Interlace / Progressive Conversion IC S2S65P10 First Step Guide Rev.1.0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All other product names mentioned herein are trademarks and/or registered trademarks of their respective companies. (c)SEIKO EPSON CORPORATION 2007, All rights reserved. Table of Contents 1. OVERVIEW ..................................................................................................................1 2. CONTENTS OF SAMPLE SOFTWARE ......................................................................1 3. OPERATION DESCRIPTION.......................................................................................1 4. SAMPLE OPERATION ................................................................................................2 4.1 When Using the S1S65010 and S2S65P10 Evaluation Boards ..............................................2 4.2 When Using the S2S65A00 and S2S65P10 Evaluation Boards .............................................4 REVISION HISTORY .......................................................................................................6 S2S65P10 First Step Guide (Rev.1.0) EPSON i 1. OVERVIEW 1. OVERVIEW This document explains the operation procedures of the S1S65010 and S2S65A00 evaluation boards that contain the sample software for S2S65P10. 2. CONTENTS OF SAMPLE SOFTWARE There are three types of operation modes. 1 Fixed screen output mode Enables you to output the input from channel 1 and operate three types of I/P conversion modes. 2 Automatic switching screen output mode Enables 2-input switching (channels 1 and 2) or 4-input switching (channels 1 to 4) in the 30- or 150-frame output cycle. I/P conversion is available in the Weave mode. 3 4-input composite screen output mode Sets each channel to the QVGA size to combine four screens and changes to the VGA size to output data. 3. OPERATION DESCRIPTION 1 When combining the S2S65P10 and S1S65010 evaluation boards: Display images from the S2S65010 evaluation board on your PC via network. 2 When combining the S2S65P10 and S2S65A00 evaluation boards: Save data on the memory card of the S2S65A00 evaluation board. Remove the card from the board once and insert it in your PC; otherwise, after getting images, connect a USB to your PC to view images. S2S65P10 evaluation board Camera Module NTSC/PAL VIDEO DECODER Camera Module NTSC/PAL VIDEO DECODER S2S65P10 Camera Module NTSC/PAL VIDEO DECODER Camera Module NTSC/PAL VIDEO DECODER S2S65P10 First Step Guide (Rev.1.0) EPSON S1S65P10/S2S65A00 Evaluation board S1S65010 or S2S65A00 1 4. SAMPLE OPERATION 4. SAMPLE OPERATION 4.1 When Using the S1S65010 and S2S65P10 Evaluation Boards 1 Connect two boards and also connect cameras. Camera Module Camera Module Camera Module Camera Module S5U2S65P00H0100 LAN S2S65P10 Evalution Board le Cab S5U1S65K01H0x00 S1S65010 Evaluation Board AC/DC Adaptor Number of connectable camera boards Max. 4 boards LAN cable 1 unit AC-DC power adapter 1 unit (Attached to the S1S65010 evaluation board.) 2 Configure network settings on your PC. Install Java software. http://www.java.com/ja/ Enter the following network set values on your PC. IP address: 192.168.1.XXX (With XXX=2 to 254 excluding 253) Sub net mask: 255.255.255.0 Default gateway: 192.168.1.1 2 EPSON S2S65P10 First Step Guide (Rev.1.0) 4. SAMPLE OPERATION 3 Set the switches on the S2S65P10 evaluation board. 4 5 6 7 SW1 "OFF" SW2 "OFF" SW3 "OFF" SW4 "OFF" SW5[4:1] "ON", "OFF", "ON", "OFF" SW6 "65K" Set the switches on the S1S65010 evaluation board SW1[6:1] "OFF", "OFF", "OFF", "OFF" , "ON", "ON" SW2 "OFF" SW4 "OFF" SW5 "1" SW6[8:1] "OFF", "OFF", "OFF", "OFF", "OFF", "OFF", "OFF", "OFF" SW7 "OFF" SW8 "1" SW9 "ON" SW10[8:1] "OFF", "OFF", "OFF", "OFF", "OFF", "OFF", "OFF", "OFF" Set by operation mode. Supply the power to cameras. Supply the power to the S1S65010 evaluation board. [For uITRON] CN3 and PC's COM port jointed. 9600bps, 8 bit data, No Parity bit, Stop bit 1, No flow control The joint camera is modified to S2S65P10.See "S2S65P10 DRIVER EMBEDED MANUAL" Chapter 4.2. Activate the browser on your PC. Type "http://192.168.1.253" in the address field of the browser, and press the [Enter] key. The S1S65010 evaluation board will display the menu. Click [High-Speed Movie Display] Another window is opened, and a camera image will appear. [For Linux] Start our Viewer software. For operations, see the Viewer manual attached to the evaluation board. * Changing the operation mode 1 Determine the operation mode depending on the SW10[8:6] setting of the S1S65010 evaluation board. SW10[8,7,6] Operation mode ON,ON,OFF ON,OFF,ON OF,OFF,ON OFF,ON,ON OFF,ON,OFF OFF,OFF,ON OFF,OFF,OFF Fixed screen output Fixed screen output Fixed screen output Automatic switching screen output Automatic switching screen output 4-input composite screen output 4-input composite screen output I/P conversion mode Weave Bob Interpolation Weave Weave None None Input channel 1 1 1 1, 2 *30-frame switching 1, 2, 3, 4 *30-frame switching 1, 2 *A channel with no input is blank. 1,2,3,4 2 Press SW3 on the S1S65010 evaluation board, and reset the evaluation board. 3 [For uITRON] PC browser [For Linux] Restart the Viewer software. S2S65P10 First Step Guide (Rev.1.0) EPSON 3 4. SAMPLE OPERATION 4.2 When Using the S2S65A00 and S2S65P10 Evaluation Boards 1 Connect two boards and also connect cameras. Camera Module Camera Module Camera Module Camera Module S5U2S65P00H0100 B US S2S65P10 Evaluation Board Cab le S5U2S65A00H0x00 S2S65A00 Evaluation Board CF Card AC/DC Adaptor Connect the S2S65P10 evaluation board to the CAMERA1 connector of the S2S65A00 evaluation board. Number of connectable camera boards Max. 4 boards CF Card 1 unit The camera item of "config.txt" inside the CF Card is modified to S2S65P10. See "S2S65A00 Demo Aplication MANUAL" Chapter 12.4. USB cable 1 unit AC-DC power adapter 1 unit (Attached to the S2S65A00 evaluation board.) 2 Set the switches on the S2S65P10 evaluation board. SW1 "OFF" SW2 "OFF" SW3 "OFF" SW4 "OFF" SW5[4:1] "ON", "OFF", "ON", "OFF" SW6 "65K" 3 Set the switches on the S2S65A00 evaluation board. Dip Switch SW2[8:1] "OFF", "OFF", "OFF", "OFF", "OFF", "OFF", "OFF", "OFF" SW3 "ON" SW9[6:1] "OFF", "ON", "OFF", "ON", "OFF", "ON" SW11 "OFF" SW12 "ON" 4 EPSON S2S65P10 First Step Guide (Rev.1.0) 4. SAMPLE OPERATION Rotary Switch: Rotary switch: It shows the switch direction as seen when CN6 and CN7 on the S2S65A00 evaluation board are at the top. SW1 2 1 SW5 1 2 SW6 2 1 SW7 2 1 4 Supply the power to cameras. 5 Supply the power to the S2S65A00 evaluation board. 6 Press the SW8 trigger switch on the S2S65A00 evaluation board to read images. Connecting your PC to the board via a USB cable will cause the CF card to be recognized as a removable disk, so you can confirm files in the CF card. Remove the CF card from the evaluation board and connect it to your PC; you will be able to check the files. * Changing the operation mode 1 Determine the operation mode depending on the SW2[5:8] setting on the S2S65A00 evaluation board. SW[5,6] ON,OFF OFF,ON ON,ON SW[7,8] OFF,OFF ON,OFF OFF,ON ON,ON OFF,OFF ON,OFF OFF,ON ON,ON OFF,OFF ON,OFF OFF,ON ON,ON Operation mode Fixed screen output Automatic switching screen output 4-input composite screen output I/P conversion mode Weave Bob Interpolation Reserved Weave None Input channel 1 1 1 1, 2 *30-frame switching 1, 2 *150-frame switching 1, 2, 3, 4 *30-frame switching 1, 2, 3, 4 *150-frame switching 1 *A channel with no input is blank. 1,2 *A channel with no input is blank. 1, 2, 3 *A channel with no input is blank. 1,2,3,4 2 Press SW13 on the S2S65A00 evaluation board, and reset the evaluation board. S2S65P10 First Step Guide (Rev.1.0) EPSON 5 REVISION HISTORY REVISION HISTORY Rev. 0.00 0.80 1.00 6 Date 2007/04/23 2007/06/26 2007/08/01 Description First Edition Change "Demo Manual" to "First Step Guide". Release Edition EPSON Person C.Higuchi T.Suzuki T.Suzuki S2S65P10 First Step Guide (Rev.1.0) International Sales Operations AMERICA ASIA EPSON ELECTRONICS AMERICA, INC. HEADQUARTERS EPSON (CHINA) CO., LTD. 2580 Orchard Parkway San Jose , CA 95131,USA Phone: +1-800-228-3964 FAX: +1-408-922-0238 SALES OFFICES Northeast 301 Edgewater Place, Suite 210 Wakefield, MA 01880, U.S.A. Phone: +1-800-922-7667 FAX: +1-781-246-5443 EUROPE EPSON EUROPE ELECTRONICS GmbH HEADQUARTERS Riesstrasse 15 80992 Munich, GERMANY Phone: +49-89-14005-0 FAX: +49-89-14005-110 23F, Beijing Silver Tower 2# North RD DongSanHuan ChaoYang District, Beijing, CHINA Phone: +86-10-6410-6655 FAX: +86-10-6410-7320 SHANGHAI BRANCH 7F, High-Tech Bldg., 900, Yishan Road, Shanghai 200233, CHINA Phone: +86-21-5423-5522 FAX: +86-21-5423-5512 EPSON HONG KONG LTD. 20/F., Harbour Centre, 25 Harbour Road Wanchai, Hong Kong Phone: +852-2585-4600 FAX: +852-2827-4346 Telex: 65542 EPSCO HX EPSON Electronic Technology Development (Shenzhen) LTD. 12/F, Dawning Mansion, Keji South 12th Road, Hi- Tech Park, Shenzhen Phone: +86-755-2699-3828 FAX: +86-755-2699-3838 EPSON TAIWAN TECHNOLOGY & TRADING LTD. 14F, No. 7, Song Ren Road, Taipei 110 Phone: +886-2-8786-6688 FAX: +886-2-8786-6660 EPSON SINGAPORE PTE., LTD. 1 HarbourFront Place, #03-02 HarbourFront Tower One, Singapore 098633 Phone: +65-6586-5500 FAX: +65-6271-3182 SEIKO EPSON CORPORATION KOREA OFFICE 50F, KLI 63 Bldg., 60 Yoido-dong Youngdeungpo-Ku, Seoul, 150-763, KOREA Phone: +82-2-784-6027 FAX: +82-2-767-3677 GUMI OFFICE 2F, Grand B/D, 457-4 Songjeong-dong, Gumi-City, KOREA Phone: +82-54-454-6027 FAX: +82-54-454-6093 SEIKO EPSON CORPORATION SEMICONDUCTOR OPERATIONS DIVISION IC Sales Dept. IC International Sales Group 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-42-587-5814 FAX: +81-42-587-5117 Document Code: 411178400 First Issue July 2007 H Printed in JAPAN Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Epson: S5U2S65P00H0100