MBR2560CT, MBRF2560CT, MBRB2560CT
www.vishay.com Vishay General Semiconductor
Revision: 27-Nov-17 1Document Number: 87593
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Dual Common Cathode Schottky Rectifier
FEATURES
• Power pack
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for D2PAK (TO-263AB) package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, or polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, D2PAK (TO-263AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 2 x 12.5 A
VRRM 60 V
IFSM 150 A
VF0.65 V at 15 A
TJ max. 150 °C
Package TO-220AB, ITO-220AB, D2PAK
(TO-263AB)
Diode variation Common cathode
CASE
PIN 2
PIN 1
PIN 3
TO-220AB
MBR2560CT
ITO-220AB
MBRF2560CT
MBRB2560CT
PIN 1
PIN 2
K
HEATSINK
1
23
1
2
K
D2PAK (TO-263AB)
PIN 2
PIN 1
PIN 3
123
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBR2560CT UNIT
Maximum repetitive peak reverse voltage VRRM 60
VWorking peak reverse voltage VRWM 60
Maximum DC blocking voltage VDC 60
Maximum average forward rectified current
at TC = 130 °C
total device IF(AV)
25 A
per diode 12.5
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load per diode IFSM 150
A
Peak repetitive reverse surge current per diode
at tp = 2 μs, 1 kHz IRRM 0.5
Peak non-repetitive reverse energy (8/20 μs waveform)
per diode ERSM 25 mJ
Electrostatic discharge capacitor voltage human body model: C = 100 pF,
R = 1.5 kVC25 kV
Voltage rate of change (rated VR) dV/dt 10 000 V/μs
Operating junction temperature range TJ-65 to +150 °C
Storage temperature range TSTG -65 to +175
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V