Document 159-1 ChipInductors - 0805HSSeries (2012) Ceramic body and wire wound construction provide highest SRFs available in 0805 size. 2 These ultra-compact inductors provide exceptional Q values, even at high frequencies. 5 6 7 DCR max Irms max Color (Ohms) (mA) code 0.08 600 Black 0.11 600 Brown 0.12 600 Red 0.15 600 Orange 0.17 600 Yellow Part number1 0805HS-030T _ B _ 0805HS-060T _ B _ 0805HS-080T _ B _ 0805HS-120T _ B _ 0805HS-150T _ B _ Inductance (nH) 3.3 @ 250 MHz 6.8 @ 250 MHz 8.2 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz Percent 3 tolerance 20,10,5 20,10,5 20,10,5 20,10,5 20,10,5 Q min 50 @ 1500 MHz 50 @ 1000 MHz 50 @ 1000 MHz 50 @ 500 MHz 50 @ 500 MHz SRF min (MHz) 7900 5500 4700 4000 3400 0805HS-180T _ B _ 0805HS-220T _ B _ 0805HS-270T _ B _ 0805HS-330T _ B _ 0805HS-390T _ B _ 18 @ 250 MHz 22 @ 250 MHz 27 @ 250 MHz 33 @ 250 MHz 39 @ 250 MHz 20,10,5 20,10,5,2 20,10,5,2 20,10,5,2 20,10,5,2 50 @ 500 MHz 55 @ 500 MHz 55 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 3300 2600 2500 2050 2000 0.20 0.22 0.25 0.27 0.29 600 500 500 500 500 Green Blue Violet Gray White 0805HS-470T _ B _ 0805HS-560T _ B _ 0805HS-680T _ B _ 0805HS-820T _ B _ 0805HS-101T _ B _ 47 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 82 @ 150 MHz 100 @ 150 MHz 20,10,5,2 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2,1 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 65 @ 500 MHz 65 @ 500 MHz 1650 1550 1450 1300 1200 0.31 0.34 0.38 0.42 0.46 500 500 500 400 400 Black Brown Red Orange Yellow 0805HS-121T _ B _ 0805HS-151T _ B _ 0805HS-181T _ B _ 0805HS-221T _ B _ 120 @ 150 MHz 150 @ 100 MHz 180 @ 100 MHz 220 @ 100 MHz 10,5,2,1 10,5,2,1 10,5,2,1 10,5,2 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 1100 920 870 850 0.51 0.56 0.64 0.70 400 400 400 400 Green Blue Violet Gray 4 1. Specify tolerance, termination, and packaging codes: 0805HS-221TGBC F = 1% G = 2% J = 5% K = 10% M = 20% (Table shows stock tolerances in bold.) Termination: B = Ag/Pd/Pt/Pb L = Lead free Ag/Pd/Pt Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 per full reel). B = Less than full reel. On tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 per full reel). Tolerance: 2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. For recommended test procedures, contact Coilcraft. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using Agilent/HP 4291A with Agilent/HP 16193 test fixture and on Agilent/HP 8753D with Coilcraft SMD-D test fixture. 5. SRF measured using Agilent/HP 8720D network analyzer and Coilcraft SMD-D test fixture. 6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 7. Average current for a 15C rise above 25C ambient. 8. Operating temperature range -40C to +125C. 9. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. Specifications subject to change without notice. Document 159-1 Revised 11/20/02 Document 159-2 0805HS Series (2012) S-Parameter files Typical Q vs Frequency ON OUR WEB SITE OR CD ON OUR WEB SITE OR CD SPICE models 100 12 nH 90 39 nH 22 nH 6.8 nH 3.3 nH 80 68 nH 70 120 nH Q Factor 60 50 40 30 20 10 0 10 100 1,000 10,000 Frequency (MHz) Typical L vs Frequency 1,000 Inductance (nH) 220 nH A max B max C max E F G H I J 0.085 0.060 0.057 0.050 0.020 0.040 0.070 0.040 0.030 2,16 1,52 1,45 1,27 0,51 1,02 1,78 1,02 0,76 Parts/reel: 7 2,000; 13 7,500 Tape width: 8 mm For packaging data see Tape and Reel Specifications section. 100 nH 100 39 nH 15 nH 10 3.3 nH 1 10 100 1,000 Frequency (MHz) Specifications subject to change without notice. Document 159-2 Revised 11/20/02