1713000000 - Weidmuller - Datasheet.Directory

Product catalogue | Terminals | Tension clamp technology | Mini modular terminals | Clip-in fixing

- 1 -

General ordering data

Order No. 1713000000

Part designation ZDUB 2.5-2/4AN/RC GE

Version Feed-through terminal, 2.5 mm², Tension clamp

connection, Wemid, yellow, Direct mounting

EAN 4008190378844

Qty. 100 pc(s).

Product notes

Note, ordering data Diameter of mounting hole for locating clip is 3.5

mm for sheet thickness 0.6-1.2 mm.

Note, technical data Snap-on clip

Product description Terminal blocks for different fixing systems

Note, accessories Terminals can be cross-connected with the help of

the ZQB 2.5 (1677120000).

PT OKIECEx/ATEX rating data

EU-type examination certificate KEMA97ATEX2755U

Download, German KEMA97ATEX2755U_d.pdf

Download English KEMA97ATEX2755U_e.pdf

ATEX voltage 550 V

ATEX current 21 A

ATEX conductor cross-section 2.5 mm²

Voltage when using cross-connections CrossConnectionGuide.pdf

Operating temperature range Einsatztemperaturbereich siehe EG-

Baumusterprüfbescheinigung/IECEx-Certificate of

Conformity

Marking EN 60079-7 Ex e II

Marking ATEX Directive 94/9/EC Ex II 2 G D

Additional technical data

Colour of insulating material yellow

Connection direction top

End plate required Yes

Explosion-tested version "Ex e" Yes

Product catalogue | Terminals | Tension clamp technology | Mini modular terminals | Clip-in fixing

- 2 -

Additional technical data

Installation advice Direct mounting

Insulating material Wemid

Levels cross-connected internally No

No. of levels 1

No. of terminal strips per level 4

Open sides right

Operating temperature range - 50 °C, + 120 °C

Product family Z-series

Type of connection Tension clamp connection

Type of mounting Snap-on (with clip fitting)

UL 94 flammability rating of insulation material V-0

Version Central terminal

CSA rating data

Voltage (CSA) 600 V

CSA current 25 A

Min. cross-section (CSA) AWG 26

Max. cross-section (CSA) AWG 12

Conductors for clamping (additional

connection)

Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm²

Flexible with ferrule, max. (DIN 46228 pt 1) 1.5 mm²

Conductors for clamping (rated connection)

Clamping range, min. 0.13 mm²

Clamping range, max. 4 mm²

Type of connection Tension clamp connection

Connection direction top

No. of connections 4

Stripping length 10 mm

Blade size 0.6 x 3.5 mm

Gauge to IEC 60947-1 A2

Solid, min. 0.5 mm²

Solid, max. 4 mm²

Flexible, min. 0.5 mm²

Flexible, max. 2.5 mm²

Flexible with ferrule, min. (DIN 46228/1) 0.5 mm²

Flexible with ferrule, max. (DIN 46228/1) 1.5 mm²

Flexible, min., ferrule with plastic collar (DIN

46228 pt 4)

0.5 mm²

Flexible, max., ferrule with plastic collar (DIN

46228 pt 4)

1.5 mm²

AWG conductor size, min. AWG 26

AWG conductor size, max. AWG 12

AWG conductor size, min. 0.13 mm²

AWG conductor size, max. 2.5 mm²

Dimensions

Width 10.2 mm

Height of lowest version 29 mm

Product catalogue | Terminals | Tension clamp technology | Mini modular terminals | Clip-in fixing

- 3 -

Dimensions

Length 33.5 mm

TS 15 offset 17 mm

Rating data

Rated cross-section 2.5 mm²

Rated voltage 800 V

Rated impulse voltage 8 kV

Rated current 24 A

Standards IEC 60947-7-1

Current with max. conductor 30 A

Pollution severity 3

UL rating data

Voltage (UL) 600 V

Current (UL) 20 A

Min. cross-section (UL) AWG 26

Max. cross-section (UL) AWG 12

Approvals

Approvals institutes

Classifications

eClass 4.1 27-14-11-23

eClass 5.0 27-14-11-20

eClass 5.1 27-14-11-20