January 9, 2014 S25FL132K_164K_00_04 S25FL132K and S25FL164K 59
Data Sheet (Preliminary)
Notes:
1. Dual Output data
IO0 = (D6, D4, D2, D0)
IO1 = (D7, D5, D3, D1)
2. Dual Input Address
IO0 = A22, A20, A18, A16, A14, A12, A10, A8 A6, A4, A2, A0, M6, M4, M2, M0
IO1 = A23, A21, A19, A17, A15, A13, A11, A9 A7, A5, A3, A1, M7, M5, M3, M1
3. Quad Output Data
IO0 = (D4, D0, …..)
IO1 = (D5, D1, …..)
IO2 = (D6, D2, …..)
IO3 = (D7, D3, …..)
4. Quad Input Address
IO0 = A20, A16, A12, A8, A4, A0, M4, M0
IO1 = A21, A17, A13, A9, A5, A1, M5, M1
IO2 = A22, A18, A14, A10, A6, A2, M6, M2
IO3 = A23, A19, A15, A11, A7, A3, M7, M3
5. Fast Read Quad I/O Data
IO0 = (x, x, x, x, D4, D0, …..)
IO1 = (x, x, x, x, D5, D1, …..)
IO2 = (x, x, x, x, D6, D2, …..)
IO3 = (x, x, x, x, D7, D3, …..)
6. This command is recommended when using the Dual or Quad “Continuous Read Mode” feature. See Section 9.3.8 and Section 9.3.8
on page 73 for more information.
Notes:
1. The Device ID will repeat continuously until CS# terminates the command.
2. See Section 7.5.1, Legacy Device Identification Commands on page 55 for Device ID information. The 90h instruction is followed by an
address. Address = 0 selects Manufacturer ID as the first returned data as shown in the table. Address = 1 selects Device ID as the first
returned data followed by Manufacturer ID.
Table 9.2 Command Set (Read Commands)
Command Name BYTE 1
(Instruction) BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTE 6
Read Data 03h A23–A16 A15–A8 A7–A0 (D7–D0, …)
Fast Read 0Bh A23–A16 A15–A8 A7–A0 dummy (D7–D0, …)
Fast Read Dual Output 3Bh A23–A16 A15–A8 A7–A0 dummy (D7–D0, …) (1)
Fast Read Quad Output 6Bh A23–A16 A15–A8 A7–A0 dummy (D7–D0, …) (3)
Fast Read Dual I/O BBh A23–A8 (2) A7–A0, M7–M0
(2) (D7–D0, …) (1)
Fast Read Quad I/O EBh A23–A0,
M7–M0 (4)
(x,x,x,x,
D7–D0, …) (5) (D7–D0, …) (3)
Continuous Read Mode Reset
(6) FFh FFh
Table 9.3 Command Set (ID, Security Commands)
Command Name BYTE 1
(Instruction) BYTE 2 BYTE 3 BYTE 4 BYTE 5 BYTE 6
Deep Power-down B9h
Release Power down / Device ID ABh dummy dummy dummy Device ID (1)
Manufacturer / Device ID (2) 90h dummy dummy 00h Manufacturer Device ID
JEDEC ID 9Fh Manufacturer Memory Type Capacity
Read SFDP Register /
Read Unique ID Number 5Ah 00h 00h A7–A0 dummy (D7–D0, …)
Read Security Registers (3) 48h A23–A16 A15–A8 A7–A0 dummy (D7–D0, …)
Erase Security Registers (3) 44h A23–A16 A15–A8 A7–A0
Program Security Registers (3) 42h A23–A16 A15–A8 A7–A0 D7–D0, …