Han-Kit® Complete Connector Sets
Industrial Connectors for Applications
up to 500 V / 16 A
Han® Data Sheet 0031-2
People | Power | Partnership
HARTING Electric
Han-Kit®
Page 2
Cable Gland
Hood
Male contacts
Male insert
Female insert
Female contacts
Bulkhead mounted housing
Economical and Reliable Connections - 1 Kit per Package - Easy Choice for You!
Specications
VDE 0110 Table for clearance and
creepage distances
DIN EN 61 984
VDE 0627 Connectors
Safety requirements and
Tests
Standards
DIN EN 175 301-801
Approvals
UL, CSA, SEV for inserts
Certied accd. to EN ISO 9001
in design/ development, production,
installation and service.
General Remarks:
It is the user‘s responsibility to check
whether the componenets belonging
to these kits comply with different
regulations from those stated in spe-
cial elds of application which we are
unable to foresee.
We reserve the right to modify designs
in order to improve quality and keep
pace with technological requirements
in production.
No part of this information leaet must
be reproduced in any form (print, pho-
tocopy, microlm or any other process)
processed, duplicated or distributed by
means of electronc systems without
the written permission of HARTING
ELectric GmbH & Co. KG, Espelkamp
(Copyright Law, Fair Trading Law, Civil
Code).
We are bound by the German version
only.
Note
Connectors should not be cou-
pled or decoupled under electri-
cal load.
Connectors of the same or
different series being mounted
side by side may be protected
against incorrect mating by the
use of coding options.
Connector Set Up
Han® 3 A Han® 10 B
Han-Kit®
Page 3
Screw Terminal
Inserts Stripping
length
Sheath
length
a (mm) x (mm)
Han 3A ... + 4A... 4.5 40
Han 10 A 7 85
Han 16 A 7 100
Han 6 E 7 70
Han 10 E 7 90
Han 16 E 7 110
Han 24 E 7 130
Recommended Tightening Torques and Screw Driver Blades
Size of
screw
Type of
connector
Tigh-
tening
torque
[Nm]
Tigh-
tening
torque
[lbft]
Recomm.
screw driver
blade [mm]
M3 Screw terminal
Han 3A.../4A...
0.25 0.4 0.5 x 2.5
M3 Screw terminal
Han 10A + 16A
Han 6B - 24 B
0.5 0.4 0.5 x 3.5
M3.5 PE contact
Han 10A + 16A
1.2 0.9 0.5 x 3.5
M4 PE contact
Han 6B - 24 B
1.2 0.9 0.5 x 3.5
Derating Diagrammes
The current carrying capacitiy is limited by the thermal properties of materials which are used for inserts as well as by the
insulation materials. The rated current is the continuous, not interrupted current a connector can take when simultaneous
power on all contacts is given, without exceeding the maximum temperature according to DIN IEC 60 512-3.
1 = Han 3 A / 4 A
2 = Han 10 A
3 = Han 16 A
1 = Han 6 E
2 = Han 10 E
3 = Han 16 E
4 = Han 24 E
Operating current [A]
Ambient temperature [°C] Ambient temperature [°C]
Operating current [A]
Wire gauge 2.5 mm²
Wire gauge 2.5 mm²
Han-Kit®
Page 4
Han® 3 A Metal Version Part-Number Dimensions in mm
10 20 003 0001
10 20 003 0003
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
Han-Kit®-3AGM
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A straight
Material Die cast zinc alloy
Protection degree2) IP 67
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 3 A, 3-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Han-Kit®-3AWM
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A angled
Material Die cast zinc alloy
Protection degree2) IP 67
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 3 A, 3-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
10 20 003 0005
Han-Kit®-3AWSM
Hood Han® 3 A angled
Bulkhead mounted hous.1) Han® 3 A straight
Material Die cast zinc alloy
Protection degree2) IP 67
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 3 A, 3-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
1) Bulkhead mounted housing
with ange gasket
2) Protection degree acc. to DIN
EN 60 529 in locked position
3) For only use in grounded
circuits
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
Han-Kit®
Page 5
Han® 3 A Plastic Version Part-Number
10 20 003 0002
10 20 003 0004
Dimensions in mm
Han-Kit®-3AGK
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A straight
Material Plastic
Protection degree2) IP 67
Cable gland M20, plastic
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 3 A, 3-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Han-Kit®-3AWK
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A angled
Material Plastic
Protection degree2) IP 67
Cable gland M20, plastic
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 3 A, 3-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
1) Bulkhead mounted housing
with ange gasket
2) Protection degree acc. to DIN
EN 60 529 in locked position
3) For only use in grounded
circuits
Han-Kit®
Page 6
Han® 4 A Metal Version Part-Number
10 20 004 0001
10 20 004 0003
Dimensions in mm
Han-Kit®-4AGM
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A straight
Material Die cast zinc alloy
Protection degree2) IP 67
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 4 A, 4-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Han-Kit®-4AWM
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A angled
Material Die cast zinc alloy
Protection degree2) IP 67
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 4 A, 4-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Han-Kit®-4AWSM
Hood Han® 3 A angled
Bulkhead mounted hous.1) Han® 3 A straight
Material Die cast zinc alloy
Protection degree2) IP 67
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 4 A, 4-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
10 20 004 0005
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
1) Bulkhead mounted housing
with ange gasket
2) Protection degree acc. to DIN
EN 60 529 in locked position
3) For only use in grounded
circuits
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
Han-Kit®
Page 7
Han® 4 A Plastic Version Part-Number Dimensions in mm
10 20 004 0002
10 20 004 0004
Han-Kit®-4AGK
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A straight
Material Plastic
Protection degree2) IP 67
Cable gland M20, plastic
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 4 A, 4-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Han-Kit®-4AWK
Hood Han® 3 A straight
Bulkhead mounted hous.1) Han® 3 A angled
Material Plastic
Protection degree2) IP 67
Cable gland M20, plastic
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 4 A, 4-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
10 A 230/400 V 4kV 3
Rated current
Rated voltage
conductor-ground
Rated voltage
conductor-conductor
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
Assembly cut out
bulkhead mounted
housing
22 x 22 mm
1) Bulkhead mounted housing
with ange gasket
2) Protection degree acc. to DIN
EN 60 529 in locked position
3) For only use in grounded
circuits
Han-Kit®
Page 8
Han® 10 A
Han-Kit®-10A
Hood1) Han® 10 A
Material Die cast aluminium alloy
Protection degree2) IP 65
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 10 A, 10-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
16 A 250 V 4kV 3
Rated current
Rated voltage3)
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Part-Number
10 20 010 0000
Han® 16 A
Han-Kit®-16A
Hood1) Han® 16 A
Material Die cast aluminium alloy
Protection degree2) IP 65
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 16 A, 16-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
16 A 250 V 4kV 3
Rated current
Rated voltage3)
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Part-Number
10 20 016 0000
Assembly cut out
bulkhead mounted
housing
73 x 24 mm
Dimensions in mm
Dimensions in mm
Assembly cut out
bulkhead mounted
housing
57 x 24 mm
1) Bulkhead mounted housing with ange gasket
2) Protection degree acc. to DIN EN 60 529 in locked position
3) For use in a un-grounded circuit or a grounded delta circuit
Han-Kit®
Page 9
Han® 6 B
Han-Kit®-6B
Hood1) Han® 6 B
Material Die cast aluminium alloy
Protection degree2) IP 65
Cable gland M20, metal
Cable diameter 5 - 9 mm / 6 - 12 mm
Insert Han® 6 E, 6-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
16 A 500 V 6kV 3
Rated current
Rated voltage3)
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
Part-Number
10 33 006 0000
Han-Kit®-10B
Hood1) Han® 10 B
Material Die cast aluminium alloy
Protection degree2) IP 65
Cable gland M25, metal
Cable diameter 9 - 16 mm / 13 - 18 mm
Insert Han® 10 E, 10-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
16 A 500 V 6kV 3
Rated current
Rated voltage3)
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
10 33 010 0000
Dimensions in mm
Dimensions in mm Han-Kit
6 B
a 48
b 70
Assembly cut out
bulkhead mounted
housing
48x35
Han® 10 B Part-Number Dimensions in mm
Dimensions in mm Han-Kit
10 B
a 60
b 83
Assembly cut out
bulkhead mounted
housing
60 x 35
1) Bulkhead mounted housing with ange gasket
2) Protection degree acc. to DIN EN 60 529 in locked position
3) For use in a un-grounded circuit or a grounded delta circuit
Han-Kit®
Page 10
Han® 16 B Part-Number Dimensions in mm
Dimensions in mm Han-Kit
16 B
a 82
b 103
Assembly cut out
bulkhead mounted
housing
82 x 35
1) Bulkhead mounted housing with ange gasket
2) Protection degree acc. to DIN EN 60 529 in locked position
3) For use in a un-grounded circuit or a grounded delta circuit
Han-Kit®-16B
Hood1) Han® 16 B
Material Die cast aluminium alloy
Protection degree2) IP 65
Cable gland M32, metal
Cable diameter 13-20 mm / 18-25 mm
Insert Han® 16 E, 16-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
16 A 500 V 6kV 3
Rated current
Rated voltage3)
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
10 33 016 0000
Han-Kit®-24B
Hood1) Han® 24 B
Material Die cast aluminium alloy
Protection degree2) IP 65
Cable gland M32, metal
Cable diameter 13-20 mm / 18-25 mm
Insert Han® 24 E, 24-pins + PE
Screw terminal 1-2.5 mm², AWG 18-14
Electrical data accd. to DIN EN 61 9843)
16 A 500 V 6kV 3
Rated current
Rated voltage3)
Rated impulse voltage
Pollution degree
Rated voltage
accd. to UL/CSA 600 V
10 33 024 0000
Dimensions in mm Han-Kit
24 B
a 108
b 130
Assembly cut out
bulkhead mounted
housing
108x35
Han® 24 B Part-Number Dimensions in mm
HARTING Electric
Page 11
Product Range
Industrial Connectors Han®
Feldbus components
Sensor/Actuator components
Han-InduNet® system cables
Fiber optic data link systems
and components
Network components
for industrial communication
Argentina: Condel Electronica
Julian Agüero 3355
(1605) Munro - Pcia. de Buenos Aires
Phone + Fax +54 11 4762.0118
E-Mail: mediavicondel@arnet.com.ar
Roberto Mediavilla
Rivera Indarte 390; (5000) Córdoba
Phone +54 351 425-0567, Fax +54 351 421-2282
E-Mail: rmediavilla@arnet.com.ar
Australia
ADILAM Electronics Pty. Ltd.
14 Nicole Close, North Bayswater
3153 Victoria
Phone +61 3 9737 4900
Fax +61 3 9737 4999
E-Mail: mark.c@adilam.com.au
Internet: www.adilam.com.au
Denmark: Knud Wexøe A/S
Skaettekaeret 11, P.O. Box 152
DK-2840 Holte
Phone +45 45 46 58 00, Fax +45 45 46 58 01
wexoe@wexoe.dk; www.wexoe.dk
Finland: SKS-automaatio OY
Martinkyläntie 50, FIN-01721 Vantaa
Phone +358 9 852 661, Fax +358 9 852 68 20
E-Mail: automaatio@sks.fi
Estonia: SKS-tehnika Ou
Mustamäe tee 55; EE-10621 Tallinn
Phone +372-6819-234, Fax +372-6819-235
peeter.kuus@sks.fi
Hungary: Mile Kft.
Mádi u. 52; H-1104 Budapest
Phone +36-1-431-9800, Fax +36-1-431-9817
milekft@mile-kft.hu; www.mile-kft.hu
India: Sahajanand Impex Pvt. Ltd.
103/ 104, Magnum Opus
Shantinagar, Vakola Santacruz (East)
Mumbai - 400 055, INDIA
Phone +91-22-5692 5151
Fax +91-22-5692 1026
E-Mail: sales@sahajanand.com
Internet: www.sahajanand.com
Island: Smith & Norland
Nóatún 4; IS-105 Reykjavík
Phone +354 520 3000, Fax +354 520 3011
olaf@sminor.is; www.sminor.is
Polen: Soyter Sp. z o. o.
ul. Warszawska 3
05-082 Warszawa - Stare Babice
Phone +48 22 722 0 685
Fax +48 22 722 0 550
handlowy@soyter.com.pl; www.soyter.com
South-Africa
HellermannTyton Pty Ltd.
Private Bag X158 Rivonia 2128
34 Milky Way Avenue
Linbro Business Park 2065
Johannesburg, South Africa
Phone +27 (0)11 879-6600
Fax +27 (0)11 879-6606
E-Mail: sales.jhb@hellermann.co.za
Turkey
Gökhan Elektrik San. Tic. Ltd. Sti.
Perpa Elektrikçiler Is Merkezi A Blok
Kat:7-8-9 No.694
TR - 80270 Okmeydani/Istanbul
Phone +9 0 (212) 2 21 32 36 (pbx)
Fax +9 0 (212) 2 21 32 40
E-Mail: gokhan@gokhanelektrik.com
Austria: HARTING Ges. m. b. H.
Deutschstraße 3, A-1230 Wien
Phone +431/6162121; Fax +431/6162121-21
E-Mail: at@HARTING.com
Belgium: HARTING N.V./S.A.
Doornveld 8, B-1731 Zellik
Phone +322/4660190, Fax +322/4667855
E-Mail: be@HARTING.com
Brazil: HARTING Ltda.
Av. Dr. Lino de Moraes Leme, 255; Pq. Jabaquara
CEP 04360-001 - São Paulo - SP - Brazil
Phone +5511/5034-0073; Fax +5511/5034-4743
E-Mail: br@HARTING.com
China: HARTING (HK) Limited
Shanghai Representative Office
Room 2302 Hong Kong Plaza South Tower
283 Huai Hai Road (M); Shanghai 200021, China
Phone +86 21-6390-6935, 6390-6936
Fax +86 21-6390-6399
E-Mail: ChinaSales@HARTING.com.cn
Czech Republic: HARTING spol. s.r.o.
Mlýnská 2, 16000 Praha 6
Phone +4202/20380450; Fax +4202/20380451
E-Mail: HARTING@HARTING.cz
Internet: www.HARTING.cz
Finland: HARTING Oy
Hakamäenkuja 11 A, FIN-01510 Vantaa
Phone +358 9 350 87 300, Fax +358935087320
E-Mail: fi@HARTING.com
France: HARTING France, Paris Nord 2
B.P.60058 Tremblay en France, 181, av. des Nations
F-95972 Roissy Charles de Gaulle Cédex
Phone +33149383400; Fax +33148632306
E-Mail: fr@HARTING.com
Germany: HARTING Deutschland GmbH & Co. KG
Simeonscarré 1, D-32427 Minden
Phone +49571/8896-0; Fax +49571/8896-282
E-Mail: de.sales@HARTING.com
Great Britain: HARTING Ltd.
Caswell Road, Brackmills Industrial Estate
GB-Northampton, NN4 7PW
Phone +441604/766686, 827500; Fax +441604/706777
E-Mail: gb@HARTING.com
Internet: www.HARTING.co.uk
Hong Kong: HARTING (HK) Limited
Regional Office Asia Pacific
4208 Metroplaza Tower 1, 223 Hing Fong Road
Kwai Fong, N. T., Hong Kong
Phone +852/2423-7338, Fax +852/2480-4378
E-Mail: AsiaPacific@HARTING.com.hk
Italy: HARTING SpA
Via Dell‘ Industria 7
I-20090 Vimodrone (Milano)
Phone +3902/250801, Fax +3902/2650597
E-Mail: it@HARTING.com
Japan: HARTING K. K.
Yusen Shin-Yokohama 1 Chome Bldg., 2F
1-7-9, Shin-Yokohama, Kohoku-ku, Yokohama
222-0033 Japan
Tel: +81 45 476 3456; Fax: +81 45 476 3466
E-Mail: JapanSales@HARTING.com
Internet: www.HARTING.co.jp
Korea: HARTING Korea Limited
14/F FKI Building, 28-1 Yoido-dong
Youngdungpo-Gu, Seoul 150-756, Korea
Phone +82 2-784-4614, 784-4615
Fax +82 2-3776-0070
E-Mail: KoreaSales@HARTING.co.kr
Netherlands: HARTING B.V.
Larenweg 44, NL-5234 KA ‚s-Hertogenbosch
Postbus 3526, NL-5203 DM ‚s-Hertogenbosch
Phone +3173/6410404; Fax +3173/6440699
E-Mail: verkoop.nl@HARTING.com
Norway: HARTING A/S
Østensjøveien 36, N-0667 Oslo
Phone +4722/700555; Fax +4722/700570
E-Mail: no@HARTING.com
Portugal: HARTING Iberia S.A.
Josep Tarradellas 20-30 4o 6a; E-08029 Barcelona
Phone +34 933 638 475; Fax +34 934 199 585
E-Mail: es@HARTING.com
Russia: HARTING ZAO
ul. Tobolskaja 12
Saint Petersburg, 194044 Russia
Phone +7/812/3276477; Fax +7/812/3276478
E-Mail: info@HARTING.ru
Internet: www.HARTING.ru
Singapore: HARTING Singapore Pte Ltd.
No. 1 Coleman Street, #B1-21 The Adelphi
Singapore 179803
Phone +6562255285, Fax +6562259947
E-Mail: SEAsiaSales@HARTING.com.my
Spain: HARTING Iberia S.A.
Josep Tarradellas 20-30 4o 6a; E-08029 Barcelona
Phone +34 933 638 475; Fax +34 934 199 585
E-Mail: es@HARTING.com
Sweden: HARTING AB
Gustavslundvägen 141B; S-16751 Bromma
Phone +468/4457171; Fax +468/4457170
E-Mail: se@HARTING.com
Switzerland: HARTING AG
Industriestrasse 26, CH-8604 Volketswil
Phone +4119082060, Fax +4119082069
E-Mail: ch.zh@HARTING.com
Taiwan: HARTING R.O.C. Limited
Room 6, 10 Floor, No. 171
Sung-Te Road, Taipei, Taiwan
Phone +886-2-2346-3177; Fax +886-2-2346-2690
E-Mail: TaiwanSales@HARTING.com.tw
USA: HARTING Inc. of North America
1370 Bowes Road; Elgin, Illinois 60123
Phone +1 847 / 741 1500
Fax +1 847 / 741 8257 (Customer Service)
Fax +1 847 / 717 9420 (Sales+Marketing)
E-Mail: more.info@HARTING.com
Internet: www.HARTING-USA.com
Eastern Europe
HARTING Eastern Europe GmbH
Marienwerderstraße 3, D-32339 Espelkamp
Phone +495772/47-802; Fax +495772/47-90 802
E-Mail: eastern.europe@HARTING.com
Other countries
Please contact your Global Business Unit
HARTING Electric GmbH & Co. KG
P.O. Box 14 73
D-32328 Espelkamp
Phone +49 57 72 / 47- 97 100
Fax +49 57 72 / 47- 4 95
E-Mail: HARTING.electric@HARTING.com
Internet: www.HARTING.com
Subsidiary companies – worldwide Representatives
– worldwide
Global Business Unit
Electric
Your Contact Partner