(1.27 mm) .050"
(1.27 mm x 1.27 mm)
.050" x .050"
micro pitch
TFML–115–02–L–D–K
TFM–110–02–L–D–LC
TFM–115–02–L–S
Surface mount or
through-hole tails
TFM–110–01–L–D–RE1–WT
Shrouded body
for blind mating
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
NO. PINS
PER ROW
1
Note:
Some sizes, styles and
options are non-standard,
non-returnable.
TYPE
STRIP
SMT & THROUGH-HOLE HEADER
TFM
= Standard
TFML
= Locking
(–01 & –02
lead style only)
03, 04, 06, 08
(TFM –01 & –02 only)
05, 07, 10, 15, 20,
25, 30, 35, 40, 45, 50
(Standard sizes)
PLATING
OPTION
–L
= 15 µ" (0.38 µm)
Gold on post,
Matte Tin on tail
(Call Samtec for
E.L.P.™ plating option)
Specify
LEAD STYLE
from chart
LEAD STYLE
TFM-DH to SFM-DH SHOWN
TFM to SFM-SH SHOWN
LEAD
STYLE
(T/H) B C
–01 (5.59) .220 (1.97) .078
–03* (5.59) .220 (2.77) .109
–11* (7.37) .290 (1.97) .078
–13* (7.37) .290 (2.77) .109
–21* (9.14) .360 (1.97) .078
–23* (9.14) .360 (2.77) .109
–31* (11.05) .435 (1.97) .078
* Not Available with 07 or -S row option
–WT
(–01 & –02 ONLY)
–LC
(SMT or TH)
SURFACE MOUNTTHROUGH-HOLE
DOUBLE ROW
SINGLE ROW
TFM Board Mates:
SFM, SFMC
TFM Cable Mates:
SFSD
TFML Board Mates:
SFML
TFM-DH Board Mates:
SFM (-DH), SFMC
TFM-DH Cable Mates:
SFSDX (-S, -D, -SR, -DR)
LEAD
STYLE
(SMT) A
–02 (5.72) .225
–12* (7.49) .295
–22* (9.27) .365
–32* (11.18) .440
* N/A with 07, -DH or
-S row option
EXTENDED LIFE
PRODUCT
10 YEAR MFG
WITH 30 µ" GOLD
HIGH MATING
CYCLES
For complete specifications and
recommended PCB layouts
see www.samtec.com?TFM or
www.samtec.com?TFML
Insulator Material:
Black Liquid Crystal Polymer
Terminal Material:
Phosphor Bronze
Plating:
Au or Sn over 50 µ" (1.27 µm) Ni
Current Rating (TFM/SFM):
3.2 A per pin
(2 pins powered)
Voltage Rating:
250 VAC mated with SFM
Operating Temp Range:
-55 °C to +125 °C
RoHS Compliant:
Ye s
For complete scope
of recognitions see
www.samtec.com/quality
RECOGNITIONS
PROCESSING
Lead-Free Solderable:
Ye s
SMT Lead Coplanarity:
(0.10 mm) .004" max (05-25)
(0.15 mm) .006" max (30-50)*
*(.004" stencil solution
may be available; contact
IPG@samtec.com)
FILE NO. E111594
MATED HEIGHTS
LEAD STYLE MATED
HEIGHT*
TFM SFM
– 02
02
(6.35) .250
– 12 (8.13) .320
– 22 (9.91) .390
– 32 (11.81) .465
LEAD STYLE MATED
HEIGHT*
TFM SFM
–01
–01
(5.97) .235
–03 (5.97) .235
–11 (7.75) .305
–13 (7.75) .305
–21 (9.53) .375
–23 (9.53) .375
–31 (11.43) .450
*Processing conditions will
affect mated height.
OTHER SOLUTIONS
Lower cost plating options.
See TFC Series.
SPECIFICATIONS
–A
(SMT or TH)
HIGH-SPEED CHANNEL PERFORMANCE
Rating based on Samtec reference
channel. For full SI performance data
visit Samtec.com or contact
SIG@samtec.com Gbps
8
APPLICATIONS
F-219 (Rev 06NOV20)
(0.36) .014
(0.46) .018 DIA
A
(1.42)
.056
(1.40)
.055
(1.27)
.050
DIA
(1.14)
.045
(2.35)
.093
(0.64)
.025
B
C
(1.27) .050
(1.27)
.050
(2.79)
.110
(1.27) .050 x
No. of Positions + (3.18) .125
(1.27) .050 x
No. of Positions + (3.18) .125
(4.45)
.175
(See website for –REX,
–DH, –DS, –WT OAL)
(5.72)
.225
01
01
02
TFM, TFML SERIES
(1.27 mm)
.050" pitch
Shrouded body for
blind mating
Surface mount or
through-hole tails
TFML–150–01–L–D–LC
TFM–125–01–L–D–WT
TFM–110–02–L–D–DS
Screw down
option Weld tab
option
TFM–105–01–L–D–RA
TFM–110–02–L–DH
Mates with SFM for
coplanar mating
• Passes 10 Year MFG
• Locking option
• Locking clip option
Weld tab option
• Screw down option
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
SMT & THROUGH-HOLE HEADER
(1.91)
.075
(0.51) .020
(0.51) .020
(1.27)
.050
(6.48)
.255
(1.99)
.079
(3.81)
.150
(0.76)
.030
(2.26)
.089
(1.91)
.075
OPTION
ROW
OPTION
–S
= Single Row
(TFM only)
–D
= Double Row
–DH*
= Double Horizontal
(TFM lead style –02 only)
(05 thru 50 positions only)
(–TR option only
available)
Specify only –RA, –RE1 or –RE2
–RA
= Right-angle
(Lead style –01 only)
–RE1
= Right-angle Elevated for (1.58 mm) .062" PCB
(Requires TFM lead style –01, –D row and –WT)
–RE2
= Right-angle Elevated for (2.36 mm) .093" PCB
(Requires TFM lead style –01, –D row and –WT)
SMT lead styles only
Specify only –K or –P
–K
= Polyimide Film Pick & Place Pad
–P
= Plastic Pick & Place Pad
(5 positions minimum)
(Not available with
5 position with –WT)
Specify –TR last
–TR
= Tape & Reel
(Not available with –DS)
–FR
= Full Reel Tape & Reel
(must order max. quantity per reel;
contact Samtec for quantity breaks)
(Not available with –DS)
–RE1 & –RE2
–RA
–DH*
–DS
(–D, –01 & –02 ONLY)
Specify only –A, –LC, –DS or –WT
Not available with –RA, –RE1 and –RE2
unless otherwise noted.
–A
= Alignment Pin
–LC
= Locking Clip
(Manual Placement required)
–DS
= Dual Screw Down for
(1.60 mm) .062" PCB
(05, 07, 10, 15, 20, 25, 30,
35, 40 positions only)
(TFM lead styles –01 and –02 only)
(Requires –D row option)
(Mates with SFM–DS option and
SFSD/SFSDT –SS and –DS option only)
(Not available with –A, –LC,
–WT, –K, –P, –TR)
–WT
= Weld Tab
(TFM lead styles –01 and –02 only)
(Required callout for –RE1 & –RE2)
(Mates to SFSS/SFSD –SR and
–DR option only)
(05, 07, 10, 15, 20, 25, 30, 35,
40, 45, 50 positions only)
ALSO AVAILABLE
(MOQ Required)
Solder nail option
Other sizes
Other platings
* Note:
Weld tab is standard on –DH option.
No need to specify –WT.
Note: The recommended -REX PCB board layout
is different from the -RA. Contact IPG@samtec.com
before designing your board for specifications.