PRODUCT DATASHEET
Leila series
last update 25/5/2012
Ordering number
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
FCN11257_LO1-RS
Leila
Pack
Golden Dragon+
White
21.6 mm
14.6 mm
Round
PMMA
PC
Glue
On production
FWHM
Efficiency
cd/lm
Gerber File
7 degrees
-
-
Available
Ordering number
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
FCN11259_LO1-D
Leila
Pack
Golden Dragon+
White
21.6 mm
14.6 mm
Round
PMMA
PC
Glue
On production
FWHM
Efficiency
cd/lm
Gerber File
11 degrees
-
-
Available
Ordering number
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
FCN11258_LO1-M
Leila
Pack
Golden Dragon+
White
21.6 mm
14.6 mm
Round
PMMA
PC
Glue
On production
FWHM
Efficiency
cd/lm
Gerber File
26 degrees
-
-
Available
Ordering number
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
FCN11466_LO1-M2
Leila
Pack
Golden Dragon+
White
21.6 mm
14.6 mm
Round
PMMA
PC
Glue
On production
FWHM
Efficiency
cd/lm
Gerber File
28 degrees
95 %
3.300
Available
June 10th 2014 20:10 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Leila series
last update 25/5/2012
Ordering number
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
FCN11262_LO1-REC
Leila
Pack
Golden Dragon+
White
21.6 mm
14.6 mm
Round
PMMA
PC
Glue
On production
FWHM
Efficiency
cd/lm
Gerber File
38+24 degrees
-
-
Available
Ordering number
Family
Type
LED
Color
Diameter
Height
Style
Optic Material
Holder Material
Fastening
Status
FCN11260_LO1-O
Leila
Pack
Golden Dragon+
White
21.6 mm
14.6 mm
Round
PMMA
PC
Glue
On production
FWHM
Efficiency
cd/lm
Gerber File
41+12 degrees
-
-
Available
NOTE: The typical divergence will be changed by different color, chip size and chip position
tolerance. The typical total divergence is the full angle measured where the luminous intensity
is half of the peak value.
June 10th 2014 20:10 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
PRODUCT DATASHEET
Leila series
last update 25/5/2012
GENERAL INFORMATION
- Product series especially designed & optimized for Golden Dragon+ series of LEDs.
- Special care taken to make light distribution as uniform as possible.
- Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current and
temperature conditions.
Please find more information about used material from below:
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf
http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf
- Optic holder molded by high quality PC material (120 dergees of Celcius / 248 degrees of Fahrenheit).
- Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glue
options.
http://www.ledil.com/datasheets/DataSheet_GLUES.pdf
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the end
product. For example, mechanical stress, vibration and holes on the surface of the circuit boar
weaken the strength of the glue.
NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. If
cleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LED
manufacturer -this is important as cleaning shall under no circumstances damage LEDs or other
electronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fiber
cloth may be used to remove fingerprints or other traces from handling.
June 10th 2014 20:10 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3
Ledil Oy
Salorankatu 10
24240 SALO
Finland
http://www.ledil.com
email: ledil@ledil.com
FAX: +358-2-733 8001
AD
B
C
A
D
32
3
2
41
4
1
DESIGNED BY
HH DATE
30.04.2008
CHECKED BY DATE
DRAWN BY
PV
DATE
This drawing is our property.
It can't be reproduced
or communicated without
our written agreement.
SCALE 2:1 WEIGHT(g) SHEET 1/1
SIZE
A4
DRAWING NUMBER REV
DRAWING TITLE DATASHEET LO1 Series
Ledil Oy
Tehdaskatu 13
FIN-24100 SALO
Finland
12.3.2012
2
sn
09.3.2012
Led longer side
direction
LO1-O beam direction
Top view
Scale: 2:1
21.6
A A
Section view A-A
Scale: 2:1
14.6
Isometric view
Scale: 1:1
