RV
www.vishay.com Vishay Sfernice
Revision: 08-Feb-12 1Document Number: 60022
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CECC ( ) 40401-010 Qualified Thin Film Resistor Chip
Utilizing proven expertise in Thin Film resistors, VISHAY
provides a CECC qualified chip with the same reliability
and stability found in QPL resistors. These chips are
available in a wide range of sizes, values and performance
characteristics.
CONSTRUCTION
FEATURES
• Nickel barrier for high temperature operating
conditions
• Tight TCR < 10 ppm/°C, and in lot tracking
< 5 ppm/°C in (- 55 °C, + 155 °C temperature
range)
• Very low noise < 35 dB and voltage coefficient 0.1 ppm/V
• Non-inductive
• Laser trimmed down to 0.1 %
• Wraparound resistance less than 0.01
• Antistatic waffle-pack or tape and reel packaging
available
• High stability (0.05 % - 1000 h at Pn at + 70 °C)
• Lead (Pb)-free available
• Withstand moisture resistance test of AEC-Q200
• Conform to EN 140401 804
• Compliant to RoHS Directive 2002/95/EC
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
TYPICAL PERFORMANCE
Notes
(1) Rn: Nominal resistance
(2) Extended resistance range on request
Passivated NiCr
resistance film
Adhesion layer
High purity
alumina substrate
Nickel barrier
Solder
coating
Passivation
ABS
TCR 10 ppm/°C
ABS
TOL. 0.1 %
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
MODEL RV
Absolute TCR E: ± 25 ppm/°C
Y: ± 10 ppm/°C - 55 °C to + 155 °C
Absolute tolerance ± 0.1 %, ± 0.5 %, ± 1 %, ± 2 %, ± 5 % (R 500 )
± 0.5 %, ± 1 %, ± 2 %, ± 5 % (R 100 )
Voltage coefficient 0.1 ppm/V
Operating temperature range - 55 °C to + 155 °C
Storage temperature range - 55 °C to + 155 °C
Noise - 35 dB typical
Thermal EMF < 0.1 μV/°C
Load life stability ± (0.1 % Rn (1) ± 0.05 ) 1000 h Pn at + 70 °C
CASE SIZES 0505, 0603 0805 1206
Resistance range (2) 100 to 260 k100 to 300 k100 to 1 M
Power rating Pn 125 mW 200 mW 330 mW
Limiting voltage (UL) 50 V 50 V 75 V
RV
www.vishay.com Vishay Sfernice
Revision: 08-Feb-12 2Document Number: 60022
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POPULAR OPTION
Option: AEC-Q200 moisture resistance
Option to order: 0058: Specific production process to withstand 85 °C/85 % RH at Pn/10
Notes
(1) Test requiring parts to be mounted on PCB will be performed with the requirement that termination alloy will be the same as solder paste
alloy. Gold termination will be tested as B termination
(2) Rn: Nominal Resistance
Pn: Nominal Power
(3) Option to order: 0058
DIMENSIONS in millimeters (inches)
SERIES/
CASE SIZES
ABD/EC
Min. Max. Min. Max. Min. Max. Min. Max.
RV 0505 1.198
(0.047)
1.502
(0.059)
1.143
(0.045)
1.397
(0.055)
0.250
(0.010)
0.510
(0.020)
0.373
(0.015)
0.627
(0.025)
RV 0603 1.368
(0.054)
1.672
(0.066)
0.623
(0.025)
0.877
(0.035)
0.250
(0.010)
0.510
(0.020)
0.373
(0.015)
0.627
(0.025)
RV 0805 1.758
(0.069)
2.062
(0.081)
1.143
(0.045)
1.397
(0.055)
0.250
(0.010)
0.510
(0.020)
0.373
(0.015)
0.627
(0.025)
RV 1206 2.908
(0.114)
3.212
(0.126)
1.473
(0.058)
1.727
(0.068)
0.250
(0.010)
0.510
(0.020)
0.373
(0.015)
0.627
(0.025)
ENVIRONMENTAL TEST
TEST CONDITIONS VALUES AND DRIFTS (R/R ± %)
CECC REQUIREMENTS TYPICAL PERFORMANCE
Overload 6.25 x rated power/2 s (or 2 UL) 0.05 % Rn (2) + 0.05 0.01 % Rn (2)
Climatic sequences (1) - 55/+ 155 °C
5 moisture cycles 0.1 % Rn (2) + 0.05 0.02 % Rn (2)
Thermal shock (1) - 55/+ 155 °C
5 cycles 30 min 0.05 % Rn (2) + 0.05 0.02 % Rn (2)
Load life (1) + 70 °C/Pn
1000 h 0.1 % Rn (2) + 0.05 0.05 % Rn (2)
Resistance to solder heat + 260 °C/10 s 0.05 % Rn (2) + 0.05 0.02 % Rn (2)
Moisture resistance (1)
+ 40 °C/93 % HR
Pn/10 0.1 % Rn (2) + 0.05 0.01 % Rn (2)
AEC-Q200 (3)
85 °C/85 % RH/Pn/10
1000 h
0.5 % + 0.05 Max. < 0.3 % + 0.05
High temperature storage 1000 h at + 155 °C 0.1 % Rn (2) + 0.05 0.05 % Rn (2)
Bending (1) 10 bends/2 mm/5 s 0.05 % Rn (2) + 0.05 0.02 % Rn (2)
SPECIFIC CONDITIONS DUE TO TERMINATION TYPE
TEST CONDITIONS VALUES AND DRIFTS
B; G N VISHAY REQUIREMENTS TYPICAL PERFORMANCE
Solderability + 235 °C/2 s
Sn60Pb40 alloy
+ 245 °C/3 s
Sn97Ag3 alloy VISUAL INSPECTION
High T° reflow profile N/A + 255 °C/40 s
(on parts) 0.02 % Rn (2) + 0.05 0.01 % Rn (2) + 0.05
A
D
D
C
E
E
B
RV
www.vishay.com Vishay Sfernice
Revision: 08-Feb-12 3Document Number: 60022
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DERATING CURVE
PACKAGING INFORMATION
SIZE
NUMBER OF PIECES PER PACKAGE
WAFFLE PACK
(2" x 2")
TAPE AND REEL TAPE
WIDTH
Min. Max.
0505 400
100 4000 8 mm
(0.315”)
0603
0805 100
1206 140
07020 40 60 80 100 120 140 155
0
20
40
60
80
100
Ambient Temperature in °C
Rated Power (%)
125
MECHANICAL SPECIFICATIONS
Resistive material Nichrome
Substrate material Alumina
Plating Tin lead over nickel or tin silver over nickel or gold over nickel
Marking resistance to solvents Per CECC Specs
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RV0505E1001DBT1016
GLOBAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION
0505
0603
0805
1206
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
The first 3 digits
(2 digits are enough
for tolerance G and J)
are significant figures
and the last digit
specifies the number
of zeros to follow.
R designates
decimal point
10R0 = 10
3901 = 3900
1004 = 1 M
B = ± 0.1 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Waffle pack
T =
Tape and reel
Leave blank
if no option
B: Lead bearing version
N and G: Lead (Pb)-free/RoHS version
Historical Part Number example: RV 0505 25PPM 1K 0.5 % B TR R1016
PART NUMBER DESCRIPTION (for information only)
RV 0505 25 PPM 1K 0.5 % B TR R1016
MODEL SIZE TCR OHMIC VALUE TOLERANCE TERMINATION PACKAGING OPTION
V0505E100R1DBT1016
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
