RV www.vishay.com CECC ( Vishay Sfernice ) 40401-010 Qualified Thin Film Resistor Chip FEATURES * Nickel barrier for high temperature operating conditions * Tight TCR < 10 ppm/C, and in lot tracking < 5 ppm/C in (- 55 C, + 155 C temperature range) * Very low noise < 35 dB and voltage coefficient 0.1 ppm/V * Non-inductive * Laser trimmed down to 0.1 % * Wraparound resistance less than 0.01 Utilizing proven expertise in Thin Film resistors, VISHAY provides a CECC qualified chip with the same reliability and stability found in QPL resistors. These chips are available in a wide range of sizes, values and performance characteristics. * Antistatic waffle-pack or tape and reel packaging available * High stability (0.05 % - 1000 h at Pn at + 70 C) * Lead (Pb)-free available * Withstand moisture resistance test of AEC-Q200 CONSTRUCTION Passivation * Conform to EN 140401 804 Passivated NiCr resistance film * Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply Solder coating Nickel barrier TYPICAL PERFORMANCE High purity alumina substrate Adhesion layer ABS TCR 10 ppm/C ABS TOL. 0.1 % STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS MODEL E: 25 ppm/C Y: 10 ppm/C Absolute TCR Absolute tolerance - 55 C to + 155 C 0.1 %, 0.5 %, 1 %, 2 %, 5 % (R 500 ) 0.5 %, 1 %, 2 %, 5 % (R 100 ) Voltage coefficient 0.1 ppm/V Operating temperature range - 55 C to + 155 C Storage temperature range - 55 C to + 155 C Noise - 35 dB typical Thermal EMF < 0.1 V/C Load life stability CASE SIZES Resistance range CONDITIONS RV (2) Power rating Pn Limiting voltage (UL) (0.1 % Rn (1) 0.05 ) 1000 h Pn at + 70 C 0505, 0603 0805 1206 100 to 260 k 100 to 300 k 100 to 1 M 125 mW 200 mW 330 mW 50 V 50 V 75 V Notes (1) Rn: Nominal resistance (2) Extended resistance range on request Revision: 08-Feb-12 Document Number: 60022 1 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RV www.vishay.com Vishay Sfernice DIMENSIONS in millimeters (inches) A D D B C E E SERIES/ CASE SIZES A B D/E C Min. Max. Min. Max. Min. Max. Min. Max. RV 0505 1.198 (0.047) 1.502 (0.059) 1.143 (0.045) 1.397 (0.055) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) RV 0603 1.368 (0.054) 1.672 (0.066) 0.623 (0.025) 0.877 (0.035) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) RV 0805 1.758 (0.069) 2.062 (0.081) 1.143 (0.045) 1.397 (0.055) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) RV 1206 2.908 (0.114) 3.212 (0.126) 1.473 (0.058) 1.727 (0.068) 0.250 (0.010) 0.510 (0.020) 0.373 (0.015) 0.627 (0.025) POPULAR OPTION Option: AEC-Q200 moisture resistance Option to order: 0058: Specific production process to withstand 85 C/85 % RH at Pn/10 ENVIRONMENTAL TEST TEST Overload CECC REQUIREMENTS TYPICAL PERFORMANCE 6.25 x rated power/2 s (or 2 UL) 0.05 % Rn (2) + 0.05 0.01 % Rn (2) - 55/+ 155 C 5 moisture cycles 0.1 % Rn (2) + 0.05 0.02 % Rn (2) - 55/+ 155 C 5 cycles 30 min 0.05 % Rn (2) + 0.05 0.02 % Rn (2) + 70 C/Pn 1000 h 0.1 % Rn (2) + 0.05 0.05 % Rn (2) + 260 C/10 s 0.05 % Rn (2) + 0.05 0.02 % Rn (2) + 40 C/93 % HR Pn/10 0.1 % Rn (2) + 0.05 0.01 % Rn (2) AEC-Q200 (3) 85 C/85 % RH/Pn/10 1000 h 0.5 % + 0.05 Max. < 0.3 % + 0.05 1000 h at + 155 C 0.1 % Rn (2) + 0.05 0.05 % Rn (2) + 0.05 0.02 % Rn (2) Climatic sequences (1) Thermal shock (1) Load life (1) Resistance to solder heat Moisture resistance (1) High temperature storage Bending VALUES AND DRIFTS (R/R %) CONDITIONS (1) 10 bends/2 mm/5 s 0.05 % Rn (2) SPECIFIC CONDITIONS DUE TO TERMINATION TYPE TEST Solderability High T reflow profile CONDITIONS VALUES AND DRIFTS B; G N + 235 C/2 s Sn60Pb40 alloy + 245 C/3 s Sn97Ag3 alloy N/A + 255 C/40 s (on parts) VISHAY REQUIREMENTS TYPICAL PERFORMANCE VISUAL INSPECTION 0.02 % Rn (2) + 0.05 0.01 % Rn (2) + 0.05 Notes (1) Test requiring parts to be mounted on PCB will be performed with the requirement that termination alloy will be the same as solder paste alloy. Gold termination will be tested as B termination (2) Rn: Nominal Resistance Pn: Nominal Power (3) Option to order: 0058 Revision: 08-Feb-12 Document Number: 60022 2 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RV www.vishay.com Vishay Sfernice DERATING CURVE Rated Power (%) PACKAGING INFORMATION NUMBER OF PIECES PER PACKAGE SIZE TAPE AND REEL WAFFLE PACK (2" x 2") 0505 Min. TAPE WIDTH Max. 400 0603 100 0805 100 1206 140 4000 100 80 60 40 8 mm (0.315") 20 0 0 20 40 60 70 80 100 120 140 155 125 Ambient Temperature in C MECHANICAL SPECIFICATIONS Resistive material Nichrome Substrate material Alumina Plating Tin lead over nickel or tin silver over nickel or gold over nickel Marking resistance to solvents Per CECC Specs GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RV0505E1001DBT1016 R V GLOBAL MODEL 0 5 0 5 E 1 0 0 1 D B T 1 0 1 6 SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION 0505 0603 0805 1206 E = 25 ppm/C Y = 10 ppm/C The first 3 digits (2 digits are enough for tolerance G and J) are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point B = 0.1 % D = 0.5 % F=1% G=2% J=5% B: SnPb over nickel barrier N: SnAg over nickel barrier G: Gold over nickel barrier Blank = Waffle pack T= Tape and reel Leave blank if no option B: Lead bearing version N and G: Lead (Pb)-free/RoHS version 10R0 = 10 3901 = 3900 1004 = 1 M Historical Part Number example: RV 0505 25PPM 1K 0.5 % B TR R1016 PART NUMBER DESCRIPTION (for information only) RV 0505 25 PPM 1K 0.5 % B TR R1016 MODEL SIZE TCR OHMIC VALUE TOLERANCE TERMINATION PACKAGING OPTION Revision: 08-Feb-12 Document Number: 60022 3 For technical questions, contact: sfer@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000