© Semiconductor Components Industries, LLC, 2014
August, 2014 − Rev. 1 1Publication Order Number:
MBR1045MFS/D
MBR1045MFS,
NRVB1045MFS
Switch Mode
Power Rectifiers
These state−of−the−art devices have the following features:
Features
•Low Power Loss / High Efficiency
•New Package Provides Capability of Inspection and Probe After
Board Mounting
•Guardring for Stress Protection
•Low Forward Voltage Drop
•150°C Operating Junction Temperature
•Wettable Flacks Option Available
•NRVB Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
•These are Pb−Free and Halide−Free Devices
Mechanical Characteristics:
•Case: Epoxy, Molded
•Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in.
•Lead Finish: 100% Matte Sn (Tin)
•Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
•Device Meets MSL 1 Requirements
Applications
•Excellent Alternative to DPAK in Space−Constrained Automotive
Applications
•Output Rectification in Compact Portable Consumer Applications
•Freewheeling Diode used with Inductive Loads
Device Package Shipping†
ORDERING INFORMATION
MBR1045MFST1G SO−8 FL
(Pb−Free) 1500 /
Tape & Reel
SCHOTTKY BARRIER
RECTIFIERS
10 AMPERES
45 VOLTS
http://onsemi.com
1,2,3 5,6
SO−8 FLAT LEAD
CASE 488AA
STYLE 2
B1045 = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
ZZ = Lot Traceability
MARKING
DIAGRAM
B1045
AYWZZ
A
A
A
Not Used
C
C
1
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
MBR1045MFST3G SO−8 FL
(Pb−Free) 5000 /
Tape & Reel
NRVB1045MFST1G SO−8 FL
(Pb−Free) 1500 /
Tape & Reel
NRVB1045MFST3G SO−8 FL
(Pb−Free) 5000 /
Tape & Reel
MBR1045MFS, NRVB1045MFS
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR45
V
Average Rectified Forward Current
(Rated VR, TC = 142°C) IF(AV) 10 A
Peak Repetitive Forward Current,
(Rated VR, Square Wave, 20 kHz, TC = 140°C) IFRM 20 A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 150 A
Storage Temperature Range Tstg −65 to +175 °C
Operating Junction Temperature TJ−55 to +150 °C
Unclamped Inductive Switching Energy (10 mH Inductor, Non−repetitive) EAS 150 mJ
ESD Rating (Human Body Model) 3B
ESD Rating (Machine Model) M4
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be af fected.
NOTE: The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RJA
THERMAL CHARACTERISTICS
Characteristic Symbol Typ Max Unit
Thermal Resistance, Junction−to−Case, Steady State
(Assumes 600 mm2 1 oz. copper bond pad, on a FR4 board) RθJC − 1.7 °C/W
ELECTRICAL CHARACTERISTICS
Instantaneous Forward Voltage (Note 1)
(iF = 10 A, TJ = 125°C)
(iF = 10 A, TJ = 25°C)
(iF = 20 A, TJ = 125°C)
(iF = 20 A, TJ = 25°C)
vF0.430
0.504
0.550
0.595
0.52
0.62
0.65
0.75
V
Reverse Current (Note 1)
(Rated dc Voltage, TJ = 125°C)
(Rated dc Voltage, TJ = 25°C)
iR47
0.076 170
0.500
mA
Diode Capacitance CD300 pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2.0%.
MBR1045MFS, NRVB1045MFS
http://onsemi.com
3
TYPICAL CHARACTERISTICS
Figure 1. Typical Instantaneous Forward
Characteristics Figure 2. Maximum Instantaneous Forward
Characteristics
VF, INSTANTANEOUS FORWARD VOLTAGE (V) VF, INSTANTANEOUS FORWARD VOLTAGE (V)
TA = 125°C
TA = 25°C
TA = 150°C
TA = −40°C
IF, INSTANTANEOUS FORWARD CURRENT (A)
100
10
1
0.10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
IF, INSTANTANEOUS FORWARD CURRENT (A)
100
10
1
0.10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
TA = 125°C
TA = 150°C
Figure 3. Typical Reverse Characteristics
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
IR, INSTANTANEOUS REVERSE CURRENT (A)
1.E+00
0
1.E−01
1.E−02
1.E−03
1.E−04
1.E−05
1.E−06
1.E−07
1.E−08
1.E−09
1.E−10 10 20 30 40
TA = 25°C
TA = −40°C
TA = 150°C
TA = 125°C
TA = 25°C
TA = −40°C
Figure 4. Maximum Reverse Characteristics
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
IR, INSTANTANEOUS REVERSE CURRENT (A)
1.E+00
0
1.E−01
1.E−02
1.E−03
1.E−04
1.E−05
1.E−06
1.E−07
1.E−08 10 20 30 40 455152535
TA = 150°C
TA = 125°C
TA = 25°C
TA = −40°C
Figure 5. Typical Junction Characteristics
VR, REVERSE VOLTAGE (V)
C, JUNCTION CAPACITANCE (pF)
10000
010203040
1000
100
10
TJ = 25°C
Figure 6. Current Derating TO−220AB
TC, CASE TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD CURRENT (A)
20
0 40 80 100 140 16020 60 120
15
10
5
0
RqJC = 1.7°C/W
dc
SQUARE WAVE
MBR1045MFS, NRVB1045MFS
http://onsemi.com
4
TYPICAL CHARACTERISTICS
Figure 7. Forward Power Dissipation
IF(AV), AVERAGE FORWARD CURRENT (A)
43210
0
1
2
3
5
6
7
8
PF(AV), AVERAGE FORWARD
POWER DISSIPATION (W)
4
TJ = 150°C
Square Wave
dc
IPK/IAV = 20
IPK/IAV = 10
IPK/IAV = 5
0.001
0.01
0.1
1
10
100
0.000001 0.00001 0.0001 10000.001 0.01 0.1 1 10 100
Figure 8. R(t) vs. Duty
t, PULSE TIME (S)
R(t), (°C/W)
50% Duty Cycle
20%
10% 5%
2%
1%
Single Pulse
Assumes 25°C ambient and soldered to
a 600 mm2 − oz copper pad on PCB
MBR1045MFS, NRVB1045MFS
http://onsemi.com
5
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE K
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.270
2X
0.750
1.000
0.905
0.475
4.530
1.530
4.560
0.495
3.200
1.330
0.965
2X
2X
3X 4X
4X
STYLE 2:
PIN 1. ANODE
2. ANODE
3. ANODE
4. NO CONNECT
5. CATHODE
M3.00 3.40
q0 −−−
_
3.80
12
_
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
1234
TOP VIEW
SIDE VIEW
BOTTOM VIEW
D1
E1 q
D
E
2
2
B
A
0.20 C
0.20 C
2 X
2 X
DIM MIN NOM
MILLIMETERS
A0.90 1.00
A1 0.00 −−−
b0.33 0.41
c0.23 0.28
D5.15
D1 4.70 4.90
D2 3.80 4.00
E6.15
E1 5.70 5.90
E2 3.45 3.65
e1.27 BSC
G0.51 0.61
K1.20 1.35
L0.51 0.61
L1 0.125 REF
A
0.10 C
0.10 C
DETAIL A
14
L1
e/2
8X
D2
G
E2
K
b
A0.10 B
C
0.05 cL
DETAIL A
A1
e
3 X
c
4 X
C
SEATING
PLANE
MAX
1.10
0.05
0.51
0.33
5.10
4.20
6.10
3.85
0.71
1.50
0.71
M
PIN 5
(EXPOSED PAD)
5.00 5.30
6.00 6.30
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the r ight t o m ake c hanges wit hout f urt her n ot ice t o a ny p roduct s h erein. SCILLC makes no warranty, representation or guarant ee r egar ding the suitability o f i ts p roduct s f o r a ny
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation s pecial, c onsequential o r i ncidental d amages. “Typical” p aramet ers w hich m ay b e provided in S CILLC d ata s heets and/or specificat ions can and do vary in diff erent applications
and actual performance may vary over time. All operating parameters, including “Typical s” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under i ts p at ent rights nor the rights o f ot hers. SCILLC products are not d esigned, i nt ended, o r authorized for use as components in s yst ems intended for
surgical implant i nto t he b ody, o r o t her a pplicat ions i ntended t o s upport o r s ustain l ife, o r f or a ny o ther a pplication i n w hich t he f ailure o f t he S CILLC p roduct c ould c reate a s ituation w here
personal injury or death may occur. Should Buyer purchase or u se SCILLC products for any such unintended or unauthorized a ppli cat ion, B uyer s hall i ndemnif y a n d h old S CI LLC and
its o f ficers, e mployees, s ubsidiaries, a ff iliates, and distr ibutors h a rmless against a ll c laims, c osts, d amages, a nd e xpenses, a nd r easonable a t torney f ees a r ising o ut o f, d irectly o r i ndirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if s u ch c laim a lleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
MBR1045MFS/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
