2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
28 Super Capacitors Vol.07
FG Series
The FG series includes small-size electric double-layer capacitors with excellent voltage holding characteristics.
The FG series are ideal as long-time backup devices for minute-current loads in small and lightweight systems.
Features
• The volume of the products is approx. 1/2 that of the FYD type products. (0.22F~2.2F)
• Added 4.7F/5.5V to series.
• Miniaturized 0.047F/5.5V and 0.10F/5.5V
Applications
• Backup of CMOS microprocessors, static RAMs, DTSs (digital tuning systems)
• Memory backup of remote controllers and handy cassette player during battery exchange
Part Number System
FG 0H 473 Z F
Environmental Impact Reduced Product
Capacitance tolerance:
Z: +80%, –20%
Capacitance: 0.047 F
First two digits represent significant figures.
Third digit specifies number of zeros to follow F code.
Maximum Operating voltage
0H: 5.5 VDC
Super Capacitor: FG series
μ
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 29
Max. Current at
30 minutes
(mA)
0.015
0.033
0.071
0.15
0.33
0.71
1.5
3.3
7.1
1.5
Markings
Dimensions
P±0.5
0.3 Min.
H Max.
d1±0.1
d2±0.1
D ±0.5
L Min.
Sleeve
Lead (case)
Negative polarity
Lead
φ
–
Part Number
FG0H103ZF
FG0H223ZF
FG0H473ZF
FG0H104ZF
FG0H224ZF
FG0H474ZF
FG0H105ZF
FG0H225ZF
FG0H475ZF
FG0V155ZF
Max.
Operating Voltage
(V)
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
3.5
Charge System
(F)
0.01
0.022
0.047
0.10
0.22
0.47
1.0
2.2
4.7
1.5
Max. ESR
(at 1 kHz)
(Ω)
300
200
200
100
100
120
65
35
35
65
Note: Weight is typical.
Part No.
FG0H103ZF
FG0H223ZF
FG0H473ZF
FG0H104ZF
FG0H224ZF
FG0H474ZF
FG0H105ZF
FG0H225ZF
FG0H475ZF
FG0V155ZF
D
11.0
(0.43)
11.0
(0.43)
11.0
(0.43)
11.0
(0.43)
13.0
(0.512)
14.5
(0.571)
16.5
(0.65)
21.5
(0.85)
28.5
(1.122)
16.5
(0.65)
H
5.5
(0.215)
5.5
(0.215)
5.5
(0.215)
6.5
(0.256)
9.0
(0.355)
18.0
(0.709)
19.0
(0.749)
19.0
(0.749)
22.0
(0.867)
14.0
(0.551)
P
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
5.08
(0.200)
7.62
(0.300)
10.16
(0.400)
5.08
(0.200)
d1
0.2
(0.016)
0.2
(0.016)
0.2
(0.016)
0.2
(0.016)
0.4
(0.016)
0.4
(0.016)
0.4
(0.016)
0.6
(0.024)
0.6
(0.024)
0.4
(0.016)
d2
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.4
(0.055)
1.2
(0.047)
Dimensions mm (inch)
Sleeve
Lead terminal
connected to the
metal can case
Negative polarity
Negative polarity
identification mark
Date code
–
Marking of sleeve
K1
5.5V
K1
001 FG
0.22F
5.5V
FG
0.22F
Super Capacitor
Super Capacitor
Weight
g (oz)
0.9
(0.032)
1.0
(0.035)
1.0
(0.035)
1.3
(0.046)
2.5
(0.088)
5.1
(0.180)
7.0
(0.247)
12.1
(0.427)
27.3
(0.964)
5.2
(0.185)
L
2.7
(0.106)
2.7
(0.106)
2.7
(0.106)
2.7
(0.106)
2.2
(0.087)
2.4
(0.095)
2.7
(0.106)
3.0
(0.118)
6.1
(0.240)
3.1
(0.122)
Voltage
Holding
Characteristic
Min.(V)
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
4.2
–
Discharge System
(F)
0.013
0.028
0.060
0.13
0.28
0.60
1.3
2.8
6.0
2.2
Nominal Capacitance
Standard Ratings
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
30 Super Capacitors Vol.07
Specifications: FG Series
Specifications
–25˚C to +70˚C
5.5 Vdc, 3.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of initial requirement
Current at 30 min.
Not to exceed 120% of initial requirement
Appearance
No obvious abnormality
Capacitance 50% or higher of initial value
Equivalent series resistance
4 or less times initial value
Capacitance 200% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
Appearance
No obvious abnormality
3 / 4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Capacitance Within ±20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current at 30 min.
1.2 or less times initial standard value
Appearance
No obvious abnormality
Capacitance Within ±30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current at 30 min.
Twice or less times initial standard value
Appearance
No obvious abnormality
Voltage between terminal leads higher than 4.2V
(3.5V Type: no standard)
Items
Operating Temperature Range
Maximum Operating Voltage.
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Solderability
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Voltage Holding Characteristics
(Self Discharge)
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 6.3V(5.5V products),
4.0V(3.5V products)
Temperature: 70±2˚C
Charge: 30 sec.
Discharge: 9 min 30 sec.
Number of cycles: 1000 cycles
Series resistance:
0.010F: 1500 Ω0.47F: 30 Ω
0.022F: 560 Ω1.0F: 15 Ω
0.047F: 300 Ω1.5F: 15 Ω
0.10F: 150 Ω2.2F: 10 Ω
0.22F: 56 Ω4.7F: 10 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2˚C
Phase 2: –25 ±2˚C
Phase 4: +25 ±2˚C
Phase 5: +70 ±2˚C
Phase 6: +25 ±2˚C
Conforms to 8.1.2 (1)
Conforms to 8.2.3 (1)
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245±5˚C
Dipping duration: 5±0.5 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 8.5
Solder temperature: 260±10˚C
Dipping duration: 10±1 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 9.3
Temperature: –25˚C → normal temperature
→ +70˚C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40±2˚C
Relative humidity: 90 to 95% RH
Test duration: 240 ±8hours
Conforms to 9.10
Temperature: 70±2˚C
Voltage applied: MAX. Operating Voltage
Series protection resistance: 0Ω
Test duration: 1000 hours
Voltage applied: 5.0VDC
(with case side terminal negative)
Series resistance: 0Ω
Charging time: 24 hours
Time: 24 hours
Temperature: Lower than 25
˚C
Humidity: Lower than 70%RH
Temperature
Variation of
Characteristics
Charging
Condition
Storage
+48
-0
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
Super Capacitors Vol.07 31
Dimensions
P±0.5
0.3 Min.
H Max.
d1±0.1
d2±0.1
D ±0.5
L Min.
Sleeve
Lead (case)
Negative polarity
Lead
φ
–
Note: Weight is typical.
● FGH Type
Part No.
FGH0H104ZF
FGH0H224ZF
FGH0H474ZF
FGH0H105ZF
D
11.0
11.0
16.5
21.5
H
5.5
7.0
8.0
9.5
P
5.08
5.08
5.08
7.62
d1
0.2
0.2
0.4
0.6
d2
1.2
1.2
1.2
1.2
Dimensions mm Weight
g
1.0
1.3
4.1
7.2
L
2.7
2.7
2.7
3.0
Max. Current at
30 minutes
(mA)
0.15
0.33
0.71
1.5
Part Number
FGH0H104ZF
FGH0H224ZF
FGH0H474ZF
FGH0H105ZF
Max.
Operating Voltage
(V)
5.5
5.5
5.5
5.5
Charge System
(F)
-
-
-
-
Max. ESR
(at 1 kHz)
(Ω)
100
100
65
35
Voltage
Holding
Characteristic
Min.(V)
4.2
4.2
4.2
4.2
Discharge System
(F)
0.10
0.22
0.47
1.0
Nominal Capacitance
Standard Ratings
2007.08.03P0862SUCA16VOL07E
●Allspecificationsinthiscatalogandproductionstatusofproductsaresubjecttochangewithoutnotice.Priortothepurchase,pleasecontactNECTOKINforupdatedproductdata.
●Pleaserequestforaspecificationsheetfordetailedproductdatapriortothepurchase.
●Beforeusingtheproductinthiscatalog,pleaseread"Precautions"andothersafetyprecautionslistedintheprintedversioncatalog.
32 Super Capacitors Vol.07
Specifications: FG Series FGH Type
Specifications
–25˚C to +70˚C
5.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90% of initial requirement
Equivalent series resistance
Not to exceed 120% of inital requirement
Current at 30 min.
Not to exceed 120% of inital requirement
Appearance
No obvious abnormality
Capacitance 50% or higher of initial value
Equivalent series resistance
4 or less times initial value
Capacitance 200% or below of initial value
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
1.5 CV (mA) or below
Capacitance Within ±20% of initial value
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Meet initial standard value
Current at 30 min.
Appearance
No obvious abnormality
3 / 4 or more of the pin surface should be covered with new solder
Capacitance
Equivalent series resistance
Should satisfy initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Capacitance
Equivalent series resistance
Satisfy initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Capacitance Within ±20% of initial value
Equivalent series resistance
1.2 or less times initial standard value
Current at 30 min.
1.2 or less times initial standard value
Appearance
No obvious abnormality
Capacitance Within ±30% of initial value
Equivalent series resistance
Twice or less times initial standard value
Current at 30 min.
Twice or less times initial standard value
Appearance
No obvious abnormality
Voltage between terminal leads higher than 4.2V
Items
Operating Temperature Range
Maximum Operating Voltage.
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
Surge Voltage
Phase 2
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Solderability
Solder Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Voltage Holding Characteristics
(Self Discharge)
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 6.3V
Temperature: 70±2˚C
Charge: 30 sec.
Discharge: 9 min 30 sec.
Number of cycles: 1000 cycles
Series resistance:
0.10F: 150 Ω
0.22F: 56 Ω
0.47F: 30 Ω
1.0F: 15 Ω
Discharge resistance: 0 Ω
Conforms to 7.12
Phase 1: +25 ±2˚C
Phase 2: –25 ±2˚C
Phase 4: +25 ±2˚C
Phase 5: +70 ±2˚C
Phase 6: +25 ±2˚C
Conforms to 8.1.2 (1)
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245±5˚C
Dipping duration: 5±0.5 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 8.5
Solder temperature: 260±10˚C
Dipping duration: 10±1 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 9.3
Temperature: –25˚C → normal temperature
→ +70˚C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40±2˚C
Relative humidity: 90 to 95% RH
Test duration: 240 ±8hours
Voltage applied: 5.0VDC
(with case side terminal negative)
Series resistance: 0Ω
Charging time: 24 hours
Time: 24 hours
Temperature: Lower than 25
˚C
Humidity: Lower than 70%RH
Temperature
Variation of
Characteristics
Charging
Condition
Storage
+48
-0
Conforms to 9.10
Temperature: 70±2˚C
Voltage applied: 5.5Vdc
Series protection resistance: 0Ω
Test duration: 1000 hours