T63 www.vishay.com Vishay Sfernice 1/4" Multi-Turn Fully Sealed Container Cermet Trimmer FEATURES * 0.25 W at 70 C * Industrial grade * Tests according to CECC 41000 or IEC 60393-1 * Multi-turn operation * Low contact resistance variation < 2 % Due to their square shape and small size (6.8 mm x 6.8 mm x 5 mm), the multi-turn trimmers of the T63 series are ideally suited for PCB use, enabling high density board mounting with reduced space requirement between cards. * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Six versions are available differing by the top or side position of the adjustment screw and by PC pins configuration. The use of cermet for the resistive track ensures an excellent stability of nominal specifications throughout life. DIMENSIONS in millimeters ( 0.5 mm) Terminal Spacing on a 2.54 PCB T63XA 6.8 0.2 4 min. O 0.45 2.54 2.54 Screwdriver slot 0.5 x 0.5 2.3 0.2 5 max. a b c 0.25 6.8 0.2 0.7 O 1.8 a b c 1 0.1 5.7 0.1 T63XB 6.8 0.2 4 min. 1.2 0.3 5 max. 2.54 2.54 a b c 0.25 6.8 0.2 2.54 Screwdriver slot 0.5 x 0.5 0.7 O 1.8 a b c 1 0.1 5.7 0.1 T63YA 7.8 max. O 0.45 5 max. 6.8 0.2 4 min. 1 0.1 2.54 a b c 0.25 O 1.8 6.8 0.2 2.54 2.3 0.2 T63YB 1.2 0.3 6.8 0.2 4 min. 2.54 2.54 5 max. 1 0.1 a b c 0.25 O 1.8 6.8 0.2 2.54 T63ZA 1.3 0.1 a b c 1.3 0.1 a b c 6.8 0.2 c b a 6.8 0.2 O 1.8 c b a 2.54 2.54 1.3 0.1 3.7 1 0.1 T63ZB 6.8 0.2 c b a 6.8 0.2 O 1.8 2.54 2.54 5 max. 4 min. c b a 2.54 3.7 Revision: 09-Sep-16 Document Number: 51024 1 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T63 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 14 turns 2 10 to 2.2 M Resistance range Standard series and on request series E3 Tolerance 1 - 2 - 5 (1 - 2.2 - 4.7) Standard 10 % On request 5% Linear 0.25 W at 70 C Power rating POWER IN W 0.25 0 0 25 70 50 125 100 155 AMBIENT TEMPERATURE IN C Circuit diagram Temperature coefficient Limiting element voltage (linear law) Contact resistance variation End resistance (typical) a c (1) (3) cw b (2) See Standard Resistance Element table 250 V 2 % Rn or 2 1 Dielectric strength (RMS) 1000 V Insulation resistance (500 VDC) 106 M MECHANICAL SPECIFICATIONS Mechanical travel Operating torque (max. Ncm) End stop torque 15 turns 5 1.5 Clutch action Unit weight (max. g) 0.5 Wiper (actual travel) Positioned at approx. 50 % Terminals Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range Climatic category Sealing Revision: 09-Sep-16 -55 C to +155 C 55/125/56 Fully sealed - IP67 Document Number: 51024 2 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T63 www.vishay.com Vishay Sfernice PERFORMANCES TESTS CONDITIONS TYPICAL VALUES AND DRIFTS RT/RT R1-2/R1-2 OTHER Electrical endurance 1000 h at rated power 90'/30' - ambient temperature 70 C 1% 2% Contact res. variation: < 1 % Rn Climatic sequence Phase A dry heat 125 C - 30 % Pr Phase B damp heat Phase C cold -55 C Phase D damp heat 5 cycles 0.5 % 1% - 56 days 40 C, 93 % RH 0.5 % 1% Dielectric strength: 1000 VRMS Insulation resistance: > 104 M 5 cycles -55 C to +125 C 0.5 % - V1-2/V1-3 1 % 50 g at 11 ms 3 successive shocks in 3 directions 0.1 % 0.2 % - 10 Hz to 55 Hz 0.75 mm or 10 g during 6 h 0.1 % - V1-2/V1-3 0.2 % - Contact res. variation: < 1 % Rn Damp heat, steady state Rapid temperature change Shock Vibration Mechanical endurance 200 cycles (2 % + 3 ) Note * Nothing stated herein shall be construed as a guarantee of quality or durability. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. MAX. POWER WORKING AT 70 C VOLTAGE MAX. WIPER CURRENT TYPICAL TCR -55 C +125 C ppm/C W V mA 10 0.25 1.58 158 20 0.25 2.23 112 50 0.25 3.5 77 100 0.25 35 50 200 0.25 7.07 35 500 0.25 11.2 22 1K 0.25 15.8 15.8 2K 0.25 22.3 11.2 5K 0.25 35.3 7.1 10K 0.25 50 5 20K 0.25 70.7 3.5 25K 0.25 79 3.2 50K 0.25 112 2.2 100K 0.25 158 1.6 200K 0.25 224 1.1 250K 0.25 250 1.1 500K 0.13 250 0.5 1M 0.06 250 0.25 2.2M 0.03 250 0.125 Revision: 09-Sep-16 MARKING * * * * * * * Vishay trademark Model Style Ohmic value (in , k, M) Tolerance (in %) only if non standard Manufacturing date Marking of terminal 3 PACKAGING * In tube of 50 pieces code T20 (TU50) 100 Document Number: 51024 3 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T63 www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) T 6 3 X A 1 0 4 K T 2 0 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING T63 XA XB YA YB ZA ZB From 10 to 2.2 M 104 = 100 k K = 10 % on request J = 5 % T20 = tube 50 pieces SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T63 XA 100K 10 % MODEL STYLE VALUE TOLERANCE SPECIAL TU e3 PACKAGING LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 09-Sep-16 Document Number: 51024 4 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: T63YB200KT20 T63YB501KT20 T63YB503KT20 T63YB502KT20 T63XB 100K 10% T63XB 2K 10% T63XB 500K 10% T63YB 100 10% T63YB 1K 10% T63YB 25K 10% T63YB 50 10% T63YB102KT20 T63XB503KT20 T63YB104KT20 T63YB201KT20 T63YB254KT20 T63ZB502KT20 T63XB103KT20 T63XB201KT20 T63XB204KT20 T63XB502KT20 T63YB203KT20 T63YB105KT20 T63YB253KT20 T63XB500KT20 T63ZB504KT20 T63YB100KT20 T63YB204KT20 T63ZB103KT20 T63ZB203KT20 T63ZB105KT20 T63ZB201KT20 T63XB504KT20 T63YA502KT20 T63ZB202KT20 T63XB202KT20 T63YA104KT20 T63YB202KT20 T63XB254KT20 T63XB253KT20 T63YB101KT20 T63YB500KT20 T63ZB102KT20 T63YB504KT20 T63YB103KT20 T63XB101KT20 T63XB102KT20 T63XB501KT20 T63XB203KT20 T63YB 2M 10% T63XB100KT20 T63XB104KT20 T63XB105KT20 T63XB200KT20 T63YA102KT20 T63YA103KT20 T63YB205KT20 T63ZB100KT20 T63ZB101KT20 T63ZB104KT20 T63ZB200KT20 T63ZB204KT20 T63ZB253KT20 T63ZB254KT20 T63ZB500KT20 T63ZB501KT20 T63ZB503KT20 T63ZA200KT20 T63ZA104KT20 T63ZA500KT20