1N4099-1 thru 1N4135-1 & 1N4614-1 thru 1N4627-1 Low Noise Zener Diode Series Rev. V6 Features * Available in JAN, JANTX, JANTXV and JANS per MIL-PRF-19500/435 * Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively. * 500 mW power handling * Hermetically sealed axial-leaded glass DO-35 package. * Also available in DO-213 MELF style package. Electrical Specifications: TA = +25C (unless otherwise specified) JEDEC TYPE No. (Note1) 1N4099-1 1N4100-1 1N4101-1 1N4102-1 1N4103-1 1N4104-1 1N4105-1 1N4106-1 1N4107-1 1N4108-1 1N4109-1 1N4110-1 1N4111-1 1N4112-1 1N4113-1 1N4114-1 1N4115-1 1N4116-1 1N4117-1 1N4118-1 1N4119-1 1N4120-1 Normal Zener Voltage VZ @ IZT Zener Test Current IZT Maximum Zener Impedance ZZT Volts 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 A 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Ohms 200 200 200 200 200 200 200 200 200 200 100 100 100 100 150 150 150 150 150 150 200 200 Maximum Reverse Current IR @ VR A 1.0 1.0 0.5 0.5 0.5 0.5 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Volts 5.2 5.7 6.3 6.7 7.0 7.6 8.5 9.2 9.9 10.7 11.4 12.2 13.0 13.7 14.5 15.2 16.8 18.3 19.0 20.5 21.3 22.8 Maximum Noise Density ND @ IZT Maximum Zener Current IZM V/Sqrt (Hz) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 mA 56 51 46 44 42 38 35 32 29 27 25 24 22 21 20 19 17 16 15 14 14 13 (Continued next page) 1 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: info@vptcomponents.com 1N4099-1 thru 1N4135-1 & 1N4614-1 thru 1N4627-1 Low Noise Zener Diode Series Rev. V6 Electrical Specifications: TA = +25C (unless otherwise specified) JEDEC TYPE No. (Note1) 1N4121-1 1N4122-1 1N4123-1 1N4124-1 1N4125-1 1N4126-1 1N4127-1 1N4128-1 1N4129-1 1N4130-1 1N4131-1 1N4132-1 1N4133-1 1N4134-1 1N4135-1 1N4614-1 1N4615-1 1N4616-1 1N4617-1 1N4618-1 1N4619-1 1N4620-1 1N4621-1 1N4622-1 1N4623-1 1N4624-1 1N4625-1 1N4626-1 1N4627-1 Normal Zener Voltage VZ @ IZT Zener Test Current IZT Maximum Zener Impedance ZZT Volts 33 36 39 43 47 51 56 60 62 68 75 82 87 91 100 1.8 2 2.2 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 A 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Ohms 200 200 200 250 250 300 300 400 500 700 700 800 1000 1200 1500 1200 1250 1300 1400 1500 1600 1650 1700 1650 1600 1550 1500 1400 1200 Maximum Reverse Current IR @ VR A 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 3.5 2.5 2.0 1.0 0.5 0.4 3.5 3.5 2.5 2.0 5.0 5.0 5.0 5.0 Volts 25.1 27.4 29.7 32.7 35.8 38.8 42.6 45.6 47.1 51.7 57.0 62.4 66.2 69.2 76.0 1 1 1 1 1 1 1.5 2 2 2 3 3 4 5 Maximum Noise Density ND @ IZT Maximum Zener Current IZM V/Sqrt (Hz) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 1 1 1 1 1 1 1 1 1 1 1 2 4 5 mA 12 11 9.8 8.9 8.1 7.5 6.7 6.4 6.1 5.6 5.1 4.6 4.4 4.2 3.8 120 110 100 95 90 87 85 83 80 77 75 70 65 61 1. The JEDEC type numbers shown with no suffix have a standard tolerance of +5% on the nominal Zener voltage; suffix C is used to identify +2%: and suffix D is used identify +1% tolerance. Vz is measured with the diode in thermal equilibrium in 25C still air. Absolute Maximum Ratings Steady State Power Dissipation 0.5 W Forward Voltage 1.1 V @ 200 mA Thermal Resistance 250C/W Operating & Storage Temperature -65C to +175C 2 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: info@vptcomponents.com 1N4099-1 thru 1N4135-1 & 1N4614-1 thru 1N4627-1 Low Noise Zener Diode Series Rev. V6 Circuit (-) Battery Power Supply (low noise source) Noise Density (ND), is specified in microvolt-rms per square-root-hertz. Actual measurement is performed using a 1 KHz to 3 KHz frequency bandpass filter at a constant Zener test current (IZT) at +25C TA. ND is calculated from the formula. Shielded Test Circuit (+) DC Blocking Capacitor RLOAD A Amplifier Filter FO - 2 KHz BP - 1 to 3 KHz VNOISE True RMS Volt Meter Graphs Power Derating vs. Lead Temperature Capacitance vs. Zener Voltage 200 180 *TA on FR4 PC Board Lead Temperature 400 160 Capacitance (pF) Rated Power Dissipation (mW) 500 300 200 100 @0V @ -2 V 140 120 100 80 60 40 20 0 0 25 50 75 100 125 Lead Temperature (C) 150 175 200 0 0 20 40 60 Zener Voltage (VZ) 3 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: info@vptcomponents.com 80 100 1N4099-1 thru 1N4135-1 & 1N4614-1 thru 1N4627-1 Low Noise Zener Diode Series Rev. V6 Outline Drawing (DO-35) 4 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: info@vptcomponents.com 1N4099-1 thru 1N4135-1 & 1N4614-1 thru 1N4627-1 Low Noise Zener Diode Series Rev. V6 VPT COMPONENTS. ALL RIGHTS RESERVED. Information in this document is provided in connection with VPT Components products. These materials are provided by VPT Components as a service to its customers and may be used for informational purposes only. Except as provided in VPT Components Terms and Conditions of Sale for such products or in any separate agreement related to this document, VPT Components assumes no liability whatsoever. VPT Components assumes no responsibility for errors or omissions in these materials. VPT Components may make changes to specifications and product descriptions at any time, without notice. VPT Components makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF VPT COMPONENTS PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. VPT COMPONENTS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CON-TAINED WITHIN THESE MATERIALS. VPT COMPONENTS SHALL NOT BE LIABLE FOR ANY SPECIAL, IN-DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVE-NUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. VPT Components products are not intended for use in medical, lifesaving or life sustaining applications. VPT Components customers using or selling VPT Components products for use in such applications do so at their own risk and agree to fully indemnify VPT Components for any damages resulting from such improper use or sale. 5 VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.vptcomponents.com for additional data sheets and product information. For further information and support please visit: info@vptcomponents.com