To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0
January 2008
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25
Ω
Series Resistors
in the B Port Outputs
74LVT2245, 74LVTH2245
Low Voltage Octal Bidirectional Transceiver with
3-STATE Inputs/Outputs and 25
Ω
Series Resistors in the
B Port Outputs
Features
■
Input and output interface capability to systems at
5V V
CC
■
Equivalent 25
Ω
series resistor on B Port outputs
■
Bushold data inputs eliminate the need for external
pull-up resistors to hold unused inputs (74LVTH2245),
also available without bushold feature (74LVT2245)
■
Live insertion/extraction permitted
■
Power Up/Down high impedance provides glitch-free
bus loading
■
Outputs source/sink –12mA/+12mA on B Port,
–32mA/+64mA on A Port
■
Latch-up performance exceeds 500mA
■
ESD performance:
– Human-body model
>
2000V
– Machine model
>
200V
– Charged-device model
>
1000V
General Description
The LVT2245 and LVTH2245 contain eight non-inverting
bidirectional buffers with 3-STATE outputs and are
intended for bus-oriented applications. The Transmit/
Receive (T/R) input determines the direction of data flow
through the bidirectional transceiver. Transmit (active-
HIGH) enables data from A Ports to B Ports; Receive
(active-LOW) enables data from B Ports to A Ports. The
Output Enable input, when HIGH, disables both A and B
Ports by placing them in a high impedance state. The
equivalent 25
Ω
-series resistor in the B Port helps reduce
output overshoot and undershoot.
The LVTH2245 data inputs include bushold, eliminating
the need for external pull-up resistors to hold unused
inputs.
These transceivers are designed for low voltage (3.3V)
V
CC
applications, but with the capability to provide a TTL
interface to a 5V environment. The LVT2245 and
LVTH2245 are fabricated with an advanced BiCMOS
technology to achieve high speed operation similar to 5V
ABT while maintaining low power dissipation.
Ordering Information
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
Order Number
Package
Number Package Description
74LVT2245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
74LVT2245SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74LVT2245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
74LVTH2245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
74LVTH2245SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74LVTH2245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 2
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25
Ω
Series Resistors
in the B Port Outputs
Connection Diagram
Pin Description
Logic Symbols
IEEE/IEC
Truth Table
H
=
HIGH Voltage Level
L
=
LOW Voltage Level
X
=
Immaterial
Pin
Names
Description
OE Output Enable Input
T/R Transmit/Receive Input
A
0
–A
7
Side A Inputs or 3-STATE Outputs
B
0
–B
7
Side B Inputs or 3-STATE Outputs
Inputs
OutputsOE T/R
LLBus B Data to Bus A
LHBus A Data to Bus B
HXHIGH-Z State
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 3
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25
Ω
Series Resistors
in the B Port Outputs
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Note:
1. I
O
Absolute Maximum Rating must be observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol Parameter Rating
V
CC
Supply Voltage –0.5V to +4.6V
V
I
DC Input Voltage –0.5V to +7.0V
V
O
DC Output Voltage
Output in 3-STATE –0.5V to +7.0V
Output in HIGH or LOW State
(1)
–0.5V to +7.0V
I
IK
DC Input Diode Current, V
I
<
GND –50mA
I
OK
DC Output Diode Current, V
O
<
GND –50mA
I
O
DC Output Current, V
O
>
V
CC
Output at HIGH State 64mA
Output at LOW State 128mA
I
CC
DC Supply Current per Supply Pin ±64mA
I
GND
DC Ground Current per Ground Pin ±128mA
T
STG
Storage Temperature –65°C to +150°C
Symbol Parameter Min Max Units
V
CC
Supply Voltage 2.7 3.6 V
V
I
Input Voltage 0 5.5 V
I
OH
HIGH-Level Output Current A Port –32 mA
B Port –12
I
OL
LOW-Level Output Current A Port 64 mA
B Port 12
T
A
Free Air Operating Temperature –40 +85 °C
∆
t
/
∆
V Input Edge Rate, V
IN
=
0.8V–2.0V, V
CC
=
3.0V 0 10 ns/V
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 4
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25
Ω
Series Resistors
in the B Port Outputs
DC Electrical Characteristics
Notes:
2. Applies to Bushold versions only (74LVTH2245).
3. An external driver must source at least the specified current to switch from LOW-to-HIGH.
4. An external driver must sink at least the specified current to switch from HIGH-to-LOW.
5. This is the increase in supply current for each input that is at the specified voltage level rather than V
CC
or GND.
Symbol Parameter V
CC
(V) Conditions
T
A
=
–40°C to +85°C
UnitsMin. Max.
V
IK
Input Clamp Diode Voltage 2.7 I
I
=
–18mA –1.2 V
V
IH
Input HIGH Voltage 2.7–3.6 V
O
≤
0.1V or
V
O
≥
V
CC
– 0.1V
2.0 V
V
IL
Input LOW Voltage 2.7–3.6 0.8 V
V
OH
Output HIGH Voltage A Port 2.7 I
OH
=
–8mA 2.4 V
3.0 I
OH
=
–32mA 2.0
B Port 3.0 I
OH
=
–12mA 2.0
2.7–3.6 I
OH
=
–100µA V
CC
–0.2
V
OL
Output LOW Voltage A Port 2.7 I
OL
=
24mA 0.5 V
3.0 I
OL
=
16mA 0.4
3.0 I
OL
=
32mA 0.5
3.0 I
OL
=
64mA 0.55
B Port 3.0 I
OL
=
12mA 0.8
2.7 I
OL
=
100µA 0.2
I
I(HOLD)(2)
Bushold Input Minimum Drive 3.0 V
I
=
0.8V 75 µA
V
I
=
2.0V –75
I
I(OD)(2)
Bushold Input Over-Drive Current to
Change State
3.0
(3)
500 µA
(4)
–500
I
I
Input Current 3.6 V
I
=
5.5V 10 µA
Control Pins 3.6 V
I
=
0V or VCC ±1
Data Pins 3.6 VI = 0V –5
VI = VCC 1
IOFF Power Off Leakage Current 0 0V ≤ VI or VO ≤ 5.5V ±100 µA
IPU/PD Power Up/Down, 3-STATE Current 0–1.5 VO = 0.5V to 3.0V,
VI = GND or VCC
±100 µA
IOZL 3-STATE Output Leakage Current 3.6 VO = 0.5V –5 µA
IOZL(2) 3-STATE Output Leakage Current 3.6 VO = 0.0V –5 µA
IOZH 3-STATE Output Leakage Current 3.6 VO = 3.0V 5 µA
IOZH(2) 3-STATE Output Leakage Current 3.6 VO = 3.6V 5 µA
IOZH+ 3-STATE Output Leakage Current 3.6 VCC < VO ≤ 5.5V 10 µA
ICCH Power Supply Current 3.6 Outputs High 0.19 mA
ICCL Power Supply Current 3.6 Outputs Low 5 mA
ICCZ Power Supply Current 3.6 Outputs Disabled 0.19 mA
ICCZ+Power Supply Current 3.6 VCC ≤ VO ≤ 5.5V, Outputs
Disabled
0.19 mA
∆ICC Increase in Power Supply Current(5) 3.6 One Input at VCC – 0.6V,
Other Inputs at VCC or GND
0.2 mA
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 5
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors
in the B Port Outputs
Dynamic Switching Characteristics(6)
Notes:
6. Characterized in SOIC package. Guaranteed parameter, but not tested.
7. Max number of outputs defined as (n). n–1 data inputs are driven 0V to 3V. Output under test held LOW.
AC Electrical Characteristics
Note:
8. Skew is defined as the absolute value of the difference between the actual propagation delay for any two
separate outputs of the same device. The specification applies to any outputs switching in the same direction,
either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).
Capacitance(9)
Note:
9. Capacitance is measured at frequency f = 1MHz, per MIL-STD-883, Method 3012.
Symbol Parameter VCC (V)
Conditions TA = 25°C
UnitsCL = 50pF, RL = 500ΩMin. Typ. Max.
VOLP Quiet Output Maximum
Dynamic VOL
3.3 (7) 0.8 V
VOLV Quiet Output Minimum
Dynamic VOL
3.3 (7) –0.8 V
Symbol Parameter
TA = –40°C to +85°C,
CL = 50pF, RL = 500Ω
Units
VCC = 3.3V ± 0.3V VCC = 2.7V
Min. Max. Min. Max.
tPLH Propagation Delay Data to B Port Output 1.2 4.4 1.2 5.1 ns
tPHL 1.2 4.4 1.2 5.1
tPLH Propagation Delay Data to A Port Output 1.2 3.6 1.2 4.0 ns
tPHL 1.2 3.5 1.2 4.0
tPZH Output Enable Time for B Port Output 1.3 6.2 1.3 7.3 ns
tPZL 1.7 6.2 1.7 7.3
tPZH Output Enable Time for A Port Output 1.3 5.5 1.3 7.1 ns
tPZL 1.7 5.7 1.7 6.7
tPHZ Output Disable Time for B Port Output 2.0 5.9 2.0 6.5 ns
tPLZ 2.0 5.4 2.0 5.7
tPHZ Output Disable Time for A Port Output 2.0 5.9 2.0 6.5 ns
tPLZ 2.0 5.0 2.0 5.1
tOSHL, tOSLH A Port Output to Output Skew(8) 1.0 1.0 ns
tOSHL, tOSLH B Port Output to Output Skew(8) 1.0 1.0 ns
Symbol Parameter Conditions Typical Units
CIN Input Capacitance VCC = 0V, VI = 0V or VCC 4pF
CI/O Input/Output Capacitance VCC = 3.0V, VO = 0V or VCC 8pF
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 6
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors
in the B Port Outputs
Physical Dimensions
Figure 1. 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
0.10 C
C
A
SEE DETAIL A
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO JEDEC
MS-013, VARIATION AC, ISSUE E
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE MOLD
FLASH OR BURRS.
E) LANDPATTERN STANDARD: SOIC127P1030X265-20L
PIN ONE
INDICATOR
0.25
110
BC A
M
20 11
B
X 45°
8°
0°
SEATING PLANE
GAGE PLANE
DETAIL A
SCALE: 2:1
SEATING PLANE
LAND PATTERN RECOMMENDATION
F) DRAWING FILENAME: MKT-M20BREV3
0.65
1.27
2.25
9.50
13.00
12.60
11.43
7.60
7.40
10.65
10.00
0.51
0.35 1.27
2.65 MAX
0.30
0.10
0.33
0.20
0.75
0.25
(R0.10)
(R0.10)
1.27
0.40
(1.40)
0.25
D) CONFORMS TO ASME Y14.5M-1994
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 7
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors
in the B Port Outputs
Physical Dimensions (Continued)
Figure 2. 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 8
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors
in the B Port Outputs
Physical Dimensions (Continued)
Figure 3. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com
74LVT2245, 74LVTH2245 Rev. 1.5.0 9
TRADEMARKS
Thefollowing includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global
subsidiaries, and is not intended to be an exhaustive list of all such trademarks.
ACEx®
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EZSWITCH™ *
™
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter®*
FPS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP-SPM™
Power220®
POWEREDGE®
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™®
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
*EZSWITCH™ and FlashWriter®are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support,
device, or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary First Production
This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
No Identification Needed Full Production
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
the design.
Obsolete Not In Production
This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I33
74LVT2245, 74LVTH2245 — Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs and 25Ω Series Resistors
in the B Port Outputs
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
