PRODUCT DATASHEET Leila series last update 25/5/2012 Ordering number FCN11257_LO1-RS Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Pack Golden Dragon+ White 21.6 mm 14.6 mm Round PMMA PC Glue On production FWHM Efficiency cd/lm Gerber File 7 degrees Available FWHM Efficiency cd/lm Gerber File 11 degrees Available FWHM Efficiency cd/lm Gerber File 26 degrees Available FWHM Efficiency cd/lm Gerber File 28 degrees 95 % 3.300 Available Ordering number FCN11259_LO1-D Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Pack Golden Dragon+ White 21.6 mm 14.6 mm Round PMMA PC Glue On production Ordering number FCN11258_LO1-M Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Pack Golden Dragon+ White 21.6 mm 14.6 mm Round PMMA PC Glue On production Ordering number FCN11466_LO1-M2 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Pack Golden Dragon+ White 21.6 mm 14.6 mm Round PMMA PC Glue On production June 10th 2014 20:10 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Leila series last update 25/5/2012 Ordering number FCN11262_LO1-REC Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Pack Golden Dragon+ White 21.6 mm 14.6 mm Round PMMA PC Glue On production FWHM Efficiency cd/lm Gerber File 38+24 degrees Available FWHM Efficiency cd/lm Gerber File 41+12 degrees Available Ordering number FCN11260_LO1-O Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Pack Golden Dragon+ White 21.6 mm 14.6 mm Round PMMA PC Glue On production NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. June 10th 2014 20:10 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Leila series last update 25/5/2012 GENERAL INFORMATION - Product series especially designed & optimized for Golden Dragon+ series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf - Optic holder molded by high quality PC material (120 dergees of Celcius / 248 degrees of Fahrenheit). - Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glue options. http://www.ledil.com/datasheets/DataSheet_GLUES.pdf NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end product. For example, mechanical stress, vibration and holes on the surface of the circuit boar weaken the strength of the glue. NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. If cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED manufacturer -this is important as cleaning shall under no circumstances damage LEDs or other electronics components on the PCB. Further note that optical components shall not be cleaned with any chemicals - only micro fiber cloth may be used to remove fingerprints or other traces from handling. June 10th 2014 20:10 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 A B C D LO1-O beam direction 4 4 3 14.6 Led longer side direction 3 Section view A-A Scale: 2:1 . 21 6 2 2 A A Isometric view Scale: 1:1 Top view Scale: 2:1 1 This drawing is our property. It can't be reproduced or communicated without our written agreement. DRAWN BY DATE CHECKED BY DATE DESIGNED BY DATE Led Teh FIN Fin DRAWING TITLE PV 12.3.2012 sn 09.3.2012 HH 30.04.2008 D SIZE DATASHEET LO1 Series DRAWING NUMBER REV 2 A4 SCALE 2:1 WEIGHT(g) SHEET A 1/1 1