SEMICONDUCTOR TECHNICAL DATA The MC10E/100E166 is a 9-bit magnitude comparator which compares the binary value of two 9-bit words and indicates whether one word is greater than, or equal to, the other. * 1100ps Max. A=B * Extended 100E VEE Range of - 4.2V to - 5.46V * 75k Input Pulldown Resistors 9-BIT MAGNITUDE COMPARATOR Pinout: 28-Lead PLCC (Top View) A2 B1 A1 B0 A0 VCCO 25 24 23 22 21 20 19 A3 26 18 A=B B3 27 17 NC NC 28 16 VCC VEE 1 15 B>A A4 2 14 VCCO B4 3 13 A>B A5 4 12 NC 5 6 7 8 9 10 11 B5 A6 B6 A7 B7 A8 B8 FN SUFFIX PLASTIC PACKAGE CASE 776-02 LOGIC DIAGRAM A0 - A8 9 * All VCC and VCCO pins are tied together on the die. B0 - B8 PIN NAMES Pin A0 - A8 B0 - B8 A>B B>A A=B Function A Data Inputs B Data Inputs A Greater than B Output B Greater than A Output A Equal to B Output (active-LOW) 7/96 Motorola, Inc. 1996 2-1 REV 3 9 COMPARATOR B2 A>B A=B B>A MC10E166 MC100E166 DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = VCCO = GND) 0C Symbol Characteristic IIH Input HIGH Current IEE Power Supply Current 10E 100E min typ 25C max min typ 150 85C max min typ 150 max Unit 150 A Condition mA 113 113 156 156 113 113 156 156 113 130 156 156 AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = VCCO = GND) 0C Symbol Characteristic 25C 85C min typ max min typ max min typ max tPLH tPHL Propagation Delay to Output D to A = B D to A < B, A > B 500 500 750 850 1100 1400 500 500 750 850 1100 1400 500 500 750 850 1100 1400 tr tf Rise/Fall Time 20 - 80% 300 450 800 300 450 800 300 450 800 MOTOROLA Unit Condition ps ps 2-2 ECLinPS and ECLinPS Lite DL140 -- Rev 4 MC10E166 MC100E166 OUTLINE DIMENSIONS FN SUFFIX PLASTIC PLCC PACKAGE CASE 776-02 ISSUE D 0.007 (0.180) B Y BRK -N- T L -M M U 0.007 (0.180) X G1 M S N T L -M S S N S D Z -L- -M- D W 28 V 1 C A 0.007 (0.180) M R 0.007 (0.180) M T L -M S T L -M S N S N S H S N S 0.007 (0.180) M T L -M N S S 0.004 (0.100) G J -T- K SEATING PLANE F VIEW S G1 T L -M S N 0.007 (0.180) M T L -M S N S VIEW S S NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIM G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIM R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). ECLinPS and ECLinPS Lite DL140 -- Rev 4 T L -M K1 E S S VIEW D-D Z 0.010 (0.250) 0.010 (0.250) 2-3 DIM A B C E F G H J K R U V W X Y Z G1 K1 INCHES MIN MAX 0.485 0.495 0.485 0.495 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 -- 0.025 -- 0.450 0.456 0.450 0.456 0.042 0.048 0.042 0.048 0.042 0.056 -- 0.020 2 10 0.410 0.430 0.040 -- MILLIMETERS MIN MAX 12.32 12.57 12.32 12.57 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 -- 0.64 -- 11.43 11.58 11.43 11.58 1.07 1.21 1.07 1.21 1.07 1.42 -- 0.50 2 10 10.42 10.92 1.02 -- MOTOROLA MC10E166 MC100E166 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 MOTOROLA 2-4 *MC10E/D* MC10E166/D ECLinPS and ECLinPS Lite DL140 -- Rev 4