TS941 TS942 TS944 OUTPUT RAIL TO RAIL MICROPOWER OPERATIONAL AMPLIFIERS RAIL TO RAIL OUTPUT VOLTAGE SWING MICROPOWER CONSUMPTION (1.2A) SINGLE SUPPLY OPERATION (2.5V to 10V) CMOS INPUTS ULTRA LOW INPUT BIAS CURRENT (1pA) ESD PROTECTION (2kV) LATCH-UP IMMUNITY (Class A) AVAILABLE IN SOT23-5 MICROPACKAGE DESCRIPTION TS941ILT Output 1 VDD 2 Non-inverting input The TS94x (Single, Dual & Quad) is Operational Amplifier characterized for 2.5V to 10V operation over -40C to +85C temperature range. It is exhibiting an excellent consumption - 1.2A, while featuring 10kHz gain bandwidth product, 1.5mA output capability and output Rail to Rail operation - 2.85V typ @ 3V with RL=10k. The TS94x Op-Amp is ideal for battery-powered systems, where very low supply current and output Rail to Rail are required. Its very low - 1pA typ input bias current and constant supply current over supply voltage enhance TS94x's performance near the end of the life battery charge. 3 5 VCC 4 Inverting input TS941ID-TS941IDT 8 N.C. N.C. 1 Inve rting Inp u t 1 2 - 7 VCC 3 + 6 Output 2 No n-inve rting Inp ut 1 5 N.C. V DD 4 TS942IN-TS942ID-TS942IDT-TS942IPT APPLICATION PIN CONNECTIONS (top view) Battery-powered systems (Alarm) Portable communication systems (Pagers) Smoke/gas/fire detectors Instrumentation & sensoring PH Meter 8 VCC Output 1 1 Inve rting Inp ut 1 2 - Non-inve rting Inp ut 1 3 + 7 Output 2 VDD 4 - 6 Inve rting Input 2 + 5 Non-inve rting Inp ut 2 ORDER CODE Part Number TS941I TS941AI TS941BI TS942I TS942AI TS942BI TS944I TS944AI TS944BI Temperature Range Package N D P L * * * * * * * * * * * * -40, +85C -40, +85C -40, +85C * * * * * * SOT23 Marking K201 K202 K203 * * * * * * TS944IN-TS944ID-TS944IDT-TS944IPT 14 Outp u t 4 Ou tpu t 1 1 Inve rting Inpu t 1 2 - - 13 Inve rting Inpu t 4 Non-inve rting Inpu t 1 3 + + 12 Non-inve rting Inpu t 4 Non -inve rting Inp ut 2 5 + + Inve rting Inp ut 2 6 - - 11 VDD VCC 4 Ou tpu t 2 7 10 Non-inve rting Inpu t 3 9 Inve rting Inpu t 3 8 Outp u t 3 N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT) P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) L = Tiny Package (SOT23-5) - only available in Tape & Reel (LT) December 2001 1/15 TS941-TS942-TS944 ABSOLUTE MAXIMUM RATINGS Symbol VCC Vid Vin Parameter Supply voltage 1) Differential Input Voltage 2) 3) Value Unit 12 V 12 V -0.3 to 12.3 V Toper Operating Free Air Temperature Range -40 to + 85 C Tstd Storage Temperature Range -65 to +150 C 150 C Tj Rthjc Input Voltage Range Maximum Junction Temperature Thermal Resistance Junction to Case SOT23-5 DIP8 DIP14 SO8 SO14 TSSOP8 TSSOP14 C/W 4) R thja Thermal Resistance Junction to Ambient - SOT23-5 ESD Human Body Model Latch-up Immunity Lead Temperature (soldering, 10sec) 81 42 32 28 22 26 21 256 C/W 2 Class A 250 kV C Value Unit 2.5 to 10 V 1. All voltages values, except differential voltage are with respect to network terminal. 2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal. 3. The magnitude of input and output voltages must never exceed VCC +0.3V. 4. Short-circuits can cause excessive heating and destructive dissipation. OPERATING CONDITIONS Symbol VCC Vicm 2/15 Parameter Supply Voltage Common Mode Input Voltage Range VCC- -0.2 to VCC+ -1.3 V TS941-TS942-TS944 ELECTRICAL CHARACTERISTICS VCC = +2.5V, VDD = 0V, RL connected to VCC/2, Tamb = 25C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Input Offset Voltage TS941/2/4 TS941/2/4A TS941/2/4B Vio Vio 10 5 2 mV V/C Input Offset Voltage Drift 7 Iio Input Offset Current 1) 1 100 pA Iib Input Bias Current 1) 1 150 pA CMR Common Mode Rejection Ratio 60 85 dB SVR Supply Voltage Rejection Ratio 50 78 dB Avd Large Signal Voltage Gain V O = 2Vpp VOH High Level Output Voltage VID = 100mV VOL Low Level Output Voltage VID = -100mV R L = 1M R L = 1M R L = 10k dB 100 2.45 2.3 R L = 1M R L = 10k 2.49 2.4 1 100 V 5 200 mV Output Source Current Io VID = 100mV, V O = VDD 350 650 VID = -100mV, V O = VCC 280 500 A Output Sink Current Supply Current (per amplifier) AVCL = 1, no load 1.2 Gain Bandwith Product RL = 1M, C L = 50pF 10 kHz SR Slew Rate RL = 1M, C L = 50pF 4.5 V/ms m Phase Margin CL = 50pF 65 Degrees ICC GBP 3 1.8 A 1. Maximum values including unavoidable inaccurates of the industrial test. 3/15 TS941-TS942-TS944 ELECTRICAL CHARACTERISTICS VCC = +3V, VDD = 0V, RL connected to VCC/2, Tamb = 25C (unless otherwise specified) 2) Symbol Parameter Min. Typ. Max. Unit Input Offset Voltage TS941/2/4 TS941/2/4A TS941/2/4B Vio Vio 10 5 2 mV V/C Input Offset Voltage Drift 7 Iio Input Offset Current 1) 1 100 pA Iib Input Bias Current 1) 1 150 pA CMR Common Mode Rejection Ratio 60 85 dB SVR Supply Voltage Rejection Ratio 50 85 dB Avd Large Signal Voltage Gain V O = 2Vpp VOH High Level Output Voltage VID = 100mV VOL Low Level Output Voltage VID = -100mV R L = 1M R L = 1M R L = 10k dB 100 2.9 2.8 R L = 1M R L = 10k 2.99 2.85 1 100 V 5 200 mV Output Source Current Io VID = 100mV, V O = VDD 680 1500 VID = -100mV, V O = VCC 650 1300 A Output Sink Current Supply Current (per amplifier) AVCL = 1, no load 1.2 Gain Bandwith Product RL = 1M, C L = 50pF 10 kHz SR Slew Rate RL = 1M, C L = 50pF 4.5 V/ms m Phase Margin CL = 50pF 65 Degrees ICC GBP 1. Maximum values including unavoidable inaccurates of the industrial test. 2. All electrical values are guaranted with correlation measurements at 2.5V and 5V 4/15 3 1.8 A TS941-TS942-TS944 ELECTRICAL CHARACTERISTICS VCC = +5V, VDD = 0V, RL connected to VCC/2, Tamb = 25C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Input Offset Voltage TS941/2/4 TS941/2/4A TS941/2/4B Vio Vio 10 5 2 mV V/C Input Offset Voltage Drift 7 Iio Input Offset Current 1) 1 100 pA Iib Input Bias Current 1) 1 150 pA CMR Common Mode Rejection Ratio 60 85 dB SVR Supply Voltage Rejection Ratio 50 85 dB Avd Large Signal Voltage Gain V O = 2Vpp VOH High Level Output Voltage VID = 100mV VOL Low Level Output Voltage VID = -100mV R L = 1M R L = 1M R L = 10k dB 100 4.9 4.8 R L = 1M R L = 10k 4.99 4.85 1 100 V 5 150 mV Output Source Current Io VID = 100mV, V O = VDD 3 4.5 VID = -100mV, V O = VCC 3.7 5 mA Output Sink Current Supply Current (per amplifier) AVCL = 1, no load 1.2 Gain Bandwith Product RL = 1M, C L = 50pF 10 kHz SR Slew Rate RL = 1M, C L = 50pF 4.5 V/ms m Phase Margin CL = 50pF 65 Degrees ICC GBP 3 1.85 A 1. Maximum values including unavoidable inaccurates of the industrial test. 5/15 TS941-TS942-TS944 Inp ut O ffset Voltage Drift vs Temperature Supply Current/Amplifier vs Supply Voltage 2.0 Tamb = 25C 300 V cc = 2.5V & 5V 200 Supply Current (A) Input Offset Voltage Drift (V) 400 100 0 -100 -200 -300 1.5 1.0 0.5 -400 -500 -40 -20 0 20 40 60 0.0 80 0 Tem peratu re (C) Supply Current/Amplifier vs Supply Voltage in Overdrive 2 4 6 Supply Voltage (V) 8 10 Supply Current/Amplifier vs Temperature 1.30 1.5 1.0 Supply Current (A) Supply Current (A) Tamb = 25C Vid = - 100mV Vid = + 100mV 0.5 0.0 0 2 4 6 8 10 1.25 Vcc from 2.5V to 10V 1.20 1.15 1.10 -40 -20 0 4 Isink, Vcc=3V 2 0 40 60 80 Output Short-Circuit Current vs Supply Voltage Isink, Vcc=5V 30 Output Short-Circuit Current (mA) Output Short-circuit Current (mA) Output Short-Circuit Current vs Temperature 6 20 Temperature(C) Supply Voltage (V) Isource,Vcc=3V -2 Isource, Vcc=5V -4 Tamb = 25C 20 Sink 10 0 -10 Source -20 -6 -30 -40 -20 0 20 40 Temperature (C) 6/15 60 80 2 4 6 Supply Voltage (V) 8 10 TS941-TS942-TS944 Output Short-circuit Current vs Output Voltage 2.0 Sink T = -40C 0.5 Output Short-Circuit Current (mA) Output Short-Circuit Current (mA) 1.0 TT==+25C +25C T = +85C 0.0 Vcc = 2.6V -0.5 T = +85C -1.0 T = +25C Source -1.5 T = -40C 0 1 8.0 T = +85C 0.0 Vcc = 3V T = +85C -1.0 T = +25C -2.0 Source T = -40C 0 6.0 T = +25C 4.0 T = +85C 2.0 Vcc = 5V 0.0 -2.0 T = +85C -4.0 T = +25C -6.0 Source T = -40C -8.0 0 1 2 3 Output Voltage (V) 4 Vcc = 10V 0.0 T = +85C -10.0 T = +25C -20.0 Source T = -40C RL=1M ohm 1 8 0 Voltage referenced to Vcc (mV) RL=100k ohm 6 Supply Voltage (V) T = +85C 10.0 2 4 6 Output Voltage (V) 8 10 Low Level Output Voltage vs Supply Voltage 10 4 T = +25C 1,000 RL=10k ohm 2 T = -40C Sink 20.0 5 High Level Output Voltage vs Supply Voltage RL tied to Vdd Single Supply Vid = +100mV 3 -30.0 1,000 100 2 Output Voltage (V) 30.0 T = -40C Sink 1 Output Short-circuit Current vs Output Voltage Output Short-Circuit Current (mA) Output Short-Circuit Current (mA) Sink 1.0 3 2 Output Voltage (V) Output Short-circuit Current vs Output Voltage Voltage referenced to Vdd (mV) T = -40C T = +25C -3.0 -2.0 Voltage Referenced to Vcc (mV) Output Short-circuit Current vs Output Voltage 10 RL=10k ohm 100 RL tied to Vcc Single Supply Vid = -100mV RL=100 ohm 10 RL=1M ohm 1 2 4 6 Supply Voltage (V) 8 10 7/15 TS941-TS942-TS944 Gain and Phase vs Frequency Gain and Phase vs Frequency 160 60 50 140 50 140 40 120 40 120 Gain (dB) 60 30 100 phase gain 10 0 100 60 30 100 phase 80 gain 10 40 100,000 1,000 10,000 Frequency (Hz) 0 100 Small Signal Transient Response 60 40 1,000 10,000 Frequency (Hz) 100,000 Large Signal Transient Response 300 2.5 Vcc = +-2.5V Gain = -1 RL = 1M ohm CL = 50 pF 200 2.0 Output Voltage (V) Output Voltage (mV) 160 20 80 20 180 RL = 1M ohm CL = 100 pF Vcc = 3V & 5V Phase () RL = 1M ohm CL = 50 pF Vcc = 3V & 5V Gain (dB) 70 Phase () 180 70 100 0 1.5 1.0 Vcc = +-2.5V Gain = -1 RL = 1M ohm CL = 50 pF 0.5 0.0 -0.5 -100 0.0 0.5 1.0 1.5 2.0 Time (ms) Slew Rate Positive and Negative vs Temperature 4.8 Slew rate negative Slew Rate (V/ms) 4.6 4.4 4.2 Slew rate positive 4.0 Gain = +1 RL = 1M ohm CL = 100pf Vcc = 5V 3.8 3.6 3.4 -80 8/15 -40 0 40 Temperature (C) 80 120 -1.0 0.0 1.0 2.0 3.0 Time (ms) 4.0 5.0 TS941-TS942-TS944 TS942IN PACKAGE MECHANICAL DATA 8 PINS - PLASTIC PACKAGE Millimeters Inches Dim. Min. A a1 B b b1 D E e e3 e4 F i L Z Typ. Max. Min. 3.32 0.51 1.15 0.356 0.204 1.65 0.55 0.304 10.92 9.75 7.95 0.020 0.045 0.014 0.008 Max. 0.065 0.022 0.012 0.430 0.384 0.313 2.54 7.62 7.62 3.18 Typ. 0.131 0.100 0.300 0.300 6.6 5.08 3.81 1.52 0.125 0260 0.200 0.150 0.060 9/15 TS941-TS942-TS944 TS941ID - TS942ID PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Millimeters Inches Dim. Min. A a1 a2 a3 b b1 C c1 D E e e3 F L M S 10/15 Typ. Max. 0.65 0.35 0.19 0.25 1.75 0.25 1.65 0.85 0.48 0.25 0.5 4.8 5.8 5.0 6.2 0.1 Min. Typ. Max. 0.026 0.014 0.007 0.010 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.189 0.228 0.197 0.244 0.004 45 (typ.) 1.27 3.81 3.8 0.4 0.050 0.150 4.0 1.27 0.6 0.150 0.016 8 (max.) 0.157 0.050 0.024 TS941-TS942-TS944 TS942IPT PACKAGE MECHANICAL DATA 8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE k c 0.25mm .010 inch GAGE PLANE L1 L L L1 SEATING PLANE E1 A E A2 A1 4 5 D b e 8 1 PIN 1 IDENTIFICATION Millimeters Inches Dim. Min. A A1 A2 b c D E E1 e k l 0.05 0.80 0.19 0.09 2.90 4.30 0 0.50 Typ. 1.00 3.00 6.40 4.40 0.65 0.60 Max. Min. 1.20 0.15 1.05 0.30 0.20 3.10 0.01 0.031 0.007 0.003 0.114 4.50 0.169 8 0.75 0 0.09 Typ. 0.039 0.118 0.252 0.173 0.025 0.0236 Max. 0.05 0.006 0.041 0.15 0.012 0.122 0.177 8 0.030 11/15 TS941-TS942-TS944 TS944IN PACKAGE MECHANICAL DATA 14 PINS - PLASTIC PACKAGE Millimeters Inches Dim. Min. a1 B b b1 D E e e3 F i L Z 12/15 Typ. 0.51 1.39 Max. Min. 1.65 0.020 0.055 0.5 0.25 Typ. 0.065 0.020 0.010 20 0.787 8.5 2.54 15.24 0.335 0.100 0.600 7.1 5.1 0.280 0.201 3.3 1.27 Max. 0.130 2.54 0.050 0.100 TS941-TS942-TS944 TS944ID PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO) G c1 s e3 D E b1 e a1 b A a2 C L M 8 1 7 F 14 Millimeters Inches Dim. Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S Typ. Max. Min. 1.75 0.2 1.6 0.46 0.25 0.1 0.35 0.19 Typ. 0.004 0.014 0.007 0.5 Max. 0.069 0.008 0.063 0.018 0.010 0.020 45 (typ.) 8.55 5.8 8.75 6.2 0.336 0.228 1.27 7.62 3.8 4.6 0.5 0.344 0.244 0.050 0.300 4.0 5.3 1.27 0.68 0.150 0.181 0.020 0.157 0.208 0.050 0.027 8 (max.) Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK. 13/15 TS941-TS942-TS944 TS944IPT PACKAGE MECHANICAL DATA 14 PINS - THIN SHRINK SMALL OUTLINE PACKAGE k E1 L1 L c E A A2 D e b A1 Millimeters Inches Dim. Min. A A1 A2 b c D E E1 e k l 14/15 0.05 0.80 0.19 0.09 4.90 4.30 0 0.50 Typ. 1.00 5.00 6.40 4.40 0.65 0.60 Max. Min. 1.20 0.15 1.05 0.30 0.20 5.10 0.01 0.031 0.007 0.003 0.192 4.50 0.169 8 0.75 0 0.09 Typ. 0.039 0.196 0.252 0.173 0.025 0.0236 Max. 0.05 0.006 0.041 0.15 0.012 0.20 0.177 8 0.030 TS941-TS942-TS944 TS941ILT PACKAGE MECHANICAL DATA 5 PINS - TINY PACKAGE (SOT23) A E A2 D b A1 L C E1 Millimeters Inches Dim. A A1 A2 B C D D1 e E F L K Min. Typ. Max. Min. Typ. Max. 0.90 0 0.90 0.35 0.09 2.80 1.20 1.45 0.15 1.30 0.50 0.20 3.00 0.035 0.047 0.035 0.014 0.004 0.110 3.00 1.75 0.60 10d 0.102 0.059 0.004 0d 0.041 0.016 0.006 0.114 0.075 0.037 0.110 0.063 0.014 0.057 0.006 0.051 0.020 0.008 0.118 2.60 1.50 0.10 0d 1.05 0.40 0.15 2.90 1.90 0.95 2.80 1.60 0.5 0.0118 0.069 0.024 10d Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibil ity for the consequences of use of such information nor for any infring ement of patents or other righ ts of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change witho ut notice. This publ ication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life suppo rt devices or systems withou t express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom http://www. st.com 15/15