SEMICONDUCTOR TECHNICAL DATA
2–1 REV 3
Motorola, Inc. 1996
7/96
The MC10E/100E166 is a 9-bit magnitude comparator which
compares the binary value of two 9-bit words and indicates whether one
word is greater than, or equal to, the other.
•1100ps Max. A=B
•Extended 100E VEE Range of – 4.2V to – 5.46V
•75kΩ Input Pulldown Resistors
PIN NAMES
Pin Function
A0– A8A Data Inputs
B0– B8B Data Inputs
A > B A Greater than B Output
B > A B Greater than A Output
A = B A Equal to B Output
(active-LOW)
9-BIT MAGNITUDE
COMPARATOR
FN SUFFIX
PLASTIC PACKAGE
CASE 776-02
LOGIC DIAGRAM
A3
B3
NC
VEE
A4
B4
A5
26
27
28
2
3
4
25 24 23 22 21 20 19 18
17
16
15
14
13
12
115 6 7 8 9 10
B2A2B1A1B0A0VCCO
A=B
NC
VCC
B>A
VCCO
A>B
NC
B5A6B6A7B7A8B8
A0– A8
B0– B8
9
9
COMPARATOR
A > B
B > A
A = B
1
Pinout: 28-Lead PLCC (Top View)
* All VCC and VCCO pins are tied together on the die.
MC10E166 MC100E166
MOTOROLA ECLinPS and ECLinPS Lite
DL140 — Rev 4
2–2
DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = VCCO = GND)
0°C 25°C 85°C
Symbol Characteristic min typ max min typ max min typ max Unit Condition
IIH Input HIGH Current 150 150 150 µA
IEE Power Supply Current mA
10E 113 156 113 156 113 156
100E 113 156 113 156 130 156
AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = VCCO = GND)
0°C 25°C 85°C
Symbol Characteristic min typ max min typ max min typ max Unit Condition
tPLH Propagation Delay to Output ps
tPHL D to A = B 500 750 1100 500 750 1100 500 750 1100
D to A < B, A > B 500 850 1400 500 850 1400 500 850 1400
trRise/Fall Time ps
tf20 - 80% 300 450 800 300 450 800 300 450 800
MC10E166 MC100E166
2–3 MOTOROLAECLinPS and ECLinPS Lite
DL140 — Rev 4
OUTLINE DIMENSIONS
FN SUFFIX
PLASTIC PLCC PACKAGE
CASE 776–02
ISSUE D
0.007 (0.180) T L –M SNSM
0.007 (0.180) T L –M SNSM
0.007 (0.180) T L –M SNSM
0.010 (0.250) T L –M SNSS
0.007 (0.180) T L –M SNSM
0.010 (0.250) T L –M SNSS
0.007 (0.180) T L –M SNSM
0.007 (0.180) T L –M SNSM
0.004 (0.100)
SEATING
PLANE
-T-
12.32
12.32
4.20
2.29
0.33
0.66
0.51
0.64
11.43
11.43
1.07
1.07
1.07
—
2
°
10.42
1.02
12.57
12.57
4.57
2.79
0.48
0.81
—
—
11.58
11.58
1.21
1.21
1.42
0.50
10
°
10.92
—
1.27 BSC
A
B
C
E
F
G
H
J
K
R
U
V
W
X
Y
Z
G1
K1
MIN MINMAX MAX
INCHES MILLIMETERS
DIM
NOTES:
1. DATUMS -L-, -M-, AND -N- DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS
PLASTIC BODY AT MOLD PARTING LINE.
2. DIM G1, TRUE POSITION TO BE MEASURED
AT DATUM -T-, SEATING PLANE.
3. DIM R AND U DO NOT INCLUDE MOLD FLASH.
ALLOWABLE MOLD FLASH IS 0.010 (0.250)
PER SIDE.
4. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN
THE PACKAGE BOTTOM BY UP TO 0.012
(0.300). DIMENSIONS R AND U ARE
DETERMINED AT THE OUTERMOST
EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR
BURRS, GATE BURRS AND INTERLEAD
FLASH, BUT INCLUDING ANY MISMATCH
BETWEEN THE TOP AND BOTTOM OF THE
PLASTIC BODY.
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037
(0.940). THE DAMBAR INTRUSION(S) SHALL
NOT CAUSE THE H DIMENSION TO BE
SMALLER THAN 0.025 (0.635).
VIEW S
B
U
Z
G1
X
VIEW D-D
H
K
F
VIEW S
G
C
Z
A
R
E
J
0.485
0.485
0.165
0.090
0.013
0.026
0.020
0.025
0.450
0.450
0.042
0.042
0.042
—
2
°
0.410
0.040
0.495
0.495
0.180
0.110
0.019
0.032
—
—
0.456
0.456
0.048
0.048
0.056
0.020
10
°
0.430
—
0.050 BSC
-N- Y BRK
D
D
W
-M-
-L-
28 1 V
G1
K1
MC10E166 MC100E166
MOTOROLA ECLinPS and ECLinPS Lite
DL140 — Rev 4
2–4
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
MFAX: RMFAX0@email.sps.mot.com – T OUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MC10E166/D
*MC10E/D*
◊
