Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
1
Miniature Power PCB Relay PB
n1pole 10 A, 1 CO or 1 NO contact
nEnvironmentally-friendly cadmium-free contacts
nClass F coil system standard
nCompact and simple design gives high process security
nProduct in accordance to IEC60335-1
Applications
White goods, small home appliances, heating temperature
controllers
F0224-C
Approvals
VREG.-Nr. 121560, ZE214025
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1 NO contact
Contact set single contact
Type of interruption micro-disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 10 A
Maximum breaking capacity AC 2500 VA
Limiting making capacity, max 4 s, duty factor 10% 15 A
Contact material AgNi 90/10, AgSnO2
Rated frequency of operation with / without load 6/600 min-1
Operate- / release time max 10 / 20 ms
Bounce time NO / NC contact max 10 / 15 ms
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
PB114; PB113 NO/NC 10 A/3 A, 250 VAC, cosϕ=1 85°C 30x103
PB114 NO of CO 10 A, 250 VAC, cosϕ=1 85°C 30x103
PB134; PB133 NO 10 A, 250 VAC, cosϕ=1 85°C 20x103
PB134 NO 6.5 A, 440 VAC, cosϕ=1 85°C 50x103
PB634 NO 8.5 A, 250 VAC, cosϕ=1 85°C 100x103
PB634 NO 10 A, 250 VAC, cosϕ=1 85°C 60x103
UL 508
PB1x4 NO 10 A, 250 VAC, cosϕ=1 85°C 20x103
Coil data PB1.. PB5.., PB6..
Rated coil voltage range DC coil 5...48 VDC 5...24 VDC
Operative range to IEC 61810 2
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
Coil versions, DC-coil, 360mW
005 5 3.75 0.5 70+10% 357
006 6 4.5 0.6 100+10% 360
009 9 6.75 0.9 225+10% 360
012 12 9.0 1.2 400+10% 360
018 18 13.5 1.8 900+10% 360
022 22 16.5 2.2 1344+10% 360
024 24 18.0 2.4 1600+10% 360
048 48 36 4.8 6400+10% 360
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
2
SCHRACK
Miniature Power PCB Relay PB (Continued)
Coil versions, DC-coil, 500mW
005 5 3. 75 0.5 48+10% 521
006 6 4.5 0.6 69+10% 522
012 12 9 1.2 274+10% 526
024 24 18 2.4 1097+10% 525
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Insulation
Dielectric strength coil-contact circuit 2500 Vrms
open contact circuit 1000 Vrms
Clearance / creepage coil-contact circuit CO version W3/4 mm
NO version W4/5 mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250
Insulation to IEC 61810-1
Type of insulation coil-contact circuit basic
open contact circuit micro disconnection
Rated insulation voltage 250 V
Pollution degree 3 2
Rated voltage system 240 V 230 / 400 V
Overvoltage category III
Other data PB1.., PB6.. PB5..
Mechanical endurance 5x106cycles
Material
RoHS - Directive 2002/95/EC compliant as per product date code 0346
Resistance to heat and fire, version PB1, PB5 according EN60335, par.30
Environment
Ambient temperature range -40...85°C
Vibration resistance (function) NO / NC cont.
>10 / 4g >10/6g
30...400Hz 30...400Hz
Shock resistance (destruction) 100 g
Category of protection RTII - flux proof
Procesing
Mounting pcb
Resistance to soldering heat 270°C / 10s
Relay weight 5.4 g
Packaging unit 35/1050 pcs
PCB layout1) / terminal assignment
Bottom view on solder pins
Dimensions
S0407-AA
S0407-AB
S0406-A
S0407-AC
1) Layout note:
No openings (e.g. holes, slots, cut outs,
unused pins, open through connections,
etc.) allowed under the relay base. The
relay base must be fully covered by the
pcb, recommended minimum distance
between the relay and the edge of the
printed circuit board is 5 mm.
For more information, please contact our
application support.
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
3
Miniature Power PCB Relay PB (Continued)
Product key Typical product key PB114012
Type
PB Miniature Power PCB Relay PB
Version
1standard version 6high performance version (NO version only)
5500 mW version
Contact configuration
11 CO contact (1 form C) 31 NO contact (1 form A)
Contact material
3AgSnO24AgNi 90/10
Coil
Coil code: please refer to coil versions table
Other types on request
Product key Version Contacts Contact material Coil Part number
PB114005 standard 1 CO contact AgNi 90/10 5 VDC 6-1415029-1
PB114006 class F 6 VDC 7-1415029-1
PB114012 12 VDC 8-1415029-1
PB114024 24 VDC 9-1415029-1
PB134005 1 NO contact 5 VDC 1415030-1
PB134006 6 VDC 1-1415030-1
PB134012 12 VDC 2-1415030-1
PB134024 24 VDC 3-1415030-1
PB514012 500 mW 1 CO contact 12 VDC 2-1415538-5
PB514024 version 24 VDC 5-1415535-6
PB634005 high 1 NO contact 5 VDC 3-1415541-8
PB634006 performance 6 VDC 3-1415541-9
PB634012 version 12 VDC 4-1415541-1
PB634024 24 VDC 4-1415541-2