SPECIFICATION Part No. : EMPCB.SMAFSTJ.B.HT Product Name : SMA (F) Jack For Edge PCB Mount Feature : SMA(F) Jack Straight Edge Mount PCB Jack Frequency Range: 12.4GHz Finish: Gold Leg Length: 3.8mm Total Length: 13.3mm RoHS Compliant SPE-12-8-134/A/WY Page 1 of 3 1. Introduction The EMPCB.SMAFSTJ.B.HT connector was designed to be mounted on a PCB edge. The edge mount configuration allows the connector to be easily slotted onto a PCB board; the maximum thickness of PCB that the connector can be used with is 0.8mm. The connector pin is directly soldered onto pads on the PCB. The connector is a standard SMA (F) Jack. The SMA connector is the most popular type connector for RF applications. Taoglas connectors are all RoHS compliant. 2. Specification ELECTRICAL Impedance 50 Frequency Range 0~12.4 GHz Working Voltage Max. 335 Vrms Insulation Resistance Min. 5000M ohms MECHANICAL Connector Dimension 6.35 X 6.35 X13.3 mm Max. Thickness PCB acceptable 0.8 mm Connector Pin Diameter 0.76 mm Connector Type SMA (F) to PCB Edge Mounted ENVIRONMENTAL RoHS compliant SPE-12-8-134/A/WY Page 2 of 3 3. Connector Drawing Name Material Finish QTY 1 Body Brass Gold 1 2 Pin Brass Gold 1 3 Insulator Teflon White 1 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright (c) 2012, Taoglas Ltd. SPE-12-8-134/A/WY Page 3 of 3