SCHRACK General Purpose Relays Miniature Power PCB Relay PB n 1pole 10 A, 1 CO or 1 NO contact n Environmentally-friendly cadmium-free contacts n Class F coil system standard n Compact and simple design gives high process security n Product in accordance to IEC60335-1 Applications White goods, small home appliances, heating temperature controllers F0224-C Approvals V REG.-Nr. 121560, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated voltage / max. switching voltage AC Rated current Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% Contact material Rated frequency of operation with / without load Operate- / release time Bounce time NO / NC contact Contact ratings Type IEC 61810 PB114; PB113 PB114 PB134; PB133 PB134 PB634 PB634 UL 508 PB1x4 Contact Load NO/NC NO of CO NO NO NO NO NO 1 CO or 1 NO contact single contact micro-disconnection 250 / 400 VAC 10 A 2500 VA 15 A AgNi 90/10, AgSnO2 6/600 min-1 max 10 / 20 ms max 10 / 15 ms Ambient temp. [C] Cycles 10 A/3 A, 250 VAC, cos=1 10 A, 250 VAC, cos=1 10 A, 250 VAC, cos=1 6.5 A, 440 VAC, cos=1 8.5 A, 250 VAC, cos=1 10 A, 250 VAC, cos=1 85C 85C 85C 85C 85C 85C 30x103 30x103 20x103 50x103 100x103 60x103 10 A, 250 VAC, cos=1 85C 20x103 Coil data PB1.. Rated coil voltage range DC coil Operative range to IEC 61810 Coil versions, DC-coil Coil Rated Operate code voltage voltage VDC VDC Coil versions, DC-coil, 360mW 005 5 3.75 006 6 4.5 009 9 6.75 012 12 9.0 018 18 13.5 022 22 16.5 024 24 18.0 048 48 36 PB5.., PB6.. 5...48 VDC 5...24 VDC 2 Release voltage VDC 0.5 0.6 0.9 1.2 1.8 2.2 2.4 4.8 Coil resistance Ohm Rated coil power mW 70+10% 100+10% 225+10% 400+10% 900+10% 1344+10% 1600+10% 6400+10% 357 360 360 360 360 360 360 360 1 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Miniature Power PCB Relay PB (Continued) Coil versions, DC-coil, 500mW 005 5 3. 75 0.5 48+10% 521 006 6 4.5 0.6 69+10% 522 012 12 9 1.2 274+10% 526 024 24 18 2.4 1097+10% 525 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request PCB layout1) / terminal assignment Bottom view on solder pins Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit CO version NO version Material group of insulation parts Tracking index of relay base Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree 3 Rated voltage system 240 V Overvoltage category Other data 2500 Vrms 1000 Vrms W 3/4 mm W 4/5 mm IIIa PTI 250 S0407-AA S0407-AB basic micro disconnection 250 V 2 230 / 400 V S0407-AC III PB1.., PB6.. PB5.. Mechanical endurance 5x106 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0346 Resistance to heat and fire, version PB1, PB5 according EN60335, par.30 Environment Ambient temperature range -40...85C Vibration resistance (function) NO / NC cont. >10 / 4g >10/6g 30...400Hz 30...400Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof Procesing Mounting pcb Resistance to soldering heat 270C / 10s Relay weight 5.4 g Packaging unit 35/1050 pcs 1) Layout note: No openings (e.g. holes, slots, cutouts, unused pins, open through connections, etc.) allowed under the relay base. The relay base must be fully covered by the pcb, recommended minimum distance between the relay and the edge of the printed circuit board is 5 mm. For more information, please contact our application support. Dimensions S0406-A 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Miniature Power PCB Relay PB (Continued) Product key Typical product key PB 1 1 4 012 Type PB Miniature Power PCB Relay PB Version 1 standard version 5 500 mW version Contact configuration 1 1 CO contact (1 form C) Contact material 3 AgSnO2 Coil Coil code: please refer to coil versions table Other types on request Product key PB114005 PB114006 PB114012 PB114024 PB134005 PB134006 PB134012 PB134024 PB514012 PB514024 PB634005 PB634006 PB634012 PB634024 Version standard class F 6 high performance version (NO version only) 3 1 NO contact (1 form A) 4 AgNi 90/10 Contacts 1 CO contact Contact material AgNi 90/10 1 NO contact 500 mW version high performance version 1 CO contact 1 NO contact Coil 5 VDC 6 VDC 12 VDC 24 VDC 5 VDC 6 VDC 12 VDC 24 VDC 12 VDC 24 VDC 5 VDC 6 VDC 12 VDC 24 VDC Part number 6-1415029-1 7-1415029-1 8-1415029-1 9-1415029-1 1415030-1 1-1415030-1 2-1415030-1 3-1415030-1 2-1415538-5 5-1415535-6 3-1415541-8 3-1415541-9 4-1415541-1 4-1415541-2 3 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change.