PHASE CONTROL SCR
1
Bulletin I2136 04/97
SAFE
IR
Series
30TPS..
VT< 1.3V @ 20A
ITSM = 300A
V
RRM 800 to 1600V
Major Ratings and Characteristics
IT(AV) Sinusoidal 20 A
waveform
IRMS 30 A
VRRM/
VDRM up to 1600 V
ITSM 300 A
VT@ 20 A, TJ = 25°C 1.3 V
dv/dt 500 V/µs
di/dt 150 A/µs
TJ- 40 to 125 °C
Characteristics 30TPS.. Units
TO-247AC
Description/Features
The 30TPS.. SAFE
IR
series of silicon controlled
rectifiers are specifically designed for medium
power switching and phase control applications.
The glass passivation technology used has reli-
able operation up to 125°C junction temperature.
Typical applications are in input rectification (soft
start) and these products are designed to be used
with International Rectifier input diodes, switches
and output rectifiers which are available in identi-
cal package outlines.
Package Outline
2
30TPS.. SAFE
IR
Series
Bulletin I2136 04/97
Voltage Ratings
Part Number VRRM/VDRM, max. repetitive VRSM , maximum non repetitive IRRM/IDRM
peak and off-state voltage peak reverse voltage 125°C
VVmA
30TPS08 800 900 10
30TPS12 1200 1300
30TPS16 1600 1700
IT(AV) Max. Average On-state Current 20 A @ TC = 95° C, 180° conduction half sine wave
IRMS Max. RMS On-state Current 30
ITSM Max. Peak One Cycle Non-Repetitive 250 10ms Sine pulse, rated VRRM applied
Surge Current 300 10ms Sine pulse, no voltage reapplied
I2t Max. I2t for Fusing 310 A2s 10ms Sine pulse, rated VRRM applied
442 10ms Sine pulse, no voltage reapplied
I2√t Max. I2√t for Fusing 4420 A2√s t = 0.1 to 10ms, no voltage reapplied
VTM Max. On-state Voltage Drop 1.3 V @ 20A, TJ = 25°C
rtOn-state Slope Resistance 1 2 mΩTJ = 125°C
VT(TO) Threshold Voltage 1.0 V
IRM/IDMMax.Reverse and Direct 0.5 m A TJ = 25 °C
Leakage Current 1 0 TJ = 125 °C
IHMax. Holding Current 100 mA Anode Supply = 6V, Resistive load, Initial IT=1A
IL Max. Latching Current 200 mA Anode Supply = 6V, Resistive load
dv/dt Max. Rate of Rise of off-state Voltage 500 V/µs
di/dt Max. Rate of Rise of turned-on Current 150 A/µs
Absolute Maximum Ratings
Parameters 30TPS.. Units Conditions
VR = rated VRRM/ VDRM
3
30TPS.. SAFE
IR
Series
Bulletin I2136 04/97
Thermal-Mechanical Specifications
TJMax. Junction Temperature Range - 40 to 125 °C
Tstg Max. Storage Temperature Range - 4 0 to 1 25
RthJC Max. Thermal Resistance Junction 0.8 °C/W DC operation
to Case
RthJA Max. Thermal Resistance Junction 40
to Ambient
RthCS Max. Thermal Resistance Case 0.2 Mounting surface, smooth and greased
to Heatsink
wt Approximate Weight 6 (0.21) g (oz.)
T Mounting Torque Min. 6 (5) Kg-cm
Max. 12 (10) (lbf-in)
Case Style TO-247AC Jedec (Modified)
Parameters 30TPS.. Units Conditions
Triggering
PGM Max. Peak Gate Power 8.0 W
PG(AV)Max. Average Gate Power 2.0
+ IGM Max. Peak Positive Gate Current 1.5 A
- VGM Max. Peak Negative Gate Voltage 1 0 V
IGT Max. Required DC Gate Current 6 0 mA Anode supply = 6V, resistive load, TJ = - 10°C
to Trigger 4 5 Anode supply = 6V, resistive load, TJ = 25°C
20 Anode supply = 6V, resistive load, TJ = 125°C
VGT Max. Required DC Gate Voltage 2.5 V Anode supply = 6V, resistive load, TJ = - 10°C
to Trigger 2.0 Anode supply = 6V, resistive load, TJ = 25°C
1.0 Anode supply = 6V, resistive load, TJ = 125°C
VGD Max. DC Gate Voltage not to Trigger 0.25 TJ = 125°C, VDRM = rated value
IGD Max. DC Gate Current not to Trigger 2.0 mA TJ = 125°C, VDRM = rated value
Parameters 30TPS.. Units Conditions
Switching
Parameters 30TPS.. Units Conditions
tgt Typical Turn-on Time 0.9 µs TJ = 25°C
trr Typical Reverse Recovery Time 4 TJ = 125°C
tqTypical Turn-off Time 110
4
30TPS.. SAFE
IR
Series
Bulletin I2136 04/97
Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics
Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current
90
100
110
120
130
0 5 10 15 20 25
30°60° 90° 120° 180°
Maximum Allowable Ca se Temperature (°C)
Co nduc tion Angl e
A verage On-state Current (A)
30T PS.. S erie s
R (DC) = 0 .8 °C/W
thJC
80
90
100
110
120
130
0 5 10 15 20 25 30 35
DC
30°60° 90°
120°180°
Ave rage O n-st ate Current (A )
Maximum Allow able Case Temperature (°C)
C onduction Per iod
30TPS.. Series
R (DC) = 0.8 °C/W
thJC
0
10
20
30
40
50
60
0 5 10 15 20 25 30
RMS Limit
Con ducti on An g le
Max imu m Avera ge On-state Power Lo ss (W)
Av er ag e On- s tate Cu rr en t (A)
180°
120°
90°
60°
30°
30TPS.. Series
T = 125° C
J
0
20
40
60
80
0 1020304050
DC
180°
120°
90°
60°
30°
RMS Limit
Conduction Period
M a x imum Avera ge On-s t a te P ow er Lo s s (W)
Avera g e On - s ta te C ur r en t (A )
30TP S.. Ser ies
T = 125°C
J
120
140
160
180
200
220
240
260
280
1 10 100
Number Of Equal Amplitude Half Cycle Curre nt Pulse s (N )
At Any Rated Load Condition And With
Rated V Applied Following Surge.
RRM
Pe ak Half Sine W ave On-st ate C ur ren t (A)
Initial T = 125°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
30 TPS.. Series
120
140
160
180
200
220
240
260
280
300
0.01 0.1 1
Peak Half Sine Wave On-state Current (A)
Pulse Train Duration (s)
Versus Pu lse Train D urat ion. Cont rol
Of Conduction May Not Be Maintained.
I nitia l T = 12 5 °C
No Voltage Reapplied
Rat ed V Reapplied
RRM
J
30TPS.. Ser ies
Ma ximum N on Repe t itive Surg e Curre nt
5
30TPS.. SAFE
IR
Series
Bulletin I2136 04/97
Fig. 7 - On-state Voltage Drop Characteristics
Fig. 9 - GateCharacteristics
Fig. 8 - Thermal Impedance ZthJC Characteristics
1
10
100
1000
01234567
T = 25°C
J
Instantaneous On-state C ur r e nt (A)
In s ta n ta neou s On - s ta te Voltag e (V)
T = 125°C
J
30TP S .. Series
0.01
0.1
1
0.0001 0.001 0.01 0.1 1
Sq uar e Wav e Pulse Du rat ion (s)
Steady Stat e V alue
(DC Ope rati on)
Single Pulse
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
30TPS.. Series
Transien t Thermal Impedance Z (°C/W)
thJC
0.1
1
10
100
0.001 0.01 0.1 1 10 100
(b) (a)
(4) (3) (2) (1)
Instantaneous Gate Curre nt (A)
Instantaneous Gate Voltage (V)
TJ = 25 °C
TJ = 125 °C
Fre quency Limited by PG(AV)
TJ = -10 °C
IGD
VGD
30T P S. . Se r ie s
tr = 1 µs, tp >= 6 µs
<= 30% rated di/dt: 10 V, 65 ohms
b)Recommended load line for
rated di/dt: 10 V , 20 ohms
tr = 0.5 µs, tp >= 6 µs
a)Re commended load line for
Rectangular gat e pulse
(1) PG M = 40 W, tp = 1 ms
(2) PG M = 20 W, tp = 2 ms
(3) PG M = 8 W, tp = 5 m s
(4) PG M = 4 W, tp = 10 ms
6
30TPS.. SAFE
IR
Series
Bulletin I2136 04/97
Outline Table
Dimensions in millimeters and inches
15 . 9 0 (0.6 26)
15 . 3 0 (0.6 02)
14.2 0 (0 . 55 9 )
14 . 8 0 ( 0 . 583)
3. 70 (0 .145)
4. 30 (0 .170)
5.30 (0.208)
5.70 (0.22 5)
5.50 ( 0.217)
4 .50 ( 0 . 177)
(2 PLCS.)
3. 55 (0 .139)
3. 65 (0 .144)
2.20 (0.08 7)
MAX.
1. 00 (0 .039)
1. 40 (0 .056)
0. 40 (0 .213)
0. 8 0 ( 0 .0 32)
4.70 ( 0.185)
5.30 (0.20 9)
1.5 (0.059)
2.5 (0.098)
2. 40 (0 .095)
MAX.
10. 86 (0 .42 7 )
10 .94 ( 0. 43 0)
20.3 0 ( 0 . 80 0 )
19.7 0 ( 0 . 77 5 )
DIA.
123
Ordering Information Table
30 T P S 16
Device Code
1524
3
1- Current Rating
2- Circuit Configuration:
T = Thyristor
3- Package:
T = TO-247
4- Type of Silicon:
S = Standard Recovery Rectifier
5- Voltage code: Code x 100 = VRRM
(G) 3
2
(A)
1 (K)
08 = 800V
12 = 1200V
16 = 1600V
