General Purpose Relays
Power Relays
T9A Series, DC Coil 30A PCB or Panel Mount Relay
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
Contact ratings 1) (continued)
Type Load Cycles
UL 508/873
AgSnOInO, 1W coil
NO 30A, 240VAC, general purpose 100x103
NO 80LRA/30FLA, 240VAC 30x103
NC 10A, 250VAC, resistive 50x103
AgCdO, 900mW coil
NO 30A, 240VAC, general purpose 100x103
NO 18A, 240VAC, resistive, 105°C 100x103
NC 15A, 240VAC, resistive 6x103
NO 30LRA/15FLA, 240VAC 100x103
NO 50LRA/16FLA, 120VAC 100x103
NO 30LRA/11FLA, 120VAC 200x103
1) Contact ratings at 25°C (unless otherwise noteed) with relay properly vented. Remove
vent nib after soldering and cleaning.
Mechanical endurance 10x106 ops.
Coil Data
Coil voltage range 5 to 110VDC
Max. coil power 110% of nominal
Max. coil temperature 155°C
Coil insulation system according UL Class F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% W
Code D (1W) coil
5 5 3.75 0.5 25 1
6 6 4.5 0.6 36 1
9 9 6.75 0.9 81 1
12 12 9 1.2 144 1
15 15 11.25 1.5 225 1
18 18 13.5 1.8 324 1
24 24 18 2.4 576 1
48 48 36 4.8 2304 1
110 110 82.5 11 12100 1
Code L (900mW) coil
5 5 3.75 0.5 27 .9
6 6 4.5 0.6 40 .9
9 9 6.75 0.9 97 .9
12 12 9 1.2 155 .9
15 15 11.25 1.5 256 .9
18 18 13.5 1.8 380 .9
24 24 18 2.4 660 .9
48 48 36 4.8 2560 .9
110 110 82.5 11 13450 .9
All figures are given for coil without preenergization, at ambient temperature +23°C.
n 30A switching in 1 form A (NO) and 20A in 1 form C (CO)
n Plastic sealed case available
n Meets UL 508 and 873 spacing - 3.18mm through air, 6.36mm over
surface
n Option for load connections via 0.250”” (6.35mm) Q.C. terminals
n UL class F insulation system standard
Typical applications
HVAC, Appliances, Industrial Controls
Approvals
UL E58304; CSA LR48471
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A (NO), 1 form B (NC), 1 form C (CO)
Rated voltage 277VAC
Max. switching voltage 277VAC
Rated current 30A 15A 20A/10A
Limiting continuous current 30A
Contact material AgSnOInO, AgCdO
Min. recommended contact load 1A, 5VDC or 12VAC
Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC
Frequency of operation, with/without load 360/3600hr
Operate/release time max., including bounce 15/15ms
Contact ratings 1)
Type Load Cycles
Factory
AgCdO, 1W coil
NO 30A, 240VAC, general purpose 100x103
NO 25A, 240VAC, resistive 100x103
CO 20A/10A, 240VAC, general purpose 100x103
CO 20A/10A, 240VAC, resistive 100x103
CO 20A/10A, 28VDC, resistive 100x103
UL 508/873
AgCdO, 1W coil
NO 30A, 240VAC, general purpose 100x103
NC 15A, 240VAC, general purpose 100x103
CO 20A/10A, 240VAC, general purpose 100x103
NO 25A, 240VAC, resistive 6x103
NC 20A, 240VAC, resistive 6x103
CO 16.75A/13.4A, 240VAC, resistive 6x103
NO 80LRA/30FLA, 240VAC 30x103
NC 30LRA/12FLA, 240VAC 30x103
CO 53.6LRA/20FLA / 20LRA/8FLA, 240VAC 30x103
NO 98LRA/22FLA, 120VAC 100x103
NO 2HP, 240VAC 1x103
NC 1/2HP, 240VAC 1x103
NO 1HP, 125VAC 1x103
NC 1/4HP, 125VAC 1x103
NO 10A, 277VAC, ballast 6x103
NC 3A, 277VAC, ballast 6x103
NO 8.3A, 120VAC, tungsten 6x103
NO 5.4A, 277VAC, tungsten 6x103
NO 470VA, 120VAC, pilot duty 30x103
NO 20A, 28VDC, resistive 100x103
NC 10A, 28VDC, resistive 100x103
1) Contact ratings at 25°C (unless otherwise noteed) with relay properly vented. Remove
vent nib after soldering and cleaning.
General Purpose Relays
Power Relays
T9A Series, DC Coil 30A PCB or Panel Mount Relay (Continued)
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
Potter & Brumfield
Insulation Data
Initial dielectric strength
between open contacts 1500Vrms
between contact and coil 2500Vrms
Initial surge withstand voltage
between contact and coil 6kV
Initial insulation resistance
between insulated elements 1x109Ω
Clearance/creepage
between contact and coil 3.18mm clearance/6.3638mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil -55ºC to 85ºC 3)
105°C models available
Category of environmental protection
IEC 61810 RT0 - open, RTI - dust protected,
RTII - flux proof, RTIII - wash tight
Vibration resistance (functional) 1.65mm max excursions, 10-55 Hz
Shock resistance (functional) 10g for 11msec
Shock resistance (destructive) 100g
Terminal type pcb-tht and pcb-tht + quick connect
Weight 26g mounting code 1
33g mounting codes 2 and 5
Resistance to soldering heat THT
IEC 60068-2-20 250°C
Packaging/unit tray/50 pcs., bundle/250 pcs., box/500 pcs.
3) Operating ambient temperature must consider “Must Operate Voltage Change Over
Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to
cool) and Maximum Coil Temperature. Specification ambient considers 20A load with
coil cooled to ambient.
Coil Data (continued)
Ambient temperature vs. coil voltage – 1W coil
Data below are average values and should be verified in application. Tests
were conducted within a 2’ (.6 m) cube (still air); at nominal coil power @
25°C; with normally open contact loaded; and with 4’ (1.22 m) long, #10
AWG load wires. P.C. board relays were mounted to a 30A, single side P.C.
board. Coil rise test conducted with a 30A PC board to maintain 20°C max.
rize at 30°C. The relay connections and wiring must be designed with an
adequate cross section to ensure proper current flow and heat dissipation.
2) Remove knock-off nib after cleaning process for optimum life of wash-tight relays.
0
20
40
60
80
100
120
140
1801601401201008060
Wash-Tight Relay, Vented (2,
Load Connections Via Q.C. Terminals,
PC Mount
0A
10A
20A
30A
Applied Coil Voltage (% of Rated Voltage)
Max. Alowable
Ambient Temp. (C)
40
60
80
100
120
140
1801601401201008060
Dust Protected Relay,
Flange Mount
0A
10A
20A
30A
Applied Coil Voltage (% of Rated Voltage)
Max. Alowable
Ambient Temp. (C)
0
20
40
60
80
100
120
140
1801601401201008060
0A
10A
20A
30A
Wash-Tight Relay, Vented (2
PC Terminals For Coil & Contacts
Applied Coil Voltage (% of Rated Voltage)
Max. Alowable
Ambient Temp. (C)
Dimensions
T9AS – Mounting and termination code 2 T9AP – Mounting and termination code 5
.032 x .062
(.81 x 1.57)
.045 x .045
(1.14 x 1.14)
.03
(.80)
2 PLACES
.250 x .032 QUICK
(6.35 x .81) CONNECT
NC NO
COM
1.280 MAX.
(32.51)
1.080 MAX.
(27.43)
.130 .020
(3.30 .51)
1.100 MAX.
(27.94)
Ø
.187 x .020
(4.75 x .508)
QUICK
CONNECT
1.080 MAX.
(27.43)
1.980 MAX.
(50.29)
1.713 ± .010
(43.51 ± .25)
.071 (1.80) RAD. FOR #6 SCREW
1.280 MAX.
(32.51)
1.100 MAX.
(27.94)
.250 x .032
(6.35 x .81)
QUICK
CONNECT
NC NO
COM
Note: Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used.
General Purpose Relays
Power Relays
T9A Series, DC Coil 30A PCB or Panel Mount Relay (Continued)
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
Potter & Brumfield
Terminal assignment
Bottom view on pins
1 Form A 1 Form B 1 Form C
Product code structure Typical product code T9A S 5 D 2 2 -12
Type
T9A Power PCB or panel mount relay T9A
Enclosure
N Open, no enclosure (requires mounting code 1)
P Dust protected plastic case (requires mounting code 5)
S Wash-tight plastic case with knock off nib (requires mounting code 1 or 2)
V Flux-proof plastic case (requires mounting code 1 or 2)
Contact arrangement
1 1 form A (1 NO) 2 1 form B (1 NC) 5 1 form C (1 CO)
Coil Input
D DC voltage, 1W L DC voltage, 900mW
Mounting and termination
1 PCB mounting; PCB terminals for coil and contacts (only available with enclosure code N, S or V)
2 PCB mounting; PCB term. for coil and contacts; 6.35mm (.250in) QC for contacts (only available with enclosure code S or V)
5 Flanged mounting; 4.75mm (.187) QC for coil; 6.35mm (.250in) QC for contacts (only available with enclosure code P)
Contact material
2 AgCdO 4 AgSnOInO
Coil voltage
Coil code: please refer to coil versions table
Dimensions
Plain case Bracket mount case
.032 x .062
(.8 x 1.6)
TERMINALS
.212 MAX.
(5.38)
.10 MAX.
(2.54)
.045 x .045
(1.14 x 1.14)
TERMINAL
.805 MAX.
(20.4)
.69
(17.6)
1.280 MAX.
(32.51)
1.08 MAX.
(27.43)
.50
(12.8)
.03
(.80)
TERMINALS
.130 + .016
– .010
3.30 + .41
–.25
()
Ø
.016
(.43)
.950 MAX.
(24.13)
1.20 MAX.
(30.5)
.680 MAX.
(17.27)
.130 ± .020
(3.3 ± .51)
.045 x .045
(1.14 x 1.14)
TERMINAL
.032 x .062
(.8 x 1.6)
TERMINALS
.03
(0.80)
TERMINALS
Ø
PCB layout
Bottom view on pins
T9AP/S - Mounting and termination code 2 T9AS/V - Mounting and termination code 1
.140 MAX.
(3.56) .250 MAX.
(6.35)
.300
(7.62)
.100
(2.54)
.150
(3.81)
.500
(12.7)
.550
(13.97)
.700
(17.78)
.043 ± .003 DIA.
(1.09 ± .08)
.081 ± .005 DIA.
(2.06 ± .13)
.600
(15.24)
.078 ± .003 DIA.
(1.98 ± .08)
.300
(7.62)
.100
(2.54)
.150
(3.81)
.500
(12.7)
.550
(13.97) .700
(17.78)
.043 ± .003 DIA.
(1.09 ± .08)
.081 ± .005 DIA.
(2.06 ± .13)
.600
(15.24)
.212 MAX.
(5.38)
.078 ± .003 DIA.
(1.98 ± .08)
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
Only necessary terminals are
present on single throw models.
Consequently, some holes will
be unnecessary for single throw
models.
General Purpose Relays
Power Relays
T9A Series, DC Coil 30A PCB or Panel Mount Relay (Continued)
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
4
Potter & Brumfield
Product Code Enclosure Contacts Coil Mounting Contact Material Coil Part Number
T9AN1L22-24 Open (no cover) 1 form A, 1 NO 900mW pcb + QC AgCdO 24VDC 1419104-6
T9AN5L12-24 1 form C, 1 CO pcb terminals 1-1393210-0
T9AN5L22-24 pcb + QC 1419104-9
T9AP1D52-12 Unsealed, plastic dust cover 1 form A, 1 NO 1W Flanged mount, QC 12VDC 6-1419102-0
T9AP1D52-24 24VDC 6-1419102-3
T9AP1D52-48 48VDC 5-1419102-8
T9AP1D54-24 AgSnOInO 24VDC 7-1423091-3
T9AP5D52-12 1 form C, 1 CO AgCdO 12VDC 5-1419102-4
T9AP5D52-24 24VDC 5-1419102-2
T9AP5D52-48 48VDC 6-1419102-4
T9AP5D54-12 AgSnOInO 12VDC 7-1423091-4
T9AP5D54-24 24VDC 7-1423091-5
T9AS1D12-5 Wash tight, knock off nib 1 form A, 1 NO pcb terminals AgCdO 5VDC 2-1393210-0
T9AS1D12-9 9VDC 2-1393210-2
T9AS1D12-12 12VDC 1-1393210-3
T9AS1D12-15 15VDC 1-1393210-4
T9AS1D12-18 18VDC 1-1393210-5
T9AS1D12-24 24VDC 1-1393210-8
T9AS1D12-48 48VDC 1-1393210-9
T9AS1D12-110 110VDC 1-1393210-2
T9AS1D14-12 AgSnOInO 12VDC 5-1423091-7
T9AS1D14-24 24VDC 6-1423091-3
T9AS1D22-5 pcb + QC AgCdO 5VDC 2-1419104-3
T9AS1D22-12 12VDC 1-1419104-7
T9AS1D22-24 24VDC 2-1419104-1
T9AS1D22-48 48VDC 2-1419104-2
T9AS1D22-110 110VDC 1-1419104-6
T9AS1L12-12 900mW pcb terminals 12VDC 2-1393210-4
T9AS1L12-24 24VDC 2-1393210-5
T9AS1L22-18 pcb + QC 18VDC 2-1419104-6
T9AS2L22-24 1 form B, 1 NC 24VDC 1423794-1
T9AS5D12-5 1 form C, 1 CO 1W pcb terminals 5VDC 3-1393210-9
T9AS5D12-12 12VDC 3-1393210-3
T9AS5D12-18 18VDC 3-1393210-4
T9AS5D12-24 24VDC 3-1393210-7
T9AS5D12-48 48VDC 3-1393210-8
T9AS5D12-110 110VDC 3-1393210-2
T9AS5D14-5 AgSnOInO 5VDC 6-1423091-4
T9AS5D22-5 pcb + QC AgCdO 3-1419104-9
T9AS5D22-12 12VDC 3-1419104-3
T9AS5D22-24 24VDC 3-1419104-6
T9AS5D22-110 110VDC 3-1419104-2
T9AS5D24-5 AgSnOInO 5VDC 6-1423091-9
T9AS5D24-12 12VDC 7-1423091-0
T9AS5D24-24 24VDC 7-1423091-1
T9AS5L12-12 900mW pcb terminals AgCdO 12VDC 4-1393210-1
T9AS5L22-18 pcb + QC 18VDC 4-1419104-0
T9AS5L22-24 24VDC 4-1419104-1
T9AS5L22-48 48VDC 9-1419136-6
T9AV1D12-12 Vented, flux tight 1 form A, 1 NO 1W pcb terminals 12VDC 4-1393210-3
T9AV1D12-18 18VDC 5-1393210-2
T9AV1D22-18 pcb + QC 4-1419148-8
T9AV1D22-24 24VDC 5-1419148-0
T9AV1D22-48 48VDC 2-1423091-3
T9AV1L12-12 900mW pcb terminals 12VDC 1-1423091-8
T9AV1L22-24 pcb + QC 24VDC 4-1419104-2
T9AV2D22-24 1 form B, 1NC 1W 1419137-1
T9AV5D12-24 1 form C, 1CO pcb terminals 4-1393210-8
T9AV5D22-18 pcb + QC 18VDC 5-1419148-2
T9AV5D22-24 24VDC 1419137-2
T9AV5L12-12 900mW pcb terminals 12VDC 1423091-6
