Low Noise Zener Diode Series
Rev. V6
1N4099-1 thru 1N4135-1 &
1N4614-1 thru 1N4627-1
1
1
VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.vptcomponents.com for additional data sheets and product information.
For further information and support please visit:
info@vptcomponents.com
1
JEDEC TYPE
No.
(Note1)
Normal
Zener Voltage
VZ @ IZT
Zener Test
Current
IZT
Maximum
Zener Impedance
ZZT
Maximum
Reverse Current
IR @ VR
Maximum
Noise Density
ND @ IZT
Maximum
Zener Current
IZM
Volts µA Ohms µA Volts µV/Sqrt (Hz) mA
1N4099-1 6.8 250 200 1.0 5.2 40 56
1N4100-1 7.5 250 200 1.0 5.7 40 51
1N4101-1 8.2 250 200 0.5 6.3 40 46
1N4102-1 8.7 250 200 0.5 6.7 40 44
1N4103-1 9.1 250 200 0.5 7.0 40 42
1N4104-1 10 250 200 0.5 7.6 40 38
1N4105-1 11 250 200 0.05 8.5 40 35
1N4106-1 12 250 200 0.05 9.2 40 32
1N4107-1 13 250 200 0.05 9.9 40 29
1N4108-1 14 250 200 0.05 10.7 40 27
1N4109-1 15 250 100 0.05 11.4 40 25
1N4110-1 16 250 100 0.05 12.2 40 24
1N4111-1 17 250 100 0.05 13.0 40 22
1N4112-1 18 250 100 0.05 13.7 40 21
1N4113-1 19 250 150 0.05 14.5 40 20
1N4114-1 20 250 150 0.01 15.2 40 19
1N4115-1 22 250 150 0.01 16.8 40 17
1N4116-1 24 250 150 0.01 18.3 40 16
1N4117-1 25 250 150 0.01 19.0 40 15
1N4118-1 27 250 150 0.01 20.5 40 14
1N4119-1 28 250 200 0.01 21.3 40 14
1N4120-1 30 250 200 0.01 22.8 40 13
Features
• Available in JAN, JANTX, JANTXV and JANS per
MIL-PRF-19500/435
• Tight tolerances available in plus or minus 2% or
1% with C or D suffix respectively.
• 500 mW power handling
• Hermetically sealed axial-leaded glass DO-35
package.
• Also available in DO-213 MELF style package.
Electrical Specifications: TA = +25°C (unless otherwise specified)
(Continued next page)
Low Noise Zener Diode Series
Rev. V6
1N4099-1 thru 1N4135-1 &
1N4614-1 thru 1N4627-1
2
2
VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.vptcomponents.com for additional data sheets and product information.
For further information and support please visit:
info@vptcomponents.com
2
JEDEC TYPE
No.
(Note1)
Normal
Zener Voltage
VZ @ IZT
Zener Test
Current
IZT
Maximum
Zener Impedance
ZZT
Maximum
Reverse Current
IR @ VR
Maximum
Noise Density
ND @ IZT
Maximum
Zener Current
IZM
Volts µA Ohms µA Volts µV/Sqrt (Hz) mA
1N4121-1 33 250 200 0.01 25.1 40 12
1N4122-1 36 250 200 0.01 27.4 40 11
1N4123-1 39 250 200 0.01 29.7 40 9.8
1N4124-1 43 250 250 0.01 32.7 40 8.9
1N4125-1 47 250 250 0.01 35.8 40 8.1
1N4126-1 51 250 300 0.01 38.8 40 7.5
1N4127-1 56 250 300 0.01 42.6 40 6.7
1N4128-1 60 250 400 0.01 45.6 40 6.4
1N4129-1 62 250 500 0.01 47.1 40 6.1
1N4130-1 68 250 700 0.01 51.7 40 5.6
1N4131-1 75 250 700 0.01 57.0 40 5.1
1N4132-1 82 250 800 0.01 62.4 40 4.6
1N4133-1 87 250 1000 0.01 66.2 40 4.4
1N4134-1 91 250 1200 0.01 69.2 40 4.2
1N4135-1 100 250 1500 0.01 76.0 40 3.8
1N4614-1 1.8 250 1200 3.5 1 1 120
1N4615-1 2 250 1250 2.5 1 1 110
1N4616-1 2.2 250 1300 2.0 1 1 100
1N4617-1 2.4 250 1400 1.0 1 1 95
1N4618-1 2.7 250 1500 0.5 1 1 90
1N4619-1 3 250 1600 0.4 1 1 87
1N4620-1 3.3 250 1650 3.5 1.5 1 85
1N4621-1 3.6 250 1700 3.5 2 1 83
1N4622-1 3.9 250 1650 2.5 2 1 80
1N4623-1 4.3 250 1600 2.0 2 1 77
1N4624-1 4.7 250 1550 5.0 3 1 75
1N4625-1 5.1 250 1500 5.0 3 2 70
1N4626-1 5.6 250 1400 5.0 4 4 65
1N4627-1 6.2 250 1200 5.0 5 5 61
Electrical Specifications: TA = +25°C (unless otherwise specified)
1. The JEDEC type numbers shown with no suffix have a standard tolerance of +5% on the nominal Zener voltage; suffix C is used to identify
+2%: and suffix D is used identify +1% tolerance. Vz is measured with the diode in thermal equilibrium in 25°C still air.
Absolute Maximum Ratings
Steady State Power Dissipation 0.5 W
Forward Voltage 1.1 V @ 200 mA
Thermal Resistance 250°C/W
Operating & Storage Temperature -65°C to +175°C
Low Noise Zener Diode Series
Rev. V6
1N4099-1 thru 1N4135-1 &
1N4614-1 thru 1N4627-1
3
3
VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.vptcomponents.com for additional data sheets and product information.
For further information and support please visit:
info@vptcomponents.com
3
Circuit
0
100
200
300
400
500
025 50 75 100 125 150 175 200
*TA on FR4 PC Board
Lead Temperature
Rated Power Dissipation (mW)
Lead Temperature (°C)
0
20
40
60
80
100
120
140
160
180
200
020 40 60 80 100
@ 0 V
@ -2 V
Capacitance (pF)
Zener Voltage (VZ)
Power Derating vs. Lead Temperature Capacitance vs. Zener Voltage
True
RMS
Volt
Meter
Filter
FO - 2 KHz
BP - 1 to 3 KHz
VNOISE
Amplifier
DC
Blocking
Capacitor
Shielded
Test
Circuit
Battery
Power
Supply
(low noise
source)
(-) (+)
RLOAD
A
Graphs
Noise Density (ND), is specified in microvolt-rms per
square-root-hertz. Actual measurement is performed
using a 1 KHz to 3 KHz frequency bandpass filter at
a constant Zener test current (IZT) at +25°C TA. ND is
calculated from the formula.
Low Noise Zener Diode Series
Rev. V6
1N4099-1 thru 1N4135-1 &
1N4614-1 thru 1N4627-1
4
4
VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.vptcomponents.com for additional data sheets and product information.
For further information and support please visit:
info@vptcomponents.com
4
Outline Drawing (DO-35)
Low Noise Zener Diode Series
Rev. V6
1N4099-1 thru 1N4135-1 &
1N4614-1 thru 1N4627-1
5
5
VPT Components and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.vptcomponents.com for additional data sheets and product information.
For further information and support please visit:
info@vptcomponents.com
5
VPT COMPONENTS. ALL RIGHTS RESERVED.
Information in this document is provided in connection with VPT Components products. These materials are pro-
vided by VPT Components as a service to its customers and may be used for informational purposes only. Ex-
cept as provided in VPT Components Terms and Conditions of Sale for such products or in any separate agree-
ment related to this document, VPT Components assumes no liability whatsoever. VPT Components assumes
no responsibility for errors or omissions in these materials. VPT Components may make changes to specifica-
tions and product descriptions at any time, without notice. VPT Components makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF VPT COMPONENTS PRODUCTS INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCI-
DENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER
INTELLECTUAL PROPERTY RIGHT. VPT COMPONENTS FURTHER DOES NOT WARRANT THE ACCURA-
CY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CON-TAINED
WITHIN THESE MATERIALS. VPT COMPONENTS SHALL NOT BE LIABLE FOR ANY SPECIAL, IN-DIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVE-NUES
OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
VPT Components products are not intended for use in medical, lifesaving or life sustaining applications. VPT
Components customers using or selling VPT Components products for use in such applications do so at their
own risk and agree to fully indemnify VPT Components for any damages resulting from such improper use or
sale.
