SRPT659,5/4,4BLACK - HARTMANN CODIER GMBH

Switches And Data

Input Units.

Quality And A Wide

Range.

Custom Components

According To Your

Requirements.

Version 3

www.hartmann-codier.de

Our series is laid out for pro-

fessional technology with

modern assembly processes.

They have solid PCB terminals

outline the contact fingers are

goldplated and the contact

paths have an abrasion-resis-

tant gold overlay.

The contact resistance is low

and stable.

These types are available with

10-or 16-positions in BCD, BCD

complement, hexadecimal and

hexadecimal complement.

On request our PT65 can be

delivered in 4, 6 and 8 posi-

tion types as well.

P36 and P60A are available

also in SMT.

Note

All dimensions are given in

mm. Mounting hole patterns

and layouts are drawn from

component side.

The tolerance range, in most

cases, is in accordance with

”DIN 7168 medium“.

We reserve the right to under-

take modifications in the inte-

rest of technical progress. The

catalogue represents the latest

level of technology on the day

it was published.

Besides the ”3+3” pin configu-

ration with two common con-

nections Hartmann offer the

P60A in a ”4+1” pin configu-

ration.

This system has on one side

common connection and on

the opposite side 4 outgoing

connections.

For all series different actua-

tors are available. Therefore

solutions for most applications

can be met. Figures are clearly

visible and detention mecha-

nism is precise.

The switches of our PRINT-

HART series are quality pro-

ducts.

Hartmann is approved to ISO

9001. All switches are subject

to electronic final check.

Hartmann PCB code switches

can be found in all electronic

fields.

Not every demand can be ful-

filled with standard switches.

More and more special execu-

tions are required. We are

ready and – due to our exper-

tise, and the vertically integra-

ted manufacture – we are in

the position to respond to

your wishes. Please contact us

also, if you don’t find the opti-

mum switch for your require-

ments.

We will find a solution.

PCB Code Switches PRINTHART

Standard Types

Series/ types P36 P36S P60A P60AS PT65 PT65 .31 P

Dimensions W/D/H 7,4/7,4/3,65 7,4/7,4/3,85 10/10/6,0 10/10/6,2 10/10/6,75 10/10/6,75 10/10/8,8

Catalogue page 8 8 10 10 12 14 15

Standard actuation

Arrow-shaped slot CCCCCCC

Rectangular-shaped slot C

Spindle CCCC

*CC

Segment wheel CC

*CC

Cross-shaped slot CCCC

Slotted spindle CC

Connection type

3+3 CC CCC

4+1 CC

Terminals

Straight C C CCC

Crimped C C CCC

Angular L2,54 C CCC

Angular L5,08 C CCC

SMT CC

Standard-Codes

BCD CCCCC C

BCD Complement CCCCC C

Hexadecimal CCCCC C

Hexadecimal Compl. CCCCC C

Pulse generator C

* only to be fitted after the soldering process

Bestellangaben

P36101L254

Series Standard actuators Codes Terminals

1 = arrow-shaped slot 01 = BCD V = crimped

2 = rectangular-shaped slot 02 = BCD Compl. L254 = left angular

3 = spindle 03 = Hexadecimal 2,54mm

5 = segment wheel 06 = Hexa. Compl. L508 = left angular

7 = cross-shaped slot 31 = Pulse genera- 5,08mm

8 = slotted spindle tor

Order description

P36, P36S

P60A, P60AS

PT65

Types P36.../P36S...

Extra Sealed Design

with High Temperature

Resistance.Adapted for

Reflow soldering.

Angular

SMT-Pins

on Request!

Mechanical Data

Permiss. ambient temp. –30°C – +90°C

Torque min. 0,7Ncm

Expected life min. 104steps

Positions per rotation 10, 16

Electrical Data

Operating voltage ≤24V

Contact load, static ≤0,4A

Contact load, dynamic ≤0,10A

Test voltage 250V 50Hz/1min

Contact resistance < 100 mOhm

Insulation resistance > 100 MOhm

Solder recommendations

(EN 61760-1; DIN IEC 60068-2-20)

Solder reflow max. 40s/215°C

Solder iron max. 2s/340°C

Solder bath max. 10s/260°C

Standard actuators

See page 18

Colour of rotor

BCD red

BCD Complement orange

Hexadecimal grey

Hexadecimal Complement white

Order description see page 9.

Height: 3,65mm (SMT: 3,85mm)

Pin connection: 3 + 3

All standard codes

Available with spindle or slotted

spindle

Straight, crimped, angular and

SMT pins

Dimensions/Mounting hole

patterns P36

Dimensions/Mounting hole

patterns P36S

straight

crimped

left

angular

* excess dimension to prevent movement during processing

Tape and Reel Packing Series P36S...

Typen P60A.../P60AS...

Extra Sealed Design

with High Temperature

Resistance.Adapted for

Reflow soldering.

Angular

SMT-Pins

on Request!

Height: 6,0mm (SMT: 6,2mm)

Pin connection: 4 + 1

All standard codes

Individual operating elements

Straight, crimped, angular and

SMT pins

Mechanical Data

Permiss. ambient temp. –20°C – +85°C

Torque min. 0,7Ncm

Expected life min. 104steps

Positions per rotation 10, 16

Electrical Data

Operating voltage ≤24V

Contact load, static ≤0,4A

Contact load, dynamic ≤0,15A

Test voltage 250V 50Hz/1min

Contact resistance < 100mOhm

Insulation resistance > 100MOhm

Solder recommendations

(EN 61760-1; DIN IEC 60068-2-20)

Solder reflow max. 40s/215°C

Solder iron max. 2s/340°C

Solder bath max. 10s/260°C

Standard actuators

See page 18

Individual operating elements

See page 15

Order description see page 9.

Dimensions/Mounting hole

patterns P60A

straight crimped

angular

* excess dimension to prevent movement during processing

Dimensions/Mounting hole

patterns P60AS

Tape and Reel Packing Series P60AS...

Type PT65...

New!

Stopped Switches

on Request.

Height: 6,5mm

Pin connection: 3 + 3

Screwdriver and cross-shaped

slot types

All standard codes

Straight, crimped and angular

pins

Available with spindle or seg-

ment wheel

Extra sealed Design

Mechanical Data

Permiss. ambient temp. –20°C – +70°C

Torque min. 0,7Ncm

Expected life min. 104steps

Positions per rotation 10, 16

Electrical Data

Operating voltage ≤24V

Contact load, static ≤0,4A

Contact load, dynamic ≤0,15A

Test voltage 250V 50Hz/1min

Contact resistance < 80 mOhm

Insulation resistance > 100 MOhm

Solder recommendations

(DIN IEC 60068-2-20)

Solder iron max. 2s/340°C

Solder bath max. 10s/260°C

Standard actuators

See page 18

Order description see page 9.

Dimensions/Mounting hole

patterns

straight

crimped

left

angular

2,54mm

left

angular

5,08mm

* excess dimension to prevent movement during processing

Both types PT65 and P60A are

available with cross-shaped slots

and can be fitted either by the

factory or afterwards with the

actuators. Elements are available

individually under the following

order description. The required

colour must be added to the

text.

Operating elements for cross-shaped

slot-types

Segment wheel *

Order description

SR-PT65 9,5/4,4

Colours: yellow, red, green, blue, grey or black

Wheel (only PT65)

Order description

DR-PT65 17

Colour: white (number printing on request)

Spindle *

Order description

SA-PT65 4/x (x = 7,3; 11,6; 13,3)

Colours: grey, red, black

Knob *

Order description

DK-PT65 10,5/5,3

DK-PT65 10,5/x (x = 15,7; 29,1; 34,4)

Colour: red

* In case of P60 AS to be fitted after soldering.

Type PT65.31

The pulse generator is a mechanical rotary

switch connecting input C to outputs 1 and 2

after another in a retarded manner. In the

mechanical detent position input C is galvani-

cally separated from the outputs 1 and 2.

Depending on the rotational direction of the

axis, the switching sequence is

rotation to right (clockwise) C+1, C+1+2, C+2

rotation to left

(counterclockwise)

C+2, C+2+1, C+1

Hereby, the rotational direction is recognized

electrically. Typical applications are to be found

wherever adding or substracting instructions

are read into digital electronics (dimmer, volu-

me control).

Wiring diagramme

Mechanical detent position

Mechanical Data

Permiss. ambient temp. –20°C – +70°C

Torque min. 0,7Ncm

Expected life min. 104steps

Positions per rotation 10

Electrical Data

Operating voltage ≤24V

Contact load, static ≤0,4A

Contact load, dynamic ≤0,15A

Test voltage 250V 50Hz/1min

Contact resistance < 80 mOhm

Insulation resistance > 100 MOhm

Contact bounce < 10ms*

Pulse duration

C + Pin 1 > 50ms*

C + Pin 1 + Pin 2 > 100ms*

C + Pin 2 > 50ms*

* Data valid at 15 rpm

Solder recommendations

(DIN IEC 60068-2-20)

Solder iron max. 2s/340°C

Solder bath max. 10s/260°C

Order description see page 9.

Dimensions/Mounting hole

patterns

straight

crimped

left

angular

2,54mm

left

angular

5,08mm

* excess dimension to prevent movement during processing

Type P...

Mechanical Data

Permiss. ambient temp. –20°C – +70°C

Torque min. 0,7Ncm

Expected life min. 104steps

Positions per rotation 10, 16

Electrical Data

Operating voltage ≤24V

Contact load, static ≤0,4A

Contact load, dynamic ≤0,15A

Test voltage 250V 50Hz/1min

Contact resistance < 80 mOhm

Insulation resistance > 100 MOhm

Solder recommendations

(DIN IEC 60068-2-20)

Solder iron max. 2s/340°C

Solder bath max. 5s/260°C

Knob

Order description

DK-P 10,5/ x (x = 3,3; 6,9; 12,9); colour: red

Standard actuators

See page 18

Order description see page 9.

Height: 8,6mm

Pin connection: 3 + 3

All standard codes

Available with spindle or rectan-

gular shaped slot

Straight, crimped and angular

pins

Dimensions/Mounting hole

patterns

straight

crimped

left

angular

2,54mm

left

angular

5,08mm

* excess dimension to prevent movement during processing

Standard actuators

Arrow- Rectangular- Spindle Segment Cross- Slotted

shaped slot shaped slot wheel shaped slot spindle

Order-No. 1 Order-No. 2 Order-No. 3 Order-No. 5 Order-No. 7 Order-No. 8

Opera-

tion

Series/

Types

P36

P36S

Colour:

according

to code

PT65

Colour:

grey

P60A

P60AS

Colour: red

Colour:

grey

Codes

On Request

* = mounting hole pattern (component side)

Type

Standard

Position Description

BCD

Type

BCD

Type

BCD Complement Type

Hexadecimal Type

Hexadecimal

Compl.

Type

Decimal Type

BCD Type

BCD Complement Type

Special Code

with 2 C

Type

BCD

Type

Hexadecimal Compl.

1 x “C“.

Type

Off/On

Type

BCD

Type

Gray Code

Type 24

Type 25

Hartmann Codier

GmbH & Co. KG

Industriestraße 3

D-91083 Baiersdorf

Tel.: +49 91 33/77 93-0

Fax: +49 91 33/42 35

+49 91 33/77 93 36 (Sales)

www.hartmann-codier.de

e-mail: info@hartmann-codier.de

999938 02/2002

Satz, Litho & Druck: Bresler KG, Erlangen