Datasheet picoPak MC5O Solenoid Driver The picoPak MC5O is a compact DC solid state relay designed specifically for 24Vdc solenoid applications. The extra low on-state resistance allows for a high current rating in a package just 6mm wide. Features: * Ultra compact 6mm housing * 10A @ 5-34Vdc resistive, 6A inductive switch * Combifoot mounting: TS32 & TS35 DIN rails * 4000V isolation * LED status indication * Input diode protection * Load EMF protected * CE marked * CSA certified, Class 1 Division 2, Groups A, B, C, D United States Canada Mexico Weidmuller Inc. Weidmuller Ltd. Weidmuller, S.A. de C.V. 821 Southlake Blvd. 10 Spy Court 5 Sur No. 4311 Richmond, Virginia 23236 Markham, Ontario L3R 5H6 Col. Huexotitla Telephone: (800) 849-9343 Telephone: (800) 268-4080 72534 Puebla, Pue. Mexico Facsimile: (804) 379-2593 Facsimile: (905) 475-2798 Telephone: (22) 37 2549 Email: info@weidmuller.com Email: info1@weidmuller.ca Facsimile: (22) 43 1981 Website: www.weidmuller.com Website: www.weidmuller.ca Email: weidmull@acnet.net 3/11 picoPak MC5O Power Supply MC5O Output 5-34VDC Input out 24V + _ V+ Load 0V 0V Rated data Input 24Vdc Input voltage range 11.5 to 28Vdc Nominal Operating current (typical) 5.0mA @ 24Vdc Output high side MOSFET switch (sourcing) Output resistance (on state) less than 10mM Nominal switching voltage 5 to 34Vdc Max. Continuous current 10A resistive, 6A inductive Operate time (at nom. voltage) 1mS approx. Release time (at nom. voltage) 1mS max. Max. operating speed (50% mark space ratio) 50Hz (3000 operations per minute) Operating temperature range -40...+60 C General Isolation surge strength 4000V Dimensions terminal width 6mm width across rail 68mm / 63mm / 70.5mm Conductor size solid 0.5...4.0mm (24-12AWG) flexible 0.5...2.5mm (24-14AWG) Fuse/Circuit Breakers (recommended) 20A (65V) Slow Blow, breaking capacity 150A Approvals CE marked, CSA certified, Class 1 Division 2, Groups A, B, C, D EMC EN50081-1, EN50082-2 Installation To be installed and maintained by qualified personnel as per instructions, or module safety may be compromised. Designed for IEC664 Installation Category II use. Cleaning Wipe only with a damp cloth moistened with water (de-energise before cleaning). Ordering data Cat.No. picoPak MC5O 7901690001 End Plate AP C9039986 End Brackets EW (for TS35)/EWK (for TS32) 038356 0000 / 020616 0000 Cross connection insulated 2 pole 048270 0000 3 pole 048280 0000 4 pole 048290 0000 Cross connection uninsulated 75 pole straight 053520 0000 angled 052640 0000 Insulation profile 75 pole 2 76mm Height on rail TS32 / TS35 x 7.5 / TS35 x 15 052670 0000 Subject to technical changes * Printed in Canada * 99990162 * 05/2002 3/12