CORPORATION ISSUED DATE :2006/02/17 REVISED DATE : G L L M 3 1 7L 1 0 0 m A A D J U S T A B L E V O L T A G E R E G U L AT O R Description The GLLM317L is a monolithic integral circuit, designed for use as positive adjustable voltage regulator. It is designed to supply unit 100mA of load current with an output voltage adjustable over a 1.25V to 37V range. Features Output voltage adjustable from 1.25V to 37V Output current in excess of 100mA Thermal overload protection Short circuit protection Output transistor save area compensation Floating operation for high voltage applications Package Dimensions SOT-223 REF. A C D E I H Millimeter Min. Max. 6.70 7.30 2.90 3.10 0.02 0.10 0 10 0.60 0.80 0.25 0.35 REF. B J 1 2 3 4 5 Millimeter Min. Max. 13 TYP. 2.30 REF. 6.30 6.70 6.70 6.30 3.30 3.70 3.30 3.70 1.40 1.80 Block Diagram Test Circuit GLLM317L GLLM317L Page: 1/3 CORPORATION ISSUED DATE :2006/02/17 REVISED DATE : Absolute Maximum Ratings at Ta = 25 Parameter Input-Output Voltage Difference Symbol Ratings Unit VIN - VOUT 40 V W Power Dissipation PD 1 Junction Temperature TJ +125 Operating Junction Temperature TOPR 0 ~ +70 Storage Temperature Range TSTR -40 ~ +150 Note 1. Absolute maximum ratings are those values beyond witch the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The device is guaranteed to meet performance specification within 0 ~ 70 operating temperature range and assured by design from -20 Electrical Characteristics (VIN - VOUT=5V, 0 TJ 125 , IO=40mA, unless otherwise specified) Parameter Line Regulation Load Regulation Adjustable Pin Current Adjustable Pin Current Change Reference Voltage Symbol REGLINE REGLOAD Min TJ=25 VIN -VOUT=3~40V IO<20mA 0 IO=5~100mA VOUT 5V 0 IO=5~100mA VOUT 5V 0 TJ Unit - 0.01 0.04 %/V 0.02 0.07 %/V - 5 25 125 - 20 70 - 0.1 0.5 125 - 0.3 1.5 TJ=25 TJ Max - TJ=25 TJ TYP 125 IADJ mV %/VOUT - 50 100 A IADJ VIN -VOUT=3~40V IO=5~100mA, PD < 625mW - 0.2 5 A VREF VIN -VOUT=3~40V IO=5~100mA, PD < 625mW 1.2 1.25 1.3 V - 0.7 - % 5 mA - mA %/VOUT Output Voltage Temperature Stability VOUT/VOUT Minimum Load Current ILOAD(Min) Maximum Output Current Test Conditions IOUT(Max) VIN -VOUT=40V - 3.5 VIN -VOUT=3~13V 100 200 VIN -VOUT=40V 25 50 - 0.003 - - 65 - 66 80 - Output Noise Voltage (% of VOUT) eN f=10Hz ~ 10KHz, TJ=25 Ripple Rejection RR TJ=25 , f=120Hz CADJ=0 CADJ=10uF dB Note: CADJ is connected between Adjust pin and Ground. Characteristics Curve GLLM317L Page: 2/3 CORPORATION ISSUED DATE :2006/02/17 REVISED DATE : Application Information and Circuits The GLLM317L provides an internal reference voltage of 1.25V between the output and adjustments terminals. This is used to set a constant current flow across an external resistor driver, giving an output voltage VOUT of: VOUT = VREF * (1 + R2 / R1) + IADJ * R2 The device is designed to minimize the term IADJ (100uA max) and to maintain it very constant with line and load charges. Usually, the error term IADJ*R2 can be neglected. To obtain the previous requirement, all the regulator quiescent current is returned to the output terminal, imposing a minimum load current condition. If the load is insufficient, the output voltage will rise. The GLLM317L is a floating regulator, input-output differential voltage, supplies of very high voltage with respect to ground can be regulated as long as the maximum input-output differential is not exceeded. Furthermore, programmable regulators are easily obtainable and, by connecting a fixed resistor between the adjustment and output, the device can be used as a precision current regulator. GLLM317L Fig 1. Basic Adjustable Regulator GLLM317L Fig 3. Slow Turn-On 15V Regulator GLLM317L Fig 2. Voltage Regulator with Protection Diodes GLLM317L Fig 4. 5V Electronic Shut-Down Regulator Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GLLM317L Page: 3/3