ZS2C2502H - AVX - Datasheet.Directory

Solder-In Style High Temp EMI Filters

ZS/ZR Series – .128 Dia. – Circuits Available – C & L

The ZS series provides effective filtering

in the MICROWAVE frequency spectrum

from 10 MHz through 26 GHz. Designed

to be soldered into a package, bracket or

bulkhead (and maintain hermeticity), it is

ideal for high impedance circuits where

large capacitance values are not practical.

In the “L” section version an internal fer-

rite bead element provides both induc-

tance and series resistance (lossy charac-

teristic) which improves insertion loss and

provides superior transient performance.

Alternate lead lengths or special capaci-

tance values may be ordered.

Custom packages or bracket assemblies

utilizing this feedthru can be furnished to

your specifications.

• Meets or exceeds the applicable portions

of MIL-F-28861/12. See QPL listings.

• High temperature construction with-

stands 300°C installation temperatures.

• Features rugged monolithic discoidal

capacitor construction.

• Glass hermetic seal on one end with

epoxy seal on the opposite end.

• High purity gold plating provides excel-

lent solderability or compatibility with

thermal and ultrasonic wire bonding.

1. Plating: Gold standard –

Silver and solder coat available

2. Material:

Case: Cold rolled steel

Leads: Alloy 52 steel

3. Operating Temperature Range:

-55°C to +125°C

4. Insulation Resistance:

At 25°C: 1,000 megohm-microfarad

min., or 100,000 megohms

min., whichever is less

At 125°C: 100 megohm-microfarad

min., or 10,000 megohms

min., whichever is less

5. Dielectric Withstanding Voltage (DWV):

R-level designs:

2.0 times rated DC voltage

Class B, Class S designs:

2.5 times rated DC voltage

6. DC Resistance (DCR): .01 ohm,

maximum

7. Dissipation Factor (DF): 3% maximum

8. Rated DC Current: 5 Amps, maximum

9. Maximum Installation Temperature:

300°C

10. Supplied with 60/40 solder preform for

easy installation

11. Insertion Loss for the “C” and “L” circuits

are equivalent due to the saturation

characteristic of the ferrite bead element

at full rated current. At lower currents the

“L” becomes much more effective.

SPECIFICATIONS

.128

±.005

.020

±.005

A.25

±.03

GLASS SEAL

.156

±.005

.030

±.002

0.05 (.002) 3.25 (.128)

0.13 (.005) 3.96 (.156)

0.51 (.020) 5.08 (.200)

0.76 (.030) 6.4 (.25)

0.8 (.03) 15.88 (.625)

2.79 (.110) 18.16 (.715)

Notes:

1. Outline drawing shows stan-

dard ZS configuration. Also

available with glass seal at

the opposite end, ZR reverse

configuration.

2. MIL-F-28861/12 style FS70

equivalent to standard ZS

configuration. Style FS71 is

reverse ZR configuration.

3. For ZS2 or ZR2 L-Section

Filters inductor always posi-

tioned at epoxy-filled end.

4. Metric equivalent dimensions

given for information only.

millimeters (inches)

ZS1, ZR1

CIRCUIT DIAGRAMS

STANDARD CONFIGURATION

ZS2 (See Note 3)

GLASS

SEAL

END

FLANGE

END

ZR2

GLASS

SEAL

END

FLANGE

END

CHARACTERISTICS

APPLICATIONS

Dimensions

Circuit A B

Diagram ±.005 Nom.

L.200 .715

C.110 .625

Dash No. Style

001 through 016, FS70

033 and 034

017 through 032, FS71

035 and 036

MIL-F-28861/12 (See Note 2)

(See Note 4)

Solder-In Style High Temp EMI Filters

ZS/ZR Series – .128 Dia. – Circuits Available – C & L

Insertion Loss2Per MIL-STD-220, +25°C

AVX Current DC CAP1500 1 10 100 1000 10

P/N AMP CKT Voltage Min. KHz MHz MHz MHz MHz GHz

ZS1C2-501H 5 C 50 500 – – – 15 30 50

ZS1C2-102H 5 C 50 1000 – – 4 20 31 55

ZS1C2-122H 5 C 50 1200 – – 5 20 35 55

ZS1C2-272H 5 C 50 2700 – – 10 25 40 60

ZS1C2-502H 5 C 50 5000 – – 15 30 45 60

ZS1C2-103H 5 C 50 .010 – 4 20 35 48 60

ZS1C2-153H 5 C 50 .015 – 7 25 40 50 60

ZS2C2-501H 5 L 50 500 – – – 15 30 50

ZS2C2-102H 5 L 50 1000 – – 4 20 33 55

ZS2C2-122H 5 L 50 1200 – – 5 20 37 55

ZS2C2-272H 5 L 50 2700 – – 10 25 40 60

ZS2C2-502H 5 L 50 5000 – – 15 30 45 60

ZS2C2-103H 5 L 50 .010 – 4 20 38 50 60

ZS2C2-153H 5 L 50 .015 – 7 25 42 50 60

ZS1A2-101H 5 C 100 100 – – – 3 20 30

ZS1A2-501H 5 C 100 500 – – – 15 30 50

ZS1A2-102H 5 C 100 1000 – – 4 20 31 55

ZS1A2-122H 5 C 100 1200 – – 5 20 35 55

ZS1A2-272H 5 C 100 2700 – – 10 25 40 60

ZS1A2-502H 5 C 100 5000 – – 15 30 45 60

ZS1A2-103H 5 C 100 .010 – 4 20 35 48 60

ZS1A2-153H 5 C 100 .015 – 7 25 40 50 60

ZS2A2-100H 5 L 100 10 ––––510

ZS2A2-250H 5 L 100 25 ––––1015

ZS2A2-101H 5 L 100 100 – – – 3 20 30

ZS2A2-501H 5 L 100 500 – – – 15 30 50

ZS2A2-102H 5 L 100 1000 – – 4 20 33 55

ZS2A2-122H 5 L 100 1200 – – 5 20 37 55

ZS2A2-272H 5 L 100 2700 – – 10 25 40 60

ZS2A2-502H 5 L 100 5000 – – 15 30 45 60

ZS2A2-103H 5 L 100 .010 – 4 20 38 50 60

ZS2A2-153H 5 L 100 .015 – 7 25 42 50 60

1Decimal point values indicate capacitance in microfarads.

Non-decimal point values indicate capacitance in picofarads.

2Insertion loss limits are based on theoretical values.

Actual measurements may vary due to internal capacitor

resonances and other design constraints.

NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal

opposite the flange end. All parts are capable of the reverse configuration with the glass

seal at the flange end. All parameters are otherwise identical. The part number changes

from “S” to “R” (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H).

For special multi-unit assemblies see Multi-Component Filter Brackets section.

SPECIFICATIONS

continued

Solder-In Style High Temp EMI Filters

ZS/ZR Series – .128 Dia. – Circuits Available – C & L

Insertion Loss2Per MIL-STD-220, +25°C

AVX Current DC CAP1500 1 10 100 1000 10

P/N AMP CKT Voltage Min. KHz MHz MHz MHz MHz GHz

ZS1B2-100H 5 C 200 10 ––––410

ZS1B2-250H 5 C 200 25 ––––1015

ZS1B2-101H 5 C 200 100 – – – 3 20 30

ZS1B2-501H 5 C 200 500 – – – 15 30 50

ZS1B2-102H 5 C 200 1000 – – 4 20 31 55

ZS1B2-122H 5 C 200 1200 – – 5 20 35 55

ZS1B2-272H 5 C 200 2700 – – 10 25 40 60

ZS2B2-100H 5 L 200 10 ––––510

ZS2B2-250H 5 L 200 25 ––––1015

ZS2B2-101H 5 L 200 100 – – – 3 20 30

ZS2B2-501H 5 L 200 500 – – – 15 30 50

ZS2B2-102H 5 L 200 1000 – – 4 20 33 55

ZS2B2-122H 5 L 200 1200 – – 5 20 37 55

ZS2B2-272H 5 L 200 2700 – – 10 25 40 60

SPECIFICATIONS

1Decimal point values indicate capacitance in microfarads.

Non-decimal point values indicate capacitance in picofarads.

2Insertion loss limits are based on theoretical values.

Actual measurements may vary due to internal capacitor

resonances and other design constraints.

NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal

opposite the flange end. All parts are capable of the reverse configuration with the glass

seal at the flange end. All parameters are otherwise identical. The part number changes

from “S” to “R” (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H).

For special multi-unit assemblies see Multi-Component Filter Brackets section.