DIPLOMAT Cases accessories FEATURE FRONT PANELS Available in addition to the range of standard 19" front panels, these are unique to the DIPLOMAT case. Manufactured in 3mm etched and anodised aluminium with a high quality surface finish they provide a clean and very attractive frontal appearance. They may be used both on the front and rear of the case and are fitted into the bezel in place of the trims, and in front of the 19" fixing facilities. Ordering information Case Size Height Width 1012" 3U 19" 1012" 4U 19" 6U 19" Panel dimensions Height Width 138,5 304 138,5 520 183 304 183 520 272 520 Order code 60-39272 60-39268 60-39273 60-39269 60-39270 Feature front panels 1012" AND 19" FRONT PANELS Standard 19" (IEC 297-1, DIN 41494 pt1) front panels are available in satin anodised aluminium of 3mm thickness. Ordering information Height 1U 2U 3U 4U 6U 9U 19" 1012" 19" 1012" 19" (482mm) (266,7mm) (482mm) (266,7mm) (482mm) Order code 50-0767 50-0763 50-0768 50-0764 50-0769 1012" 19" 19" 19" (266,7mm) (482mm) (482mm) (482mm) 50-0765 50-0770 50-0772 50-24284 Width 19" front panels FRONT BEZEL TRIMS These provide an attractive finish to the DIPLOMAT cases when the equipment has been installed. They are available in two versions; two-part highlighted and two-part plain. The highlighted versions are mounted from the front of the unit for easy access and supplied with the standard highlight colour (Pantone green). The plain version is mounted from the rear of the bezel, providing a clean fronted appearance and offering additional security. Ordering information Height 3U 4U 6U 9U Description Plain two part Colour two part Plain two part Colour two part Order code 760-236865 760-238510 760-236866 760-238511 Plain two part Colour two part Plain two part Colour two part 760-236867 760-238512 760-236868 760-238513 Front bezel trims 11