MSM (Military M83401/04 to /09)
www.vishay.com Vishay Dale
Revision: 26-Feb-13 1Document Number: 31514
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified,
Type RZ040 to RZ090, Single-In-Line, Molded SIP
FEATURES
Isolated, bussed and dual terminator schematics available
MIL-PRF-83401 qualified
0.195" (4.95 mm) “A” and 0.350" (8.89 mm) “C” maximum
seated heights
Thick film resistive elements
TCR available in “K” (± 100 ppm/°C) or “M”
(± 300 ppm/°C) characteristic
All device leads are hot-solder dipped
Rugged molded case construction
Compatible with automatic insertion equipment
100 % screen tested per group A, subgroup 1 of
MIL-PRF-83401
All devices are capable of passing the MIL-STD-202,
method 210, condition D “Resistance to Soldering Heat
test
Available in tube pack
Notes
(1) ± 2 % standard, ± 1 % and ± 5 % available.
(2) K = ± 100 ppm/°C; M = ± 300 ppm/°C.
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL/
PIN NO/
PROFILE
MIL
STYLE
MIL
SPEC.
SHEET
SCHEMATIC
POWER
RATING
ELEMENT
P70 °C
W
POWER
RATING
PACKAGE
P70 °C
W
RESISTANCE
RANGE
TOLERANCE (1)
± %
TEMPERATURE
COEFFICIENT (2)
(- 55 °C to + 125 °C)
± ppm/°C
WEIGHT
g
MSM06C RZ040 04
01 (C) 0.20 1.00 10 to 1M
1, 2, 5 100, 300 0.703 (G) 0.20 0.60 10 to 1M
05 (H) 0.11 0.88 Consult factory
MSM08C RZ050 05
01 (C) 0.20 1.40 10 to 1M
1, 2, 5 100, 300 0.903 (G) 0.20 0.80 10 to 1M
05 (H) 0.11 1.32 Consult factory
MSM10C RZ060 06
01 (C) 0.20 1.80 10 to 1M
1, 2, 5 100, 300 1.103 (G) 0.20 1.00 10 to 1M
05 (H) 0.11 1.80 Consult factory
MSM06A RZ070 07
01 (C) 0.12 0.60 10 to 1M
1, 2, 5 100, 300 0.403 (G) 0.12 0.36 10 to 1M
05 (H) 0.07 0.60 Consult factory
MSM08A RZ080 08
01 (C) 0.12 0.84 10 to 1M
1, 2, 5 100, 300 0.503 (G) 0.12 0.48 10 to 1M
05 (H) 0.07 0.84 Consult factory
MSM10A RZ090 09
01 (C) 0.12 1.08 10 to 1M
1, 2, 5 100, 300 0.603 (G) 0.12 0.60 10 to 1M
05 (H) 0.07 1.08 Consult factory
MSM (Military M83401/04 to /09)
www.vishay.com Vishay Dale
Revision: 26-Feb-13 2Document Number: 31514
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
For additional information on packaging, refer to the Through Hole Network Packaging document (www.vishay.com/doc?31542).
DIMENSIONS in inches (millimeters)
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340107K1003GCD03 (preferred part numbering format)
MIL
STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE
TOLERANCE
CODE SCHEMATIC PACKAGING
M83401 04 = 6 pin, “C” profile
05 = 8 pin, “C” profile
06 = 10 pin, “C” profile
07 = 6 pin, “A” profile
08 = 8 pin, “A” profile
09 = 10 pin, “A” profile
K = 100 ppm
M = 300 ppm
3 digit significant
figure, followed
by a multiplier
10R0 = 10
3302 = 33 k
1004 = 1 M
F = ± 1 %
G = ± 2 %
J = ± 5 %
C = Bussed
G = Isolated
D03 =
Tin/lead, tube
DSL =
Tin/lead, tube,
single lot
date code
Historical Part Number example: M8340107K1003GC (will continue to be accepted)
M83401 07 K 1003 G C D03
MIL
STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE
TOLERANCE
CODE SCHEMATIC PACKAGING
New Global Part Numbering: M8340104KA001GHD03 (preferred part numbering format)
MIL
STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE
TOLERANCE
CODE SCHEMATIC PACKAGING
M83401 04 = 6 pin, “C” profile
05 = 8 pin, “C” profile
06 = 10 pin, “C” profile
07 = 6 pin, “A” profile
08 = 8 pin, “A” profile
09 = 10 pin, “A” profile
K = 100 ppm
M = 300 ppm
Per std. MIL Spec
(see Impedance
Codes table)
F = ± 1 %
G = ± 2 %
J = ± 5 %
H = Dual
terminator
D03 =
Tin/lead, tube
DSL =
Tin/lead, tube,
single lot
date code
Historical Part Number example: M8340104KA001GH (will continue to be accepted)
M83401 04 K A001 G H D03
MIL
STYLE SPEC SHEET CHARACTERISTIC RESISTANCE
VALUE
TOLERANCE
CODE SCHEMATIC PACKAGING
“A” Profile
0.100 ± 0.005
(2.54 ± 0.127)
Non-Accumulative
0.040 + 0.009
- 0.015
(1.02 + 0.229
- 0.381) 0.017 ± 0.004
(0.432 ± 0.102)
0.135 + 0.015
- 0.010
(3.43 + 0.381
- 0.254)
0.030 + 0.005
- 0.015
(0.762 + 0.127
- 0.381)
B
C Equal Space
0.187 + 0.008
- 0.010
(4.75 + 0.203
- 0.254)
A
Pin # 1
“C” Profile
B
C Equals Spaces
0.342 + 0.008
- 0.010
(8.69 + 0.203
- 0.254)
0.135 + 0.015
- 0.010
(3.43 + 0.381
- 0.254)
0.040 + 0.009
- 0.015
(1.02 + 0.229
- 0.381)
0.100 ± 0.005
(2.54 ± 0.127)
Non-Accumulative
0.030 + 0.005
- 0.015
(0.762 + 0.127
- 0.381)
A
Pin # 1
0.017 ± 0.004
(0.432 ± 0.102)
VISHAY DALE MODEL
MSM06
MSM08
MSM10
B
0.500
(12.70)
0.700
(17.78)
0.900
(22.86)
A
0.583 ± 0.015
(14.81 ± 0.381)
0.783 ± 0.015
(19.89 ± 0.381)
0.983 ± 0.015
(24.97 ± 0.381)
C
5
7
9
0.098 max.
(2.49 max.)
0.012 ± 0.004
(0.305 ± 0.102)
0.098 max.
(2.49 max.)
0.012 ± 0.004
(0.305 ± 0.102)
8340107K1M003GCD03
8340104KAM001GHD03
MSM (Military M83401/04 to /09)
www.vishay.com Vishay Dale
Revision: 26-Feb-13 3Document Number: 31514
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Offered for the M83401/09 product only
TECHNICAL SPECIFICATIONS
PARAMETER UNIT MSM SERIES
Maximum Operating Voltage VDC 50
Voltage Coefficient of Resistance Veff < 50 ppm
Dielectric Strength VAC 200 min.
Insulation Resistance 10 000M
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Body Molded epoxy
Terminals Copper alloy, hot-solder dipped
Solderability Per MIL-PRF-83401
CAGE CODE: 91637 and SH903
MILITARY IMPEDANCE CODES
CODE R1 () R2 ()CODER
1 () R2 ()
A001 82 130 A011 330 680
A002 120 200 A012 1.5K 3.3K
A003 130 210 A013 3K 6.2K
A004 160 260 A014 180 270
A005 180 240 A015 270 270
A006 180 390 A016 560 560
A007 220 270 A017 560 1.2K
A008 220 330 A018 620 2.7K
A009 330 390 A019 (1) 150 1K
A010 330 470 A020 (1) 1K 1K
MSM (Military M83401/04 to /09)
www.vishay.com Vishay Dale
Revision: 26-Feb-13 4Document Number: 31514
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DERATING
01 Schematic
03 Schematic
05 Schematic
“A” Profile
1.08
0.12
MSM10A Package
MSM08A Package
MSM06A Package
Single Resistor
- 55 0+ 25 + 70 + 125 + 150
0.60
0.84
Power Rating (W)
Ambient Temperature °C
1.00
1.40
1.80
0.20
“C” Profile
MSM10C Package
MSM08C Package
MSM06C Package
Single Resistor
- 55 0 + 25 + 70 + 125 + 150
Power Rating (W)
Ambient Temperature °C
0.60
0.48
0.36
0.12
MSM10A Package
MSM08A Package
MSM06A Package
Single Resistor
“A” Profile
- 55 0 + 25 + 70 + 125 + 150
Power Rating (W)
Ambient Temperature °C
0.20
1.00
0.80
Single Resistor
MSM06C Package
MSM10C Packag e
MSM08C Package
0.60
“C” Profile
- 55 0 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
“A” Profile
1.08
0.84
0.60
0.07 Single Resistor
MSM06A Package
MSM08A Package
MSM10A Package
- 55 0 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
“C” Profile
1.80
1.32
0.88
0.1 1
MSM10C Package
MSM08C Package
MSM06C Package
Single Resistor
- 55 0 + 25 + 70 + 125 + 150
Ambient Temperature °C
Power Rating (W)
MSM (Military M83401/04 to /09)
www.vishay.com Vishay Dale
Revision: 26-Feb-13 5Document Number: 31514
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CIRCUIT APPLICATIONS
01 Schematic 5, 7 or 9 resistors with one pin common
“A” Profile
MSM06A01 (M8340107xxxxxxC)
MSM08A01 (M8340108xxxxxxC)
MSM10A01 (M8340109xxxxxxC)
“C” Profile
MSM06C01 (M8340104xxxxxxC)
MSM08C01 (M8340105xxxxxxC)
MSM10C01 (M8340106xxxxxxC)
The MSM06A01, MSM08A01, MSM10A01, MSM06C01, MSM08C01,
and MSM10C01 molded single-in-line resistor networks provide the
user with a choice of 5, 7, or 9 nominally equal resistors, each
connected to a common pin (Pin No. 1).
Commonly used in the following applications:
• “Wired OR” pull-up
• Power Gate pull-up
• MOS/ROM pull-up/pull-down
• Open collector pull-up
• TTL input pull-down
• TTL unused gate pull-up
03 Schematic 3, 4 or 5 isolated resistors
“A” Profile
MSM06A03 (M8340107xxxxxxG)
MSM08A03 (M8340108xxxxxxG)
MSM10A03 (M8340109xxxxxxG)
“C” Profile
MSM06C03 (M8340104xxxxxxG)
MSM08C03 (M8340105xxxxxxG)
MSM10C03 (M8340106xxxxxxG)
The MSM06A03, MSM08A03, MSM10A03, MSM06C03, MSM08C03,
and MSM10C03 molded single-in-line resistor networks provide the
user with a choice of 3, 4, or 5 nominally equal resistors. Each resistor
is isolated from all others.
Commonly used in the following applications:
• “Wired OR” pull-up
• Power driven pull-up
• Power gate pull-up
• Line termination
• Long-line impedance balance
• LED current limiting
• ECL output pull-down
• TTL input pull-down
05 Schematic 4, 6 or 8 resistor pairs
“A” Profile
MSM06A05 (M8340107xxxxxxH)
MSM08A05 (M8340108xxxxxxH)
MSM10A05 (M8340109xxxxxxH)
“C” Profile
MSM06C05 (M8340104xxxxxxH)
MSM08C05 (M8340105xxxxxxH)
MSM10C05 (M8340106xxxxxxH)
The MSM06A05, MSM08A05, MSM10A05, MSM06C05, MSM08C05,
and MSM10C05 molded single-in-line resistor networks provide the
user with a choice of 4, 6, or 8 pair of R1/R2 resistor values for pulse
squaring and TTL dual-line terminating requirements.
PERFORMANCE
TEST CONDITIONS MAX. R (TYPICAL TEST LOTS)
Power Conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % R
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % R
Short Time Overload 2.5 x rated working voltage for 5 s ± 0.25 % R (Characteristic K)
± 0.50 % R (Characteristic M)
Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % R (Characteristic K)
± 0.50 % R (Characteristic M)
Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % R
Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of body for 10 s ± 0.25 % R
Shock Total of 18 shocks at 100 g’s ± 0.25 % R
Vibration 12 h at maximum of 20 g’s between 10 Hz and 2000 Hz ± 0.25 % R
Load Life 1000 h at + 70 °C, rated power applied
1.5 h “ON”, 0.5 h “OFF” for full 1000 h period
± 0.50 % R (Characteristic K)
± 2.00 % R (Characteristic M)
Terminal Strength 4 1/2 pound pull for 30 s ± 0.25 % R
Insulation Resistance 10 000 M (minimum) -
Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) -
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R
2
R
1
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.