162
PME271M PME271E
275 300
0.001–0.6 0.01–0.22
–40/+110 –40/+110
40/110/56/B 40/110/56/B
± 10% for C > 0.1 µF, code K. ± 20% for C ≤ 0.1 µF, code M
S, N, D, FI, VDE, SEV, IMQ, UL, CSA
≤ 1.3 % at 1 kHz
C ≤ 0.33 µF ≥ 12000 MΩ
C > 0.33 µF ≥ 4000 s
Measured at 500 VDC after 60 s, +23°C
Recommended voltage: ≤ 630 VDC
Tabulated self-resonance frequencies f0 refer to 5 mm
lead lengths.
The 100% screening factory test is carried out at 2150 VDC.
The voltage level is selected to meet the requirements in
applicable equipment standards. All electrical characteristics
are checked after the test.
PME271M/E
•EMI suppressor, classes X1 and X2, metallized paper
•0.001 – 0.6 µF, 275/300 VAC, +110 °C
TYPICAL APPLICATIONS CONSTRUCTION
TECHNICAL DATA
The capacitors are intended for use as
interference suppressors in X1 or X2
(across-the-line) applications.
Multi-layer metallized paper. Encapsulated
and impregnated in self-extinguishing material
meeting the requirements of UL 94V-0.
Rated voltage VAC, 50/60Hz
Capacitance range µF
Temperature range °C
Climatic category IEC
Capacitance tolerance
Approvals
Dissipation factor tanδδ
δδ
δ
Insulation resistance
In DC applications
Resonance frequency
Test voltage between
terminals
ENVIRONMENTAL TEST DATA
Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each, No visible damage, No open or short circuit
10 – 500 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2No visible damage, No open or short circuit
Solderability IEC 60068-2-20, Test Ta Solder globule method Wetting time for d ≤ 0.8 < 1 s
for d > 0.8 < 1.5 s
Active flammability EN 132400
Passive flammability IEC 60384-14 (1993), EN 132400
Humidity IEC 60068-2-3, Test Ca +40°C and 90 – 95% R.H. 56 days
•The highest possible safety regarding
active and passive flammability.
•Self-extinguishing UL 94V-0 encapsulation
material.
•Excellent self-healing properties. Ensures
long life even when subjected to
frequent overvoltages.
•Good resistance to ionisation due to
impregnated dielectric.
•High dU/dt capability.
•Small dimensions.
•Safety approvals for worldwide use.
•The capacitors meet the most stringent
IEC humidity class, 56 days.
•The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially in
applications having continuous
operation.
L
H
B
p ± 0.5
l
∅ d
d = 0.6 for p = 10.2
0.8 for p = 15.2, 20.3, 22.5
1.0 for p = 25.4
l = standard 30 +5/-0 mm (code R30)
option short leads, tolerance +0/-1 mm
(standard 6 mm, code R06)
Other lead lengths on request.
Suppression versus frequency. Typical values.
1 MHz
70
60
50
40
30
20
10
0
f
dB
53010 100
3 200
Attenuation
0.0047 µF
0.047 µF
0.47 µF
163
PME271M/E
ARTICLE TABLE
0.0010 3.9 7.5 13.5 10.2 1000 2000 700 0.7 53 1200 √√√√√ √√√ PME271M410MR30
0.0015 3.9 7.5 13.5 10.2 1000 2000 700 0.7 44 1200 √√√√√ √√√ PME271M415MR30
0.0022 3.9 7.5 13.5 10.2 1000 2000 700 0.7 37 1200 √√√√√ √√√ PME271M422MR30
0.0033 4.1 8.2 13.5 10.2 1000 2000 600 0.9 30 1200 √√√√√ √√√ PME271M433MR30
0.0047 5.1 10.5 13.5 10.2 800 1600 600 1.2 24 1200 √√√√√ √√√ PME271M447MR30
0.0068 5.2 10.5 18.5 15.2 500 1000 600 1.7 19 1200 √√√√√ √√√ PME271M468MR30
0.010 5.2 10.5 18.5 15.2 500 1000 600 1.7 16 1200 √√√√√ √√√√ PME271M510MR30
0.015 5.2 10.5 18.5 15.2 500 1000 600 1.7 13 1200 √√√√√ √√√√ PME271M515MR30
0.022 6.0 12.5 18.5 15.2 400 800 400 3.0 10 1200 √√√√√ √√√√ PME271M522MR30
0.033 6.0 12.5 18.5 15.2 400 800 400 3.0 8.4 1200 √√√√√ √√√√ PME271M533MR30
0.047 6.0 12.5 18.5 15.2 400 800 400 3.0 7.0 1200 √√√√√ √√√√ PME271M547MR30
0.068 7.8 13.5 18.5 15.2 400 800 400 3.3 5.6 1200 √√√√√ √√√√ PME271M568MR30
0.10 8.5 14.3 18.5 15.2 300 500 350 3.8 4.3 1200 √√√√√ √√√√ PME271MB6100MR30
0.10 7.6 14.0 24.0 20.3 250 1500 250 4.0 4.1 600 √√√√√ √√√√ PME271M610MR30
0.15 9.0 15.0 24.0 20.3 200 1200 250 5.0 3.4 600 √√√√√ √√√√ PME271M615KR30
0.22 11.3 16.5 24.0 20.3 150 1000 180 7.0 2.7 600 √√√√√ √√√√ PME271M622KR30
0.10 8.0 17.0 27.0 22.5 200 1200 250 5.5 3.9 600 √√√√√ √√√√ PME271MD6100MR30
0.15 8.0 17.0 27.0 22.5 200 1200 250 5.5 3.3 600 √√√√√ √√√√ PME271MD6150KR30
0.22 10.0 19.0 27.0 22.5 150 1000 200 7.5 2.6 600 √√√√√ √√√√ PME271MD6220KR30
0.27 12.0 22.0 27.0 22.5 100 800 10.0 2.3 400 √√√√√ √√√√ PME271MD6270KR30
0.33 12.0 22.0 27.0 22.5 100 800 10.0 2.1 400 √√√√√ √√√√ PME271MD6330KR30
0.27 10.5 17.3 30.5 25.4 100 1000 8.5 2.4 400 √√√√√ √√√√ PME271M627KR30
0.33 12.1 19.0 30.5 25.4 100 800 10.0 2.1 400 √√√√√ √√√√ PME271M633KR30
0.47 15.3 22.0 30.5 25.4 75 600 15.0 1.8 400 √√√√√ √√√√ PME271M647KR30
0.60 15.3 22.0 30.5 25.4 75 600 15.0 1.6 400 √√√√√ √√√√ PME271M660KR30
CLASS X1 300 VAC +110 °C PME271 E
0.010 5.2 10.5 18.5 15.2 500 1000 600 1.7 16 1200 √√√√√ √√√ PME271E510MR30
0.015 5.2 10.5 18.5 15.2 500 1000 600 1.7 13 1200 √√√√√ √√√ PME271E515MR30
0.022 7.3 13.0 19.0 15.2 400 800 400 3.0 9.8 1200 √√√√√ √√√ PME271E522MR30
0.033 7.3 13.0 19.0 15.2 400 800 400 3.0 7.0 1200 √√√√√ √√√ PME271E533MR30
0.047 8.5 14.3 18.5 15.2 300 500 350 3.8 6.4 1200 √√√√√ √√√ PME271E547MR30
0.068 7.6 14.0 24.0 20.3 250 1500 250 4.5 5.2 600 √√√√√ √√√ PME271E568MR30
0.10 11.3 16.5 24.0 20.3 150 1000 180 7.0 4.1 600 √√√√√ √√√ PME271E610MR30
0.068 8.0 17.0 27.0 22.5 200 1200 250 5.5 4.7 600 √√√√√ √√√ PME271ED5680MR30
0.10 8.0 17.0 27.0 22.5 200 1200 250 5.5 4.1 600 √√√√√ √√√ PME271ED6100MR30
0.15 10.0 19.0 27.0 22.5 150 1000 200 5.5 3.2 600 √√√√√ √√√ PME271ED6150KR30
0.22 12.0 22.0 27.0 22.5 100 800 5.5 2.5 600 √√√√√ √√√ PME271ED6220KR30
0.15 10.6 16.1 30.5 25.4 150 1000 8.6 3.3 400 √√√√√ √√√ PME271E615KR30
0.22 12.1 19.0 30.5 25.4 100 800 10.0 2.6 400 √√√√√ √√√ PME271E622KR30
Quantity per package Approvals
Capaci- Max dimensions reel Max
tance in mm R30 R06 taped Weight fOdU/dt Article code
µF B H L p pcs pcs pcs g MHz V/µs
S
N
D
FI
VDE
SEV
IMQ
UL
CSA
CLASS X2 275 VAC +110 °C PME271 M
164
PME271M/E
ORDERING INFORMATION
The article code for the standard part is given in the article table.
For other options, see page 21.
PACKING
Capacitors in standard design (lead length
30 mm) and with L < 24 mm and lead length
5 or 6 mm are packed bulk in a box with
dimensions 245 x 145 x 80 mm. Quantity/
package as per article table.
Capacitors with L ≥ 24 mm and lead length 5
or 6 mm are packed on trays piled in a box
with dimensions 300 x 260 x 195 mm.
Quantity/package as per article table.
Reels with taped capacitors are packed 10
in a box with dimension 370 x 370 x 560
mm. The standard quantity/reel is for 360
mm reel. If 500 mm reel is required, it must
be specified when ordering and the
quantity is 2 x the given quantity.
MARKING
•RIFA
•RIFA article code
•Rated capacitance
•Rated voltage
•X2 or X1
•SH, for self-healing
•Climatic category according to
IEC 60068-1, appendix A
•Passive flammability class
•Approval marks
•Manufacturing code (year, month)
APPROVALS/REFERENCE DOCUMENTS
Certification Body Specification Approval reference
S EN 132400 9834227-01 (X2), 9821105-01 (X1),
N EN 132400 P98102279 (X2), P98101874 (X1)
D EN 132400 308048 (X2), 307886 (X1),
FI EN 132400 203301 (X2), 202782 (X1),
VDE EN 132400 118230 (X2), 117365 (X1),
SEV EN 132400 99.7 70053.01 (X2),
99.7 70083.01(X1)
IMQ EN 132400 V 4699 (X2), V 4698 (X1),
UL UL 1283 (UR = 250 VAC) E 100117 (X2, X1)
UL 1414 (UR = 250 VAC) E 73869 (X2)
CSA C 22.2 No. 1 53108 (X2)
(UR = 250 VAC)
