www.recom-power.com REV.: 5/2019 ECO-1
RK/H6 & RH/H6
DC/DC Converter
1 Watt
SIP7
Single and Dual
Output
UL60950-1 certified
CAN/CSA C22.2 No. 60950-1-07 certified
UL62368-1 certified
CAN/CSA C22.2 No. 62368-1-14 certified
IEC/EN60950-1 certified
IEC/EN62368-1 certified
CB report
E224736
Features
Unregulated
Converters
• High 6.4kVDC/1s isolation
• Wide operating temperature range from
-40°C to +90°C without derating
• High capacitive load capability
• Continuous short circuit protection
• Efficiency up to 80%
Description
The RK/H6 and RH/H6 series 1W DC/DC converters feature high 6.4kVDC isolation and an extended
operating temperature range up to +90°C without derating, yet are lower cost than standard high
isolation converters. They are suitable for demanding industrial and high isolation test and measurement
applications.
Selection Guide
Part nom. Input Output Output Efficiency Max. Capacitive
Number Voltage Range Voltage Current typ. Load (1)
[VDC] [VDC] [mA] [%] [µF]
RK-xx3.3S/H6 5, 12, 15, 24 3.3 303 71-74 1000
RK-xx05S/H6 5, 12, 15, 24 5 200 74-77 1000
RK-xx12S/H6 5, 12, 15, 24 12 84 77-79 220
RK-xx15S/H6 5, 12, 15, 24 15 66 77-80 220
RH-xx3.3D/H6 5, 12, 15, 24 ±3.3 ±152 73-74 ±330
RH-xx05D/H6 5, 12, 15, 24 ±5 ±100 74-77 ±330
RH-xx12D/H6 5, 12, 15, 24 ±12 ±42 77-80 ±100
RH-xx15D/H6 5, 12, 15, 24 ±15 ±33 78-80 ±100
Notes:
Note1: Max. capacitive load is tested at nominal input voltage and full load
Notes:
Note2: add suffix „K“ for Single output or suffix „H“ for Dual output
Model Numbering
Ordering Examples:
RK-123.3S/H6 = 12VDC Input Voltage, 3.3VDC Output Voltage, Single Output, 6.4kVDC/1s isolation
RH-0505D/H6 = 5VDC Input Voltage, 5VDC Output Voltage, Dual Output, 6.4kVDC/1s isolation
6.4kVDC isolation
Single
6.4kVDC isolation
Dual
Input Voltage
Output Voltage
Input Voltage
Output Voltage
RK- __ __ S/H6
RH- __ __ D/H6
www.recom-power.com REV.: 5/2019 ECO-2
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)
RK/H6 & RH/H6
Series
BASIC CHARACTERISTICS
Parameter Condition Min. Typ. Max.
Internal Input Filter capacitor
Input Voltage Range ±10%
Start-up Time 20ms
Internal Operating Frequency 80kHz
Minimum Load 0%
Output Ripple and Noise 20MHz BW 60mVp-p 120mVp-p
REGULATIONS
Parameter Condition Values
Output Accuracy ±5.0% max.
Line Regulation low line to high line, max. load ±1.2% of 1.0% Vin typ.
Load Regulation (3) 10% to 100% load 10% max.
20
10
0
-10
15
5
-5
-15
-20
Deviation [%]
0 10 20 30 40 50 60 70 80 90 100
Output Load [%]
RK-123.3S/H6
RK-0505S/H6
RK-0512S/H6
RK-2415S/H6
20
10
0
-10
15
5
-5
-15
-20
Deviation [%]
0 10 20 30 40 50 60 70 80 90 100
Output Load [%]
RH-123.3D/H6
RH-0505D/H6
RH-1212D/H6
RH-0515D/H6
Efficiency vs. Load
0 10 20 30 40 50 60 70 80 90 100
100
80
60
40
90
70
50
30
20
10
0
Efficiency [%]
Output Load [%]
RK-123.3S/H6
RK-0505S/H6
RK-0512S/H6
RK-2415S/H6
0 10 20 30 40 50 60 70 80 90 100
100
80
60
40
90
70
50
30
20
10
0
Efficiency [%]
Output Load [%]
RH-123.3D/H6
RH-0505D/H6
RH-1212D/H6
RH-0515D/H6
Single Output
Single Output
Dual Output
Dual Output
Notes:
Note3: Operation below 10% load will not harm the converter, but specifications may not be met
Deviation vs. Load
www.recom-power.com REV.: 5/2019 ECO-3
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)
RK/H6 & RH/H6
Series
ENVIRONMENTAL
Parameter Condition
Value
Operating Temperature Range without derating @ free air convection (see graph) -40°C to +90°C
Operating Altitude 5000m
Operating Humidity non-condensing 5% - 95% RH max.
MTBF according to MIL-HDBK-217F; G.B. +25°C
+85°C
14919 x 10³ hours
9468 x 10³ hours
Derating Graph
SAFETY AND CERTIFICATIONS
Certificate Type Report / File Number Standard
Information Technology Equipment - General Requirements for Safety
E224736-A25-UL
UL60950-1, 2nd Edition, 2014
CAN/CSA-C22.2 No. 60950-1-07, 2nd Edtition, 2014
Audio/Video, information and communication technology equipment -
Part1: Safety requirements
UL62368-1, 2nd Edition, 2014
CAN/CSA-C22.2 No. 62368-1-14, 2nd Edtition, 2014
Information Technology Equipment, General Requirements for Safety (CB) E224736-A26-CB-1 IEC60950-1:2005, 2nd Edition + A2:2013
Information Technology Equipment, General Requirements for Safety EN60950-1:2006 + A2:2013
Audio/video, information and communication technology equipment Part
1: safety requirements (CB) OFF-4787079973-A-2
IEC62368-1:2014, 2nd Edition
Audio/video, information and communication technology equipment Part
1: safety requirements EN62368-1:2014
continued on next page
-40 -20 0 20 40 7060-30 -10 10 30 50 80 90
95
110100
100
80
60
40
90
70
50
30
20
10
0
Output Load [%]
Ambient Temperature [°C]
PROTECTIONS
Parameter Condition Value
Short Circuit Protection (SCP) continuous
Isolation Voltage (4) I/P to O/P tested for 1 second
rated for 1 minute
6.4kVDC
5.2kVDC
Isolation Resistance 10GΩ min.
Isolation Capacitance 75pF max.
Insulation Grade functional
Notes:
Note4: For repeat Hi-Pot testing, reduce the time and/or the test voltage
Note5: Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type
www.recom-power.com REV.: 5/2019 ECO-4
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)
RK/H6 & RH/H6
Series
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter
Type
Value
Material case
potting
non-conductive black plastic, (UL94 V-0)
epoxy, (UL94 V-0)
Dimension (LxWxH) 19.65 x 7.05 x 10.2mm
Weight 2.7g typ.
continued on next page
Certificate Type
Report / File Number
Standard
EAC RU-AT.49.09571 TP TC 004/2011
RoHS 2 RoHS-2011/65/EU + AM-2015/863
EMI Compliance Condition Standard / Criterion
Electromagnetic compatibility of multimedia equipment -
Emission requirements
with external filter
(see filter suggestion below)
EN55032, Class B
EN55032, Class A
L1
C
1
C
2
-Vout
+Vout
-Vin
+Vin
C3
+Vout
+Vin
-Vout
-Vin
L1
C
1
-Vout
+Vout
Com
-Vin
+Vin
+Vout
+Vin
-Vout
-Vin
EMC Filter Suggestion according to EN55032
Single Output
Dual Output
Component List Class A Component List Class B
MODEL C1 L1
RH-0505D/H6
1µF
100V MLCC
68µH choke
RLS-686
RH-1205D/H6
RH-1212D/H6
RH-2405D/H6
MODEL C1 L1
RH-0505D/H6
4.7µF
50V MLCC
68µH choke
RLS-686
RH-1205D/H6
RH-1212D/H6
RH-2405D/H6
Notes:
Note6: Filter suggestions are valid for indicated part numbers only. For other part numbers, please contact RECOM tech support for advice
Component List Class A Component List Class B
MODEL C1 L1 C2 C3
RK-0505S/H6 10µF
100V MLCC
12µH choke
RLS-126
4.7µF
50V MLCC
N/A
RK-0515S/H6 2.2nF
RK-2405S/H6
MODEL C1 L1 C2 C3
RK-0505S/H6 10µF
100V MLCC
12µH choke
RLS-126 N/A N/ARK-0515S/H6
RK-2405S/H6
www.recom-power.com REV.: 5/2019 ECO-5
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)
RK/H6 & RH/H6
Series
The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer.
The
products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or
cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the
unauthorized
use of RECOM products in such safety-critical applications.
PACKAGING INFORMATION
Parameter
Type
Value
Packaging Dimension (LxWxH) tube 520.0 x 16.5 x 9.0mm
Packaging Quantity tube 25pcs
Storage Temperature Range -55°C to +125°C
Storage Humidity non-condensing 95% RH max.
Pinning information
Pin # Single Dual
1 +Vin +Vin
2 -Vin -Vin
5 -Vout -Vout
6 no pin Com
7 +Vout +Vout
Tolerance:
xx.x= ±0.5mm
xx.xx= ±0.25mm
Bottom View
0.5
1.27
10.2
0.5+0.10/-0.05 0.25±0.05
7.05
19.65
embossed Logo
6 x 2.54 =15.24
4 x 2.54 = 10.16
2.00
12 567
2.54
2.54
4.10
Bottom View
1 2 5 7
Marking
Top View
12 567
Dimension Drawing (mm)
Recommended Footprint Details