3-169
HA-5222/883
Dual, Low Noise, Wideband,
Precision Operational Amplifier
Description
The HA-5222/883 is a dual, high performance, dielectrically
isolated, monolithic op amp, featuring precision DC charac-
teristics while providing excellent AC characteristics.
Designed for audio, video, and other demanding applica-
tions, noise (3.3nV/√Hz at 1kHz typ), total harmonic distor-
tion (<0.005% typ), and DC errors are kept to a minimum.
The precision performance is shown by low offset voltage
(0.3mV typ), low bias currents (40nA typ), low offset cur-
rents (15nA typ), and high open loop gain (128dB typ). The
combination of these excellent DC characteristics with fast
settling time (0.4µs typ) make the HA-5222/883 ideally
suited for precision signal conditioning.
The unique design of the HA-5222/883 gives this device out-
standing AC characteristics, including high unity gain band-
width (40MHz typ) and high slew rate (37V/µs typ), not
normally associated with precision op amps. Other key spec-
ifications include high CMRR (95dB typ) and high PSRR
(100dB typ). The combination of these specifications will
allow the HA-5222/883 to be used in RF signal conditioning
as well as video amplifiers.
Ordering Information
PART
NUMBER TEMPERATURE
RANGE PACKAGE
HA7-5222/883 -55oC to +125oC 8 Lead CerDIP
Features
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Gain Bandwidth Product. . . . . . . . . . . . . 100MHz (Min)
• Unity Gain Bandwidth . . . . . . . . . . . . . . . . 30MHz (Min)
40MHz (Typ)
• High Slew Rate. . . . . . . . . . . . . . . . . . . . . . 25V/µs (Min)
37V/µs (Typ)
• Low Offset Voltage. . . . . . . . . . . . . . . . . . 0.75mV (Max)
0.30mV (Typ)
• High Open Loop Gain . . . . . . . . . . . . . . . . .106dB (Min)
128dB (Typ)
• Channel Separation (at 10kHz). . . . . . . . . .110dB (Typ)
• Low Voltage Noise (at 1kHz) . . . . . . . . 5.9nV/√Hz (Max)
3.3nV/√Hz (Typ)
• Low Current Noise (at 1kHz). . . . . . . . 2.7pA/√Hz (Max)
1.3pA/√Hz (Typ)
• High Output Current . . . . . . . . . . . . . . . . . ±30mA (Min)
±56mA (Typ)
• Low Supply Current (per Op Amp.) . . . . . .10mA (Max)
8mA (Typ)
Applications
• Precision Test Systems
• Active Filtering
• Small Signal Video
• Accurate Signal Processing
• RF Signal Conditioning
January 1996
Spec Number 511062-883
File Number 3717.1
Pinout
HA-5222/883
(CERDIP)
TOP VIEW
2
3
4
1
7
6
5
8
+
+
OUT1
OUT2
1
2
+IN2
-IN2
V-
V+
+IN1
-IN1 -
-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 |Copyright © Intersil Corporation 1999
3-170
Specifications HA-5222/883
Absolute Maximum Ratings Thermal Information (Typical)
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 36V
Differential Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to V-
Peak Output Current (Pulsed at 1ms, 10% Duty Cycle). . . . .100mA
Continuous Output Current. . . . . . . . . . . . . . Short Circuit Protected
Junction Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300oC
Thermal Resistance θJA θJC
CerDIP Package . . . . . . . . . . . . . . . . . . . 96oC/W 16oC/W
Package Power Dissipation Limit at +75oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.04W
Package Power Dissipation Derating Factor Above +75oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.4mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range. . . . . . . . . . . . . . . . -55oC to +125oC
Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . ±5V to ±15V VINCM ≤ 1/2 (V+ - V-)
RL≥ 1kΩ
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY =±15V, RLOAD = 1kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS SYMBOL CONDITIONS GROUP A
SUBGROUPS TEMPERATURE
LIMITS
UNITSMIN MAX
Input Offset Voltage VIO VCM = 0V 1 +25oC -0.75 0.75 mV
2, 3 +125oC, -55oC -1.5 1.5 mV
Input Bias Current +IBVCM = 0V,
+RS = 100.1kΩ,
-RS = 100Ω
1 +25oC -80 80 nA
2, 3 +125oC, -55oC -200 200 nA
-IBVCM = 0V, +RS = 100Ω,
-RS = 100.1kΩ1 +25oC -80 80 nA
2, 3 +125oC, -55oC -200 200 nA
Input Offset Current IIO VCM = 0V,
+RS = 100.1kΩ,
-RS = 100.1kΩ
1 +25oC -50 50 nA
2, 3 +125oC, -55oC -150 150 nA
Common Mode Range +CMR V+ = +3V, V- = -27V 1 +25oC12-V
2, 3 +125oC, -55oC12 - V
-CMR V+ = +27V, V- = -3V 1 +25oC - -12 V
2, 3 +125oC, -55oC - -12 V
Large Signal Voltage
Gain +AVOL VOUT = 0V and +10V 4 +25oC 106 - dB
5, 6 +125oC, -55oC 100 - dB
-AVOL VOUT = 0V and -10V 4 +25oC 106 - dB
5, 6 +125oC, -55oC 100 - dB
Common Mode
Rejection Ratio +CMRR ∆VCM = +10V,
V+ = +5V, V- = -25V,
VOUT = -10V
1 +25oC88-dB
2, 3 +125oC, -55oC86 - dB
-CMRR ∆VCM = -10V,
V+ = +25V, V- = -5V,
VOUT = +10V
1 +25oC88-dB
2, 3 +125oC, -55oC86 - dB
Output Voltage Swing +VOUT RL = 1kΩ4 +25oC 12.0 - V
5, 6 +125oC, -55oC 11.5 - V
-VOUT RL = 1kΩ4 +25oC - -12.0 V
5, 6 +125oC, -55oC - -11.5 V
Spec Number 511062-883
3-171 Spec Number 511062-883
Specifications HA-5222/883
Output Current +IOUT VOUT = +10V, RL = 1kΩ4 +25oC30-mA
5, 6 +125oC, -55oC30 - mA
-IOUT VOUT = -10V, RL = 1kΩ4 +25oC - -30 mA
5, 6 +125oC, -55oC - -30 mA
Quiescent Power Supply
Current +ICC VOUT = 0V, IOUT = 0mA 1 +25oC - 20 mA
2, 3 +125oC, -55oC - 22 mA
-ICC VOUT = 0V, IOUT = 0mA 1 +25oC -20 - mA
2, 3 +125oC, -55oC -22 - mA
Power Supply
Rejection Ratio +PSRR ∆VSUP = 10V,
V+ = +20V, V- = -15V,
V+ = +10V, V- = -15V
1 +25oC90-dB
2, 3 +125oC, -55oC86 - dB
-PSRR ∆VSUP = 10V,
V+ = +15V, V- = -20V,
V+ = +15V, V- = -10V
1 +25oC90-dB
2, 3 +125oC, -55oC86 - dB
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Table 2 Intentionally Left Blank. See AC Specifications in Table 3.
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTIC
Device Characterized at: VSUPPLY =±15V, RLOAD = 1kΩ, Unless Otherwise Specified.
PARAMETERS SYMBOL CONDITIONS NOTES TEMPERATURE
LIMITS
UNITSMIN MAX
Input Noise Voltage
Density ENRS = 0Ω, fO = 10Hz 1, 5 +25oC - 16.0 nV/√Hz
RS = 0Ω, fO = 100Hz 1, 5 +25oC - 6.6 nV/√Hz
RS = 0Ω, fO = 1kHz 1, 5 +25oC - 5.9 nV/√Hz
Input Noise Current
Density INRS = 500kΩ, fO = 10Hz 1, 5 +25oC - 24.0 pA/√Hz
RS = 500kΩ, fO = 100Hz 1, 5 +25oC - 6.6 pA/√Hz
RS = 500kΩ, fO = 1kHz 1, 5 +25oC - 2.7 pA/√Hz
Gain Bandwidth Product GBWP VOUT = 200mVP-P,
fO = 100kHz 1 +25oC 100 - MHz
-55oC to +125oC 88 - MHz
Unity Gain Bandwidth UGBW VOUT = 200mV 1 +25oC 30 - MHz
-55oC to +125oC 25 - MHz
Slew Rate ±SR VOUT = ±2.5V,
CL = 50pF 1 -55oC to +125oC25 - V/µs
Full Power Bandwidth FPBW VPEAK = 10V 1, 2 -55oC to +125oC 398 - kHz
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: VSUPPLY =±15V, RLOAD = 1kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS SYMBOL CONDITIONS GROUP A
SUBGROUPS TEMPERATURE
LIMITS
UNITSMIN MAX
3-172 Spec Number 511062-883
Specifications HA-5222/883
Minimum Closed Loop
Stable Gain CLSG RL = 1kΩ, CL = 50pF 1 -55oC to +125oC 1 - V/V
Rise and Fall Time tR, tFVOUT = ±100mV 1, 4 +25oC - 20 ns
-55oC to +125oC - 35 ns
Overshoot ±OS VOUT = ±100mV 1 +25oC - 25 %
-55oC to +125oC - 30 %
Power Consumption PC VOUT = 0V, IOUT = 0mA 1, 3 -55oC to +125oC - 660 mW
NOTES:
1. P arameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These par am-
eters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization
based upon data from multiple production runs which reflect lot to lot and within lot variation.
2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2πVPEAK).
3. Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.).
4. Measured between 10% and 90% points.
5. Input Noise Voltage Density and Input Noise Current Density limits are based on characterization data.
TABLE 4. ELECTRICAL TEST REQUIREMENTS
MIL-STD-883 TEST REQUIREMENTS SUBGROUPS (SEE TABLE 1)
Interim Electrical Parameters (Pre Burn-In) 1
Final Electrical Test Parameters 1 (Note 1), 2, 3, 4, 5, 6
Group A Test Requirements 1, 2, 3, 4, 5, 6
Groups C and D Endpoints 1
NOTE:
1. PDA applies to Subgroup 1 only.
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTIC (Continued)
Device Characterized at: VSUPPLY =±15V, RLOAD = 1kΩ, Unless Otherwise Specified.
PARAMETERS SYMBOL CONDITIONS NOTES TEMPERATURE
LIMITS
UNITSMIN MAX
3-173
HA-5222/883
Die Characteristics
DIE DIMENSIONS:
78 x 185 x 19 mils ± 1 mils
1980 x 4690 x 483µm± 25.4µm
METALLIZATION:
Type: Al, 1% Cu
Thickness: 16kű2kÅ
GLASSIVATION:
Type: Nitride (Si3N4) over Silox (SIO2 5% Phos.)
Silox Thickness: 12kű2kÅ
Nitride Thickness: 3.5kű1.5kÅ
WORST CASE CURRENT DENSITY:
4.2 x 104A/cm2
SUBSTRATE POTENTIAL (Powered Up): V-
TRANSISTOR COUNT: 128
PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
HA-5222/883
OUT1
V+
OUT2
-IN2
+IN2
+IN1
-IN1
V-
Spec Number 511062-883
DESIGN INFORMATION (Continued)
The information contained in this section has been de v eloped through characterization by Harris Semiconductor and is f or use as application
and design information only. No guarantee is implied.
3-174
HA-5222
Typical Performance Curves Unless Otherwise Specified: TA = +25oC, VSUPPLY = ±15V
SUPPLY CURRENT/AMPLIFIER vs TEMPERATURE CHANNEL SEPARATION vs FREQUENCY
TYPICAL PERFORMANCE CHARACTERISTICS
Device Characterized at: Supply Voltage = ±15V, RL = 1kΩ, CL = 50pF, Unless Otherwise Specified
PARAMETERS CONDITIONS TEMPERATURE TYPICAL UNITS
Input Offset Voltage See Table 1 +25oC 0.30 mV
Full 0.35 mV
Average Offset Voltage Drift See Table 1 Full 0.50 µV/oC
Input Bias Current See Table 1 +25oC40nA
Full 70 nA
Input Offset Current See Table 1 +25oC15nA
Full 30 nA
Differential Input Resistance See Table 1 +25oC70kΩ
Input Noise Voltage fO = 0.1Hz to 10Hz +25oC 0.33 µVP-P
Input Noise Voltage Density fO = 10Hz +25oC 6.4 nV/√Hz
fO = 100Hz +25oC 3.7 nV/√Hz
fO = 1kHz +25oC 3.3 nV/√Hz
Input Noise Current Density fO = 10Hz +25oC 8 pA/√Hz
fO = 100Hz +25oC 2.7 pA/√Hz
fO = 1kHz +25oC 1.3 pA/√Hz
THD & N See Note 1 +25oC 0.005 %
Large Signal Voltage Gain VOUT = 0V to ±10V +25oC 128 dB
Full 120 dB
Spec Number 511062-883
DESIGN INFORMATION (Continued)
The information contained in this section has been de v eloped through characterization by Harris Semiconductor and is f or use as application
and design information only. No guarantee is implied.
3-175
HA-5222
Common Mode Rejection Ratio ∆VCM = ±10V Full 95 dB
Unity Gain Bandwidth -3dB +25oC 40 MHz
+125oC 33 MHz
-55oC 50 MHz
Gain Bandwidth Product 1kHz to 400kHz +25oC 140 MHz
+125oC 115 MHz
-55oC 160 MHz
Minimum Gain Stability Full 1 V/V
Output Voltage Swing RL = 333ΩFull 110 V
RL = 1K +25oC 112.5 V
Full 112.1 V
Output Current VOUT = ±10V Full 156 mA
Output Resistance +25oC10V
Full Power Bandwidth FPBW = SR/2πVPEAK,
VPEAK = 10V +25oC 398 kHz
Channel Separation fO = 10kHz +25oC 110 dB
Slew Rate VOUT = ±2.5V +25oC37V/µs
+125oC39V/µs
-55oC36V/µs
Rise Time VOUT = ±100mV +25oC16ns
+125oC17ns
-55oC17ns
Overshoot VOUT = ±100mV +25oC12%
+125oC11%
-55oC12%
Settling Time 10VSTEP
, AV = -1 0.1% +25oC 0.4 µs
0.01% +25oC 1.5 µs
Power Supply Rejection Ratio ∆VS = ±10V to ±20V Full 100 dB
Supply Current Quiescent, VOUT = 0V,
IOUT = 0mA Full 8 mA/Op Amp
Minimum Supply Voltage Functional Operation Only.
Other Parameters May Vary. +25oC15V
NOTE:
1. AVCL = 10, fO = 1kHz, VOUT = 5Vrms, RL = 600Ω, 10Hz to 100kHz, Minimum resolution of test equipment is 0.005%.
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Characterized at: Supply Voltage = ±15V, RL = 1kΩ, CL = 50pF, Unless Otherwise Specified
PARAMETERS CONDITIONS TEMPERATURE TYPICAL UNITS
Spec Number 511062-883
3-176
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable . Howe ver, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use . No license is g r anted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: (321) 724-7000
FAX: (321) 724-7240
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: (32) 2.724.2111
FAX: (32) 2.724.22.05
ASIA
Intersil (Taiwan) Ltd.
Taiwan Limited
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029
HA-5222
Spec Number 511062-883
