A 17.10 1.18 1.40 11.20 C1 C2 C3 3x 4.40 1.85 0.05 1.18 1.36 6x 1.60 0.1 Max. 0.76 19.30 Pitch 2.54 6x 4.75 24.650.25 18.30 Specification : 7.62 F E A 0.85 Section A-A 3x 8.45 C5 C6 C7 6x 2.00 2.54 15.200.15 15.52 Recommended PCB Layout General Tolerance 0.05 5.08 as viewed from component side 12.26 Solder Area 21.75 24.650.25 C Keep Out Area Component Outline Ordering Grid C2----->RST SIM5051 C3----->CLK C6----->Vpp 2 A By Revision Date CC Tolerances (Except as Noted) SIM5051 F PCN F2 14/11/16 X. 1 X.X 0.25 X.XX 0.15 X.X 0.5 X.XXX 0.050 X.XX 0.25 Length Angle 6 Units: Metric (mm) Request Samples and Quotation (700 per Reel) Locating Post 00 = Without SIM Card Connector Hinged Type, 6 Pin, SMT, 1.85mm Profile 5 00 Packing Options A = Tape & Reel Product Description 4th October 2009 4 18 SIM5051 Drawing Date 3 0 Part Number Detail 1 6 No. of Contacts 6 Card Detection Switch 0 = Without C5----->GND 17.10 Mechanical : Durability : 5,000 cycles 5,000 C1----->VCC C7----->I/O A Electrical : Voltage Rating : 50VAC (R.M.S.) Max. Current Rating : 1A AC/DC Operating Temperature : -40C to +85C Contact Resistance : 50 m typ., 100 m max. Insulating Resistance : 1000 M Min. (Apply 500VDC) Dielectric Withstanding Voltage : Withstand 500 V AC for 1 minute 500 V AC 1 5.08 D B Material : Plastic Housing : Hi-Temp Thermoplastic UL94V-0, E106764 (E130i), Black, Contact Terminal : Phosphor Bronze Metallic Shell & Hinge : Stainless Steel - SUS304 Plating : Contact Terminal plating : Under-plating : 50" Nickel 50" Contact Area : 3" Gold 3" Soldering Area : Gold Flash 24.65 G 2.54 0.85 H C 3rd Angle Projection 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE GC Global Connector Technology www.gct.co Not to Scale Drawn By SA 8 Sheet No. 1/3 H 1 2 Slide metal lid from 'LOCK' position to 'OPEN' position Open metal lid to allow SIM card to be inserted G F E 3 4 Place SIM card against contacts, chip face down Close metal lid and slide back to 'LOCK' position D C B Part Number Product Description SIM5051 SIM Card Connector Hinged Type, 6 Pin, SMT, 1.85mm Profile Drawing Date A 4th October 2009 By Detail 1 2 3 4 Revision Date 5 CC SIM5051 F PCN F2 14/11/16 Tolerances (Except as Noted) Length Angle Units: Metric (mm) C 3rd Angle Projection 6 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE GC Global Connector Technology www.gct.co Not to Scale Drawn By SA 8 Sheet No. 2/3 DIA.:33 cm N.W.:0.32KGS G.W.:1.10KGS Q'TY :700 PCS H End Start Empty Cavities 160mm min G Empty Cavities 400mm min product in cavities Reel Cover tape 50mm min Label 44 +2 -0 Reel O 2 +0.05 -0.00 10 Pull Out Direction F O2 1 E N.W: 5.04KG G.W: 9.57KG Q'ty: 5600Pcs per carton (8 reels, 700 pieces per reel) 2.000.10 O 50 1. 0 .1 0 1.Each cavity will hold 1pc. Placement methods are shown in the diagrams.1pc 2.After the packing machine filled the reel,tangle the reel one more loop with protection tape, stick adhesive tape on the four quardrants of the reel, to aviod out-spreading. Stick 1pc. of label on each reel.,,reel, reel,reel1PC 3. Method of Packing is Hot-Melting. 32.000.10 4. The peel-off force between the cover tape & carry tape is: 0.1N-0.7N (variation within 0.3N). Peel-off angle:165-175 degree; Speed of peel-off: 250mm-300mm/min. cover tape carry tape:0.1N-0.7N (0.3N):165-175; : 250mm-300mm/ B 2.250.10 24.900.10 A Part Number Product Description SIM5051 SIM Card Connector Hinged Type, 6 Pin, SMT, 1.85mm Profile Drawing Date 4th October 2009 By Detail 1 Carton Notes: T=0.300.10 32.000.20 C 4.000.10 m 0m 35 L= e tsid Ou L= 35 Ou 0m tsi m de 18.000.10 14.200.20 1.750.10 DETAIL A 5:1 D H=325mm Reel A Outside 22 o80 Label 3 O1 o3300.05 9.7 11 2 2 3 4 Revision Date 5 CC SIM5051 F PCN F2 14/11/16 Tolerances (Except as Noted) Length Angle Units: Metric (mm) C 3rd Angle Projection 6 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE GC Global Connector Technology www.gct.co Not to Scale Drawn By SA 8 Sheet No. 3/3