Compact Filtered Power Entry Module
Approvalsn Compact size
n Rated currents up to 10A
n Complies with IEC/EN 60601
n High quality 2-pole rocker switch
n Good attenuation performance (CQC approval pending)
Typical electrical schematic
N
PE
P
Line
Cx R 2xL1 2xCy
Load
N‘
PE‘
P‘
Standard types and B types
Features and benefits
n
Excellent conducted attenuation perfor-
mance, based on chokes with high
saturation resistance and good thermal
behavior
n
High quality 2-pole rocker switch for
all-pole disconnection
n
Faston terminals for easy assembly
n
Medical version (B Type) according
IEC/EN60601-1
Typical applications
n
Portable electrical and electronic
equipment
n
EDP and office equipment
n
Single-phase power supplies
n
Switch-mode power supplies
n
Test and measurement equipment
n
Medical electrical devices (MD) and
In-Vitro
-Diagnostics (IVD) equipment
The FN 9264 power entry module combines
an IEC inlet, a mains filter with a 2-pole
rocker switch in a compact housing.
Choosing the FN 9264 product line brings
you the rapid availability of a standard
filter associated with the necessary safety
acceptances and good attenuation perfor-
mance in compliance with EN/IEC 60601 for
medical devices.
Standard IEC connector filters are a practi-
cal solution to pass EMI system approval in
a short time. A wide selection of amperage
ratings, mounting possibilities and filters for
medical applications are designed to offer
various solution.
Typical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: 50 to 400Hz
Rated currents: 1 to 10A @ 40°C max.
High potential test voltage for capacitors: P –> PE 2000VAC for 2 sec (Standard)
P –> PE 2500VAC for 2 sec (B-types)
P –> N 760VAC for 2 sec
Protection category: IP40 according to IEC 60529
Temperature range (operation and storage): -25°C to +85°C (25/85/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to: UL 94V-2 or better
MTBF @ 40°C/230V (Mil-HB-217F): ≥ 616,000 hours
Rocker switch description:
Function: 2-pole, dark not illuminated
Marking I - 0
Electrical specifications: Inrush current 100A
10,000 on-off operations according to UL 1054,
TV 5
Switch ratings:
USA (UL): 10A, 125VAC 1HP; 250VAC 2HP;
Canada (CSA): 10A, 125VAC 1HP; 250VAC 2HP;
Europe (ENEC): 10A (4A), 250VAC*
* Value in () relates to the inductive current charge: cos g = 0.65
IEC inlet filters
FN 9264