Ceramic body and wire wound construction provide
highest SRFs available in 0805 size.
These ultra-compact inductors provide exceptional Q
values, even at high frequencies.
Chip Inductors –0805HS Series (2012)
Inductance2Percent SRF min5DCR max6Irms max7Color
Part number1(nH) tolerance3Q min4(MHz) (Ohms) (mA) code
0805HS-030T_B_ 3.3 @ 250 MHz 20,10,550 @ 1500 MHz 7900 0.08 600 Black
0805HS-060T_B_ 6.8 @ 250 MHz 20,10,550 @ 1000 MHz 5500 0.11 600 Brown
0805HS-080T_B_ 8.2 @ 250 MHz 20,10,550 @ 1000 MHz 4700 0.12 600 Red
0805HS-120T_B_ 12 @ 250 MHz 20,10,550 @ 500 MHz 4000 0.15 600 Orange
0805HS-150T_B_ 15 @ 250 MHz 20,10,550 @ 500 MHz 3400 0.17 600 Yellow
0805HS-180T_B_ 18 @ 250 MHz 20,10,550 @ 500 MHz 3300 0.20 600 Green
0805HS-220T_B_ 22 @ 250 MHz 20,10,5,2 55 @ 500 MHz 2600 0.22 500 Blue
0805HS-270T_B_ 27 @ 250 MHz 20,10,5,2 55 @ 500 MHz 2500 0.25 500 Violet
0805HS-330T_B_ 33 @ 250 MHz 20,10,5,2 60 @ 500 MHz 2050 0.27 500 Gray
0805HS-390T_B_ 39 @ 250 MHz 20,10,5,2 60 @ 500 MHz 2000 0.29 500 White
0805HS-470T_B_ 47 @ 200 MHz 20,10,5,2 60 @ 500 MHz 1650 0.31 500 Black
0805HS-560T_B_ 56 @ 200 MHz 10,5,2,1 60 @ 500 MHz 1550 0.34 500 Brown
0805HS-680T_B_ 68 @ 200 MHz 10,5,2,1 60 @ 500 MHz 1450 0.38 500 Red
0805HS-820T_B_ 82 @ 150 MHz 10,5,2,1 65 @ 500 MHz 1300 0.42 400 Orange
0805HS-101T_B_ 100 @ 150 MHz 10,5,2,1 65 @ 500 MHz 1200 0.46 400 Yellow
0805HS-121T_B_ 120 @ 150 MHz 10,5,2,1 50 @ 250 MHz 1100 0.51 400 Green
0805HS-151T_B_ 150 @ 100 MHz 10,5,2,1 50 @ 250 MHz 920 0.56 400 Blue
0805HS-181T_B_ 180 @ 100 MHz 10,5,2,1 50 @ 250 MHz 870 0.64 400 Violet
0805HS-221T_B_ 220 @ 100 MHz 10,5,2 50 @ 250 MHz 850 0.70 400 Gray
Document 159-1
Specifications subject to change without notice. Document 159-1 Revised 11/20/02
1. Specify tolerance,termination, and packaging codes:
0805HS-221TGBC
Tolerance: F =1% G=2% J=5% K= 10% M= 20%
(Table shows stock tolerances in bold.)
Termination: B = Ag/Pd/Pt/Pb L= Lead free Ag/Pd/Pt
Packaging: C =7″machine-ready reel. EIA-481 embossed plastic tape
(2000 per full reel).
B= Less than full reel. On tape, but not machine-ready. To have a
leader and trailer added ($25 charge), use code letter C instead.
D=13″machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (7500 per full reel).
2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP 4286A
impedance analyzer with Coilcraft-provided correlation pieces. For
recommended test procedures, contact Coilcraft.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using Agilent/HP 4291A with Agilent/HP 16193 test fixture and
on Agilent/HP 8753D with Coilcraft SMD-D test fixture.
5. SRF measured using Agilent/HP 8720D network analyzer and Coilcraft
SMD-D test fixture.
6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft
CCF858 test fixture.
7. Average current for a 15°C rise above 25°C ambient.
8. Operating temperature range −40°C to +125°C.
9. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
0805HS Series (2012)
Typical Q vs Frequency
12 nH
6.8 nH
3.3 nH
22 nH
39 nH
68 nH
120 nH
100
90
80
70
60
50
40
30
20
10
0
10 100 Frequency (MHz)
Q Factor
1,000 10,000
Typical L vs Frequency
1,000
100
10
10 100
Frequency (MHz)
Inductance (nH)
1,00
0
1
220 nH
100 nH
39 nH
15 nH
3.3 nH
A max B max C max E F G H I J
0.085 0.060 0.057 0.050 0.020 0.040 0.070 0.040 0.030
2,16 1,52 1,45 1,27 0,51 1,02 1,78 1,02 0,76
Parts/reel: 7″2,000; 13″7,500 Tape width: 8 mm
For packaging data see Tape and Reel Specifications section.
Document 159-2
Specifications subject to change without notice. Document 159-2 Revised 11/20/02
S-Parameter files
SPICE models
ON OUR WEB SITE OR CD
ON OUR WEB SITE OR CD
