 16.3680 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH16M800TJEA3P0 TTS27NSC-A7 16.8000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH19M200TJEC1P0 TTS27NSC-A7 19.2000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH26M000TJEE5P0 TTS27NSC-A7 26.0000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH28M800TJEA1P0 TTS27NSC-A7 28.8000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH32M000TJEB5P0 TTS27NSC-A7 32.0000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH38M400TJEB3P0 TTS27NSC-A7 38.4000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCHH52M000TJEA1P0 TTS27NSC-A7 52.0000 1.0 0.5 (-30 to +85C) 1.0 2 - <XTCHH> Part Number 4 Type Frequency Shift Frequency Current Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) Aging Consumption (MHz) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (mA max.) Frequency Controlled Range (ppm) XTCHH10M000TJEA3P0 TTS27VSC-A7 10.0000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH15M300TJEA2P0 TTS27VSC-A7 15.3000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH16M800TJEA2P0 TTS27VSC-A7 16.8000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH19M200TJEB4P0 TTS27VSC-A7 19.2000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH20M950TJEA0P0 TTS27VSC-A7 20.9500 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH21M250TJEA0P0 TTS27VSC-A7 21.2500 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH26M000TJEB1P0 TTS27VSC-A7 26.0000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH28M800TJEA0P0 TTS27VSC-A7 28.8000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH38M400TJEA1P0 TTS27VSC-A7 38.4000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCHH52M000TJEA1P0 TTS27VSC-A7 52.0000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. <XNCJH> Part Number Type Frequency Shift Frequency Current Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) Aging Consumption (MHz) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (mA max.) Frequency Controlled Range (ppm) XNCJH10M000TJEA8P0 TTS18NSH-A7 10.0000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH15M300TJEA0P0 TTS18NSH-A7 15.3000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH16M800TJEA1P0 TTS18NSH-A7 16.8000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH19M200TJEA5P0 TTS18NSH-A7 19.2000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH26M000TJEB4P0 TTS18NSH-A7 26.0000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH28M800TJEA1P0 TTS18NSH-A7 28.8000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH38M400TJEA3P0 TTS18NSH-A7 38.4000 1.0 0.5 (-30 to +85C) 1.0 2 - XNCJH52M000TJEA0P0 TTS18NSH-A7 52.0000 1.0 0.5 (-30 to +85C) 1.0 2 - <XTCJH> Part Number 36 Type Frequency Shift Frequency Current Frequency Frequency Tolerance (ppm max.) by Temperature (ppm max.) Aging Consumption (MHz) [at 25C3C] [Standard Condition: +25C] (ppm max./Year) (mA max.) Frequency Controlled Range (ppm) XTCJH10M000TJEB0P0 TTS18VSH-A7 10.0000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH15M300TJEA3P0 TTS18VSH-A7 15.3000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH16M800TJEB0P0 TTS18VSH-A7 16.8000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH19M200TJEB6P0 TTS18VSH-A7 19.2000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH26M000TJEB4P0 TTS18VSH-A7 26.0000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH28M800TJEA0P0 TTS18VSH-A7 28.8000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH38M400TJEA3P0 TTS18VSH-A7 38.4000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. XTCJH52M000TJEA5P0 TTS18VSH-A7 52.0000 1.0 0.5 (-30 to +85C) 1.0 2 5 min. to 15 max. P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 <XTCLH_J> Part Number Type Frequency (MHz) Frequency Tolerance (ppm max.) Frequency Shift Frequency by Temperature (ppm max.) Aging [Standard Condition: +25C] (ppm max./Year) Frequency Controlled Range (ppm) Output XTCLH19M200TJJC3P0 TTS14VSH 19.2000 0.5ppm max. (253C) 0.2(-40 to +85C) 0.5 3min. to 6max. Clipped Sine Wave XTCLH25M000TJJA5P0 TTS14VSH 25.0000 0.5ppm max. (253C) 0.2(-40 to +85C) 0.5 3min. to 6max. Clipped Sine Wave XTCLH26M000TJJA6P0 TTS14VSH 26.0000 0.5ppm max. (253C) 0.2(-40 to +85C) 0.5 XTCLH20M000CYJB6P0 TTS14VCH 20.0000 1.12ppm max. (252C) 0.28(-40 to +85C) 0.8 4.12min. to 9max. CMOS XTCLH40M000CYJC4P0 TTS14VCH 40.0000 1.12ppm max. (252C) 0.28(-40 to +85C) 0.8 4.12min. to 9max. CMOS XTCLH10M000CHJA1P0 TTS14VCH 10.0000 0.5ppm max. (253C) 0.28(-40 to +85C) 0.5 3min. to 6max. CMOS XTCLH20M000CHJA0P0 TTS14VCH 20.0000 0.5ppm max. (253C) 0.28(-40 to +85C) 0.5 3min. to 6max. CMOS XTCLH40M000CHJA0P0 TTS14VCH 40.0000 0.5ppm max. (253C) 0.28(-40 to +85C) 0.5 3min. to 6max. CMOS XTCLH50M000CHJA3P0 TTS14VCH 50.0000 0.5ppm max. (253C) 0.28(-40 to +85C) 0.5 3min. to 6max. CMOS 3min. to 6max. Clipped Sine Wave Standard Land Pattern Dimensions XNCHH (TTS27NSC-A7) XTCHH (TTS27VSC-A7) XNCJH (TTS18NSH-A7) XTCJH (TTS18VSH-A7) 3.6 4 0.4 2.9 1.1 2.04 0.55 1.6 0.7 1.35 2.7 (in mm) (in mm) XTCLH_J (TTS14VSH/TTS14VCH) 5.6 3.8 1.2 2.4 C0.5 (in mm) 37 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Notice -Crystal Oscillators for IndustrialNotice (Soldering and Mounting) 260 255 220 Temperature (C) 1.1. Soldering Condition (1) Reflow Please mount components on a circuit board by the reflow soldering. Flux: Please use rosin based flux; but do not use water soluble flux. Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the following condition. Standard thickness of soldering paste: 0.10 to 0.15mm 175C25C 175 Time (sec.) Condition Pre-heating Heating Peak Temperature 4 120 sec. max. 150 to 200C 220C min. 55 sec. max. 255C min. 260C max. 10 sec. max. 120sec. max. 10sec. max. 55sec. max. (2) Soldering Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or metal lid may be damaged if excessive thermal stress is applied. Condition Pre-heating 150C 60 sec. Heating of the Soldering Iron 350C max. Watt 30W max. Shape of the Soldering Iron o3mm max. Soldering Time 5 sec. max. Solder Sn-3.0Ag-0.5Cu 1.2. Optimum Solder Amount for Soldering Please keep the solder volume below the height of the substrate. When exceeding the substrate, damage of sealing part between the metal cap and the substrate may occur. 2. Wash The component cannot withstand washing. 3. Notice for Mounting The component is recommended with placement machines employing optical placement capabilities. The component might be damaged by mechanical force depending on placement machine and condition. Make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines employing mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 38 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P79E.pdf Feb.5,2018 Notice -Crystal Oscillators for IndustrialContinued from the preceding page. Notice (Storage and Operating Condition) 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable. And avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40 degrees C Humidity: 15 to 85% R.H. 2. Expire Date on Storage Expiration date (shelf life) of the products is 6 months after delivery under the conditions of an unopened package. Please use the products within 6 months after delivery. If you store the products for a long time (more than 6 months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in the places under direct sunlight, heat and vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking the crystal element. 4. Other Conformal coating or washing of the component is not acceptable. Please be sure to consult with our sales representative or engineer whenever and prior to using the products. 4 Notice (Rating) The component may be damaged if excess mechanical stress is applied. Notice (Handling) 1. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 2. Please do not use these products in the following applications in transportation equipment (vehicles, trains, ships, etc.). (example: engine control, brake control, steering control, body control.) 39 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Oscillators for IndustrialDimensions of Taping XNCHH (TTS27NSC-A7) XTCHH (TTS27VSC-A7) XNCJH (TTS18NSH-A7) XTCJH (TTS18VSH-A7) 5 max. o1.20.1 2.30.1 5 max. R0.3 max. 4.00.1 o1.5+0.1 -0.0 4.00.1 3.50.05 1.40.1 0.250.05 3.50.1 2.00.05 1.40.1 0.30.05 8.00.3 3.50.05 4.00.1 2.70.1 4.00.1 8.00.2 2.00.05 o1.5+0.1 -0.0 1.750.1 Drawing Out Direction 1.750.1 Drawing Out Direction R0.3 max. o1.10.1 Material: Black Conductive PS Note 1) Cumulative tolerance of 10 pitches of the sprocket hole is 40.00.2mm. (in mm) 3 max. 2.80.1 3 max. R0.3 max. Material: Black Conductive PS Note 1) Cumulative tolerance of 10 pitches of the sprocket hole is 0.2mm. (in mm) Minimum Quantity/Dimensions of Reel 4 Plastic Tape o180mm 3,000 (pcs.) Trailer 200 min. Empty 300 min. Leader Cover Film Components Empty 300 min. 200 min. 2.00.5 +1 60 -0 130.2 9.00.3 11.41.0 40 210.8 1800.3 (in mm) P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Packaging -Crystal Oscillators for IndustrialDimensions of Taping XTCLH_J (TTS14VSH/TTS14VCH) 5.50.05 4.00.1 1.70.1 0.30.05 o1.5+0.1 -0.0 5.50.1 8.00.1 12.00.3 2.00.05 o1.5+0.1 -0.0 1.750.1 Drawing Out Direction 5 max. 3.70.1 5 max. R0.3 max. R0.3 max. Material: Black Conductive PS Note 1) Cumulative tolerance of 10 pitches of the sprocket hole is 40.00.2mm. (in mm) Minimum Quantity/Dimensions of Reel Plastic Tape o255mm 4 2,000 (pcs.) Trailer 500 min. o1001.0 Empty 2.00.5 Leader Cover Film Components Empty 150 min. 250 min. o210.8 o130.2 Reel Label 13.51.0 17.51.0 o2542.0 (in mm) 41 P79E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Feb.5,2018 Measuring Circuit of Crystal Units Measuring Circuit 1. Frequency Measuring Method The load resonance frequency (Lower frequency of the two given when the electrical impedance of the component becomes resistant near its resonance point) is measured by network analyzer (KEYSIGHT E5100A or the equivalent) and the circuit in Figure 1. DUT is shown in Figure 2, and the value of Cs refers to the load capacitance value in specifications. 2. Equivalent Series Resistance The equivalent series resistance (ESR) is measured by network analyzer (KEYSIGHT E5100A or equivalent) and the circuit in Figure 1. DUT is shown in Figure 3. 3. Measuring Condition Standard conditions for measurement shall be +253C temperature and humidity of 45 to 85%R.H. Network Analyzer OUT1 OUT2 R 66.2 A 66.2 DUT 159 14.2 14.2 159 Figure 1 Frequency Measuring Circuit Cs Figure 2 DUT (Device Under Test) C1 L1 ESR Co Figure 3 DUT (Device Under Test) 42 P79E.pdf Feb.5,2018 Cat. No. P79E-10 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of January 2018. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: XTL1009 XRCGB24M000F0L00R0 XRCGB25M000F0L00R0 XRCGB25M000F3M00R0 XRCGB27M000F0L00R0 XRCGB27M000F3M00R0 XRCGB27M120F3M00R0 XRCGB30M000F0L00R0 XRCGB30M000F3M00R0 XRCGB33M868F0L00R0 XRCGB40M000F0L00R0 XRCGB40M000F4M00R0 XRCGB27M120F3M10R0 XRCGB26M000F0L00R0 XRCGB26M000F3M00R0 XRCGB24M000F3N00R0 XRCGB24M000FAN00R0 XRCGB25M000F3N00R0 XRCGB25M000FAN00R0 XRCGB26M000F3N00R0 XRCGB26M000FAN00R0 XRCGB27M000F3N00R0 XRCGB27M000FAN00R0 XRCGB30M000F3N00R0 XRCGB30M000FAN00R0 XRCGB32M000F2P00R0 XRCGB26M000F2P00R0 XRCGB27M000F2P00R0 XRCGB24M000F2P00R0 XRCGB25M000F2P00R0 XRCGB27M120F2P00R0 XRCGB30M000F2P00R0 XRCGB31M250F2P00R0 XRCGB24M000F0G00R0 XRCGB32M000FAN00R0 XRCGB30M000F0G00R0 XRCGB27M000F3G00R0 XRCGB26M000F3G00R0 XRCGB33M868F4M00R0 XRCGB27M000F0G00R0 XRCGB25M000F0G00R0 XRCGB24M576F0G00R0 XRCGB25M000F3G00R0 XRCGB33M868F4G00R0 XRCGB33M868F0G00R0 XRCGB24M000F3G00R0 XRCGB30M000F3G00R0 XRCGB24M576F3G00R0 XRCGB26M000F0G00R0 XRCGB32M000F3N00R0 XRCGB48M000F4M12R0 XRCGB32M000F2P26R0 XRCGB32M000FAP11R0 XRCGB32M000F2N13R0 XRCGB27M120F2P10R0 XRCGB25M000F3M04R0 XRCGB24M000F1H02R0 XRCGB25M000F1H01R0 XRCGB25M000F1H02R0 XRCGB25M000F1H03R0 XRCGB24M000F1H01R0 XRCGB24M000F1H03R0