CHEMTRONICS TDS # CW8000 Technical Data Sheet CircuitWorks Flux Dispensing Pens PRODUCT DESCRIPTION CircuitWorks Flux Dispensing Pens are designed specifically to apply each type of flux with precision control. The Rosin Flux Dispensing Pen quickly applies a noncorrosive type R flux. This flux meets MIL-F-14256 E and F. The No Clean Flux Dispensing Pen precisely applies a patented noncorrosive, halide free, organic low solid no clean flux. This flux meets Bellcore TR-NWT-000078 and IPC SF-818 for surface insulation resistance. Marker pen dispenser provides controlled and exact application Minimize excess flux waste Completely portable package All fluxes are noncorrosive and halide free Excellent material compatibility Fast drying TYPICAL APPLICATIONS CircuitWorks Flux Dispensing Pens precisely dispense flux on: Printed Circuit Boards Chip Carriers Heat Sinks Surface Mount Device Pads Switches Sockets TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Rosin Flux Dispensing Pen Flux Type Rosin, Grade WW ANSI/IPC J-STD-004, Type ROL0 Flash Point (TCC) 54 F (12 C) Vapor Density (air=1) >1 Appearance Yellow Liquid Odor Alcohol No Clean Flux Dispensing Pen Flux Type Rosin, Grade WW ANSI/IPC J-STD-004, Type ROL0 Flash Point (TCC) 54 F (12 C) Vapor Density (air=1) >1 Appearance Slightly Yellow Liquid Odor Alcohol Shelf life RoHS Compliant 5 years COMPATIBILITY CircuitWorks Flux Dispensing Pens are generally compatible with most materials used in the electronics industry. As with any cleaning agent, material compatibility should be determined on a non-critical area prior to use. USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Hold pen vertically and briefly depress tip to start liquid flow. Rub pen tip on surface to be fluxed. Wipe tip on a ControlWipe dry wipe to remove buildup. Flux can be removed with Flux-Off(R) Rosin, or No Clean Plus. CAUTION: Product is Flammable - Do not use near sources of ignition and energized equipment. AVAILABILITY CW8100 CW8200 9 gm (0.32 oz) No Clean Flux Pen 9 gm (0.32 oz) Rosin Flux Pen CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. Chemtronics, Flux-Off and CircuitWorks are registered trademarks of Chemtronics. All rights reserved. ControlWipes is a trademark of Chemtronics. All rights reserved. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 REV. D (08/13) TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. DISTRIBUTED BY: