3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″ .100″ Latch/Ejector Header
4 Wall, Straight & Right Angle, High Temp Option
19
TS-0772-02
Sheet 1 of 4
Military (with 3M’s 3518 polarizing key) and
centerbump polarization
Optional ejector latches
Mounting holes for securing header to board
Solder tail and wrap tail options
Optional polarizing posts
High temperature option
Date Modified: October 19, 1999
Physical
Insulation
Material: Glass Filled Polyester (PBT)
Glass Filled Polyester (PCT — High Temp Option)
Flammability: UL 94V-0
Color: Gray, Standard
Beige (High Temp Option)
Marking: 3M Logo, Part Identification Number and Orientation Triangle
Contact
Material: Copper Alloy
Plating
Underplate: 100 µ″ [ 2.54 µm ] Nickel — QQ-N-290, Class 2
Wiping Area: Gold — MIL-G-45204, Type II, Grade C
Solder Tails: 200 µ″ [ 5.08 µm ] 60/40 Tin Lead — MIL-P-81728
Wrap Tails: Gold Flash, Standard
Electrical
Current Rating: 1 A
Insulation Resistance: >1 × 109 Ω at 500 Vdc
Withstanding Voltage: 1000 Vrms at Sea Level
Environmental
Temperatur e Rating: –55°C to +105°C
High Temp Process Rating: Maximum 235°C, with 90 seconds over 215°C
UL File No.: E68080
3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″ .100″ Latch/Ejector Header
4 Wall, Straight & Right Angle, High Temp Option
.424 ± .010
[ 10.77 ]
.025 ± .002 Sq Typ
[ 0.64 ]
.573 ± .010
[ 14.55 ]
-X0XX
Header with No
Ejector/Latch
-X5XX
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
-X6XX
Header with
Long Ejector/Latch
for 3M Sockets with
Strain Relief
-X4XX
Header with
Ejector only
.08
[2.0]
.97 Ref
[24.6]
1.07 Ref
[27.2] 1.07 Ref
[27.2]
.08
[2.0]
D
.020
[0.51]
.12
[3.0] Position 1
.100 Ref
[2.54]
.28
[7.1]
.25
[6.4]
.34
[8.3]
Position 1
Orientation
Triangle
.21
[5.3]
.24
[6.1]
.30
[7.6]
F Typ
E±.010
.049 Ref
[1.24]
.100 Ref
[2.54]
2X .100
[2.54]
(See Note 2) A
C
.16
[4.1]
.197
[5.00]
.20
[5.1]
.12
[3.0]
Notch C
(See Table 1 & Note 1)
Notch B
(See Table 1)
Notch A
(See Table 1 & Note1)
B
B
Section B–B
Note: This Ejector is a Nickel
Plated Zinc Alloy Casting.
.100 Ref
[2.54]
(Right Angle)
.68
[17.3]
.35
[8.9]
.020
[0.51]
A
A
F Typ
Section A–A
(Straight)
E±.010
.30
[7.6]
.24
[6.1]
.025 ± .002 Sq Typ
[ 0.64 ]
TS-0772-02
Sheet 2 of 4
B
2X .100
[2.54]
(See Note 2)
.37 Ref
[9.4] .46 Ref
[11.7] .42 Ref
[10.7]
“Y”
C
L
C
L“Y”
3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″ .100″ Latch/Ejector Header
4 Wall, Straight & Right Angle, High Temp Option
Table 1
Pin 3M Part Dimensions Polarization
Pn
Quantity
3M
Part
Number A B C D
Polar zat on
Notches Provided
10 3793 1.26 [32.1] 1.105 [28.07] .865 [21.97] .71 [18.0] B C
14 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] .91 [23.1] B C
16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] A B C
20 3428 1.76 [44.8] 1.605 [40.77] 1.365 [34.67] 1.21 [30.7] A B C
24 3627 1.96 [49.8] 1.805 [45.85] 1.565 [39.75] 1.41 [35.8] A B C
26 3429 2.06 [52.4] 1.905 [48.39] 1.665 [42.29] 1.51 [38.3] A B C
30 3440 2.26 [57.4] 2.105 [53.47] 1.865 [47.37] 1.71 43.43] A B C
34 3431 2.46 [62.6] 2.305 [58.55] 2.065 [52.45] 1.91 [48.5] A B C
40 3432 2.76 [70.2] 2.605 [66.17] 2.365 [60.07] 2.21 [56.1] A B C
50 3433 3.26 [82.9] 3.105 [78.87] 2.865 [72.77] 2.71 [68.8] A B C
60 3372 3.76 [95.6] 3.605 [91.57] 3.365 [85.47] 3.21 [81.5] A B C
64 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] A B C
Table 2
3M Part
CttT
i
l
D
ii
E
Pin Cr oss Section
D
ii
G
3M
Part
Number Suffix Contact Tail Dimension E Dimension F Diagonals Corner Radii Dimension G
-5XX2
-6XX2
Solder Tail for
.062 [1.57]
Thick PC Board
.112
[2.84] 0.0245 ±.0005
[0.622] 0.028 ±.001
[0.71] 0.0075 Ref
[0.191] .035 ±.003
[0.89] (See Note 3)
-5X03
-6X03
Solder Tail for
.094 [2.39] to
.125 [3.18]
Thick PC Board
.155
[3.94] 0.0245 ±.0005
[0.622] 0.028 ±.001
[0.71] 0.0075 Ref
[0.191] .035 ±.003
[0.89]
-5X05
-6X05 Wire Wrap Tail for up to
3 Levels of Wire Wrap .61 Ref
[15.5] 0.0250 ±.002
[0.635] 0.035 ±.003
[0.90] 0.003 Max
[0.08] .045 ±.003
[1.14]
C
L
”Y”
.41
[10.4]
Max to Edge of PCB
for Daisy Chain
.106
[2.69] or .116
[2.95]
(See Note 2)
G Dia
.029
[0.74]
.100 ±.003
[2.54]
Position 1
.232
[5.89]
C
Recommended Mounting Hole Pattern
(Right Angle)
.100 ±.003
[2.54]
.106
[2.69] or .116
[2.95]
(See Note 2)
G Dia
Position 1
.100 ±.003
[2.54]
.100 ±.003
[2.54]
.060
[1.52]
.300
[7.62]
Side to Side Stackability
B
Recommended Mounting Hole Pattern
(Straight)
.352
[8.94]
Notes:
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518).
2. Accepts Rear and Front mounting hardware:
Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole
Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6,
.106 [2.69] dia mounting hole
3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ±.002.
Refer to TS-0972 for the positions kinked.
Inch
[mm]
± .005± .1 ± .01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
TS-0772-02
Sheet 3 of 4
C
L“Y”
3M Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000 For technical, sales or ordering information call
800-225-5373
.100″ .100″ Latch/Ejector Header
4 Wall, Straight & Right Angle, High Temp Option
Ordering Information
XXXXX-XXXX
3M Part Number
(See Table 1)
Shroud and Pin Configuration
5 = 4 Wall, Right Angle
6 = 4 Wall, Straight
Latch/Ejector System
0 = No Latch/Ejector
4 = Roll Pin Ejectors
(3M Part # 3505-4)
5 = Short, Snap-In Latch/Ejectors,
(3M Part # 3505-30)
6 = Long, Snap-In Latch/Ejectors
(3M Part # 3505-31)
30 Microinches Gold Plated Product
Tail
02 =Solder Tail for .062 [1.57] Thick Board
K2=Kinked Solder Tails for .062 [1.57]
Thick Board
03 =Solder Tails for .094 to .125 [2.39 to 3.18]
Thick Board
05 = W rap Posts for up to 3 levels of Wire Wrap
(Not available on High Temp version.)
XXXXX-XXXXUG
Shroud and Pin Configuration
5 = 4 Wall, Right Angle
6 = 4 Wall, Straight
Latch/Ejector System
0 = No Latch/Ejector
5 = Short, Snap In Latch/Ejectors
(3M Part #3505-30)
6 = Long, Snap In Latch/Ejectors
(3M Part #3505-31)
15 Microinches Gold Plated Product
Tail
02 =Solder Tail for .062 [1.57] Thick Board
K2=Kinked Solder Tails for .062 [1.57]
Thick Board
03 =Solder Tails for .094 to .125 [2.39 to 3.18]
Thick Board
3M Part Number
(See Table 1)
Plating Suffix
UG = 15 microinch Gold
TS-0772-02
Sheet 4 of 4
Product Material:
N = High Temp
Blank = Standard
Product Material:
N = High Temp
Blank = Standard
