PME271M/E * EMI suppressor, classes X1 and X2, metallized paper * 0.001 - 0.6 F, 275/300 VAC, +110 C L Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. TECHNICAL DATA PME271M PME271E Rated voltage VAC, 50/60Hz 275 300 Capacitance range F 0.001-0.6 0.01-0.22 Temperature range C -40/+110 -40/+110 Climatic category IEC 40/110/56/B 40/110/56/B Capacitance tolerance 10% for C > 0.1 F, code K. 20% for C 0.1 F, code M Approvals S, N, D, FI, VDE, SEV, IMQ, UL, CSA p 0.5 d d = 0.6 for p = 10.2 0.8 for p = 15.2, 20.3, 22.5 1.0 for p = 25.4 l = standard 30 +5/-0 mm (code R30) option short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request. dB Attenuation 70 0.47 F 60 Dissipation factor tan Insulation resistance In DC applications B CONSTRUCTION H TYPICAL APPLICATIONS The capacitors are intended for use as interference suppressors in X1 or X2 (across-the-line) applications. * The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. * Good resistance to ionisation due to impregnated dielectric. * High dU/dt capability. * Small dimensions. * Safety approvals for worldwide use. * The capacitors meet the most stringent IEC humidity class, 56 days. l * The highest possible safety regarding active and passive flammability. * Self-extinguishing UL 94V-0 encapsulation material. * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. 1.3 % at 1 kHz 0.047 F 50 0.0047 F 40 C 0.33 F 12000 M C > 0.33 F 4000 s Measured at 500 VDC after 60 s, +23C 30 20 10 Recommended voltage: 630 VDC f 0 Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead lengths. Test voltage between terminals The 100% screening factory test is carried out at 2150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. 1 3 5 10 30 100 200 MHz Suppression versus frequency. Typical values. ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each, 10 - 500 Hz at 0.75 mm or 98 m/s2 No visible damage, No open or short circuit Bump IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2 No visible damage, No open or short circuit Solderability IEC 60068-2-20, Test Ta Solder globule method Wetting time Active flammability EN 132400 Passive flammability IEC 60384-14 (1993), EN 132400 Humidity 162 IEC 60068-2-3, Test Ca +40C and 90 - 95% R.H. 56 days for d 0.8 < 1 s for d > 0.8 < 1.5 s PME271M/E ARTICLE TABLE p Quantity per package reel R30 R06 taped Weight pcs pcs pcs g Approvals fO MHz Max dU/dt V/s S N D FI VDE SEV IMQ UL CSA Capaci- Max dimensions tance in mm F B H L Article code CLASS X2 275 VAC +110 C PME271 M 0.0010 0.0015 0.0022 0.0033 0.0047 3.9 3.9 3.9 4.1 5.1 7.5 7.5 7.5 8.2 10.5 13.5 13.5 13.5 13.5 13.5 10.2 10.2 10.2 10.2 10.2 1000 1000 1000 1000 800 2000 2000 2000 2000 1600 700 700 700 600 600 0.7 0.7 0.7 0.9 1.2 53 44 37 30 24 1200 1200 1200 1200 1200 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 5.2 5.2 5.2 6.0 6.0 6.0 7.8 8.5 10.5 10.5 10.5 12.5 12.5 12.5 13.5 14.3 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 15.2 15.2 15.2 15.2 15.2 15.2 15.2 15.2 500 500 500 400 400 400 400 300 1000 1000 1000 800 800 800 800 500 600 600 600 400 400 400 400 350 1.7 1.7 1.7 3.0 3.0 3.0 3.3 3.8 19 16 13 10 8.4 7.0 5.6 4.3 1200 1200 1200 1200 1200 1200 1200 1200 0.10 0.15 0.22 7.6 9.0 11.3 14.0 15.0 16.5 24.0 20.3 24.0 20.3 24.0 20.3 250 200 150 1500 1200 1000 250 250 180 4.0 5.0 7.0 4.1 3.4 2.7 600 600 600 PME271M610MR30 PME271M615KR30 PME271M622KR30 0.10 0.15 0.22 0.27 0.33 8.0 8.0 10.0 12.0 12.0 17.0 17.0 19.0 22.0 22.0 27.0 27.0 27.0 27.0 27.0 22.5 22.5 22.5 22.5 22.5 200 200 150 100 100 1200 1200 1000 800 800 250 250 200 5.5 5.5 7.5 10.0 10.0 3.9 3.3 2.6 2.3 2.1 600 600 600 400 400 PME271MD6100MR30 PME271MD6150KR30 PME271MD6220KR30 PME271MD6270KR30 PME271MD6330KR30 0.27 0.33 0.47 0.60 10.5 12.1 15.3 15.3 17.3 19.0 22.0 22.0 30.5 30.5 30.5 30.5 25.4 25.4 25.4 25.4 100 100 75 75 1000 800 600 600 8.5 10.0 15.0 15.0 2.4 2.1 1.8 1.6 400 400 400 400 PME271M627KR30 PME271M633KR30 PME271M647KR30 PME271M660KR30 PME271E510MR30 PME271E515MR30 PME271E522MR30 PME271E533MR30 PME271E547MR30 PME271M410MR30 PME271M415MR30 PME271M422MR30 PME271M433MR30 PME271M447MR30 PME271M468MR30 PME271M510MR30 PME271M515MR30 PME271M522MR30 PME271M533MR30 PME271M547MR30 PME271M568MR30 PME271MB6100MR30 CLASS X1 300 VAC +110 C PME271 E 0.010 0.015 0.022 0.033 0.047 5.2 5.2 7.3 7.3 8.5 10.5 10.5 13.0 13.0 14.3 18.5 18.5 19.0 19.0 18.5 15.2 15.2 15.2 15.2 15.2 500 500 400 400 300 1000 1000 800 800 500 600 600 400 400 350 1.7 1.7 3.0 3.0 3.8 16 13 9.8 7.0 6.4 1200 1200 1200 1200 1200 0.068 0.10 7.6 11.3 14.0 16.5 24.0 20.3 24.0 20.3 250 150 1500 1000 250 180 4.5 7.0 5.2 4.1 600 600 PME271E568MR30 PME271E610MR30 0.068 0.10 0.15 0.22 8.0 8.0 10.0 12.0 17.0 17.0 19.0 22.0 27.0 27.0 27.0 27.0 22.5 22.5 22.5 22.5 200 200 150 100 1200 1200 1000 800 250 250 200 5.5 5.5 5.5 5.5 4.7 4.1 3.2 2.5 600 600 600 600 PME271ED5680MR30 PME271ED6100MR30 PME271ED6150KR30 PME271ED6220KR30 0.15 0.22 10.6 12.1 16.1 19.0 30.5 25.4 30.5 25.4 150 100 1000 800 8.6 10.0 3.3 2.6 400 400 PME271E615KR30 PME271E622KR30 163 PME271M/E MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference S EN 132400 9834227-01 (X2), 9821105-01 (X1), N EN 132400 P98102279 (X2), P98101874 (X1) D EN 132400 308048 (X2), 307886 (X1), FI EN 132400 203301 (X2), 202782 (X1), VDE EN 132400 118230 (X2), 117365 (X1), SEV EN 132400 99.7 70053.01 (X2), 99.7 70083.01(X1) IMQ EN 132400 V 4699 (X2), V 4698 (X1), UL UL 1283 (UR = 250 VAC) UL 1414 (UR = 250 VAC) E 100117 (X2, X1) E 73869 (X2) CSA C 22.2 No. 1 (UR = 250 VAC) 53108 (X2) ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. 164 * * * * * * * RIFA RIFA article code Rated capacitance Rated voltage X2 or X1 SH, for self-healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Approval marks * Manufacturing code (year, month) PACKING Capacitors in standard design (lead length 30 mm) and with L < 24 mm and lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/ package as per article table. Capacitors with L 24 mm and lead length 5 or 6 mm are packed on trays piled in a box with dimensions 300 x 260 x 195 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity.