FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1, 2 POLES--5, 10, 16 A FBR610, 620 SERIES FEATURES Maximum switching capacity of 30 VDC,16 A and 240 VAC, 16 A (single pole, K type) 5 kV AC minimum dielectric strength (between coil and contacts) 10 kV minimum surge strength (between coil and con tacts) Coil terminal separated from output terminals to allow easy PC board design High reliability design conforming to safety standards Japan Electrical Appliance Control Law (150-300 V) UL 508 NO TF ORDERING INFORMATION [Example] DE FBR6 1 (a) (b) 3 (c) N (d) D012 (e) -K (f ) SI OR -CSA (g) FBR6: FBR600 Series NE (a) Series Name (b) Number of Contacts (c) Contact Arrangement (d) Enclosure Nil N (e) Nominal Voltage (Example) 012: 12 VDC 024: 24 VDC (refer to the COIL DATA CHART) (f) Contact Rating Nil -K (g) Safety Standards Nil : UL 508 recognized -CSA: UL 508 + CSA recognized -T : VDE + UL 508 + CSA recognized Only for 1 form C and 1 form A standard types, without -K or does not apply to -K type (refer to the SAFETY AND FILE NUMBERS) 1 2 1 3 5 : 1 pole : 2 poles GN : Form C : Form A : Form B : Flux free type : Plastic sealed type S : Standard : K type (1 pole ONLY) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR611ND024 Stamp: 611ND024 232 W FBR610, 620 SERIES SAFETY STANDARD AND FILE NUMBERS UL508, (File No. E63614) C 22.2 No. 0, No. 14 (File No. LR40304 or LR64026) VDE 0435, 0860 (File No. 5304UG) Safety Standard K type Standard 1 Pole Type 1 form C, 1 form A UL CSA recognized recognized Nominal voltage recognized 1 form B NO 1 form C recognized -- 5 to 60 VDC 1 form A, 1 form B 2 Poles UL 10 A 240 VAC resistive CSA 10 A 30 VDC resistive 1/2 HP 240 VAC, 1/3 HP 120 VAC UL 10 A 240 VAC resistive CSA 10 A 30 VDC resistive -- recognized standard TF recognized recognized DE Contact ratings VDE SI UL 16 A 240 VAC resistive CSA 10 A 30 VDC resistive 1/2 HP 240 VAC, 1/3 HP 120 VAC UL OR -- GN CSA 10 A 240 VAC resistive 10 A 30 VDC resistive 1/2 HP 240 VAC, 1/3 HP 120 VAC 6 A 240 VAC resistive 6 A 30 VDC resistive NE S W 2 FBR610, 620 SERIES SPECIFICATIONS 1 Pole type Item K type Standard 1 form A, B Contact Arrangement 1 form C, A, B Material Silver-cadmium oxide Resistance (initial) Maximum 100 m (at 1 A 6 VDC) Ratings (resistive load) 10 A 240 VAC 10 A 30 VDC 16 A 240 VAC 16 A 30 VDC 14 A 16 A NO Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 Minimum Switching Coil Insulation Power Consumption Rated 1 form C 2 form C, A, B 10 A 240 VAC 10 A 30 VDC 5 A 240 VAC 5 A 30 VDC 7A 3,840VA or 480W 2,400 VA or 300W 1,200 VA or 150 W 250 VAC or 125 VDC 0.5 W (5 V, 100 mA) Approximately 0.5 W (at 20C) Approximately 0.35 W (at 20C) OR -40C to +70C (no frost) (refer to the CHARACTERISTIC DATA) *3 Operating Humidity 45 to 85%RH DE Operate (at nominal voltage) Maximum 15 ms Release (at nominal voltage) Maximum 5 ms Resistance (initial) Minimum 100 M (at 500 VDC) SI Between open contacts 1,000 VAC 1 minute Between coil and contacts 5,000 VAC 1 minute Between adjacent contacts -- Surge Strength Other 1 form A, B Operating Temperature Dielectric Strength Life 1 form C TF Load*2 Operate Time Value 2,400VA or 300W 2 Poles type GN NE 10,000 V (at 1.2 x 50 s) S Mechanical 20 x Electical (refer to DC the REFERENCE DATA) AC 1x Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) Endurance 10 to 55 Hz (double amplitude of 1.5 mm) Misoperation 100 m/s2 (11 1 ms) Endurance 500 m/s 2 (11 1 ms) Shock Resistance Weight 106 105 operations minimum operations minimum (at contact rating) 2 x 10 ops. min. 5 W 3,000 VAC 1 minute 1 x 105 operations minimum (at contact rating) Approximately 16 g *1 If the switching voltage exceeds the rated contact voltage. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. *3 Based on UL Class A coil insulation system. 3 FBR610, 620 SERIES COIL DATA CHART MODEL 1 Pole type Standard 2 Poles type K type FBR611, 611N FBR613, 613N FBR615, 615N Standard FBR621, 621N FBR623, 623N FBR625, 625N Nominal Coil current Must Nominal resistance (at nominal operate voltage voltage) voltage (10%) approx. FBR61 D005 FBR61 D005-K FBR62 D005 5 VDC 50 100 mA FBR61 D006 FBR61 D006-K FBR62 D006 6 VDC 72 83 mA FBR61 D009 FBR61 D009-K FBR62 D009 9 VDC 160 FBR61 D012-K FBR62 D012 12 VDC 285 FBR61 D018-K FBR62 D018 18 VDC 640 FBR61 D024-K FBR62 D024 24 VDC 1,150 21 mA FBR61 D048-K FBR62 D048 48 VDC 4,600 10 mA FBR61 D060-K FBR62 D060 60 VDC 7,200 8 mA FBR61 D012 FBR61 D018 FBR61 D024 FBR61 D048 FBR61 D060 NO TF Note: All values in the table are measured at 20C. DE Maximum allowable voltage Nominal power Coil temperature rise Approx. Approx. 56 mA 70% max. 10% min. Refer to the 500 mW 35 deg of of 42 mA nominal nominal REFERENCE (at nominal (at nominal DATA voltage) voltage) 28 mA voltage voltage OR SI Must release voltage GN NE S W 4 FBR610, 620 SERIES Coil temperature rise data Range of operation temperature and voltage 180 140 130 120 Rated contact carrying current 110 100 Operating voltage range 90 age 80 olt te v era t op NO 70 Mus 60 Rated contact carrying current 50 (at 20C) 40 30 No contact carrying current 20 0.2 -10 0 10 20 30 40 50 60 70 80 0.4 0.6 2 1 0.5 0.3 TF DE AC resistive load ( AC contact rating) DC resistive load) ( AC contact rating) 0.1 AC inductive load Cos o = 0.4 DC inductive load L/R = 7 ms 10 20 30 50 120 240 Contact load voltage (V) REFERENCE DATA 1.0 1.2 3 2 AC resistive load (K type) 1 100 50 10 SI ( AC contact rating) DC resistive load 0.3 ( DC contact rating) AC inductive load Coso=0.4 (K type) AC inductive load Coso=0.4 (standard) DC inductive load L/R = 7ms 2 1 pole standard and K type OR 6 8 10 240 VAC resistive load 100 1 pole standard and K type (1 form C) 50 1 pole K type (1 form A, 1 form B) 10 2 poles type 2 0 Contact load current (A) 80 Distribution (%) 60 4 6 8 10 12 14 16 18 Contact load current (A) S Release 40 500 NE 12 GN 100 120 240 Life curves (AC load) 30 VDC resistive load 4 20 30 50 Contact load voltage (V) W Distribution of contact resistance Distribution of operate and release time Operation AC resistive load (standard) 0.5 10 2 poles type 0 80 ( AC contact rating) 1.4 500 Distribution of operate and release voltage Distribution (%) 0.8 5 Life curves (DC load) Service life (x104 operations) Contact load current (A) Maximum switching capacity (2 poles type) 3 Coil power (W) Operating temperature (C) 5 20 16 10 0.1 Service life (x104 operations) 150 70 80 Operation Release 60 40 20 60 Distribution (%) 160 Contact load current (A) No contact carrying current Data assumes that the maximum Ma xim allowable temperaum ture of E type all ow insulation coil is ab le 115C co il v olt ag e 170 Maximum switching capacity (1 pole type) 80 Coil temperature rise (C) Rated of operating voltage to rated coil voltage (V) CHARACTERISTIC DATA 40 20 20 0 0 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) 0 1 2 3 4 5 6 Time (ms) 7 8 9 10 0 10 20 30 40 50 60 70 80 Contact resistance (m) 5 FBR610, 620 SERIES DIMENSIONS 1. 1 Pole type 1 form A K type Standard 1 form B K type Standard DE +0.1 3.50.1 3.50.1 5-o 1.3 -0 +0.1 5.00.1 5.00.1 8-o 1.3 -0 24.7+0.3 2 form C SI 3.50.5 4 5 8 7 5 OR 200.1 +0.1 5.00.1 Schematics (BOTTOM VIEW) Note: The terminal number is not shown on the relay. 5.0 5.0 +0.1 7.5 3 4 5 7 6 5 200.1 3.50.1 +0.1 W 28.7+0.3 20 5.0 (6.0) 5.0 (6.0) 5.0 1 2 4 2 3 4 8 7 6 5 8 7 5 7 6 5 200.1 200.1 7.50.1 +0.1 7.50.1 200.1 8-o 1.3 -0 6-o 1.3 -0 NE 4 5.00.1 5.00.1 +0.1 5.00.1 4-o 1.3 -0 1 2 3 PC board mounting hole layout (BOTTOM VIEW) (2.55) 7.5 2 2 form B (2.55) 7.5 20 4 200.1 S 28.7+0.3 (2.55) (6.0) 6 6-o 1.3 -0 2 form A 20 (All types are in common) 2 200.1 4-o 1.3 -0 (2.55) (2.55) 1 2 GN 28.7+0.3 12.6+0.4 3.50.1 4 5.0 (6.0) 5.00.1 +0.1 6-o 1.3 -0 7.50.1 2. 2 Poles type 5 200.1 7.50.1 200.1 PC board mounting hole layout (BOTTOM VIEW) 8 7 6 8 3.5 7.50.1 5 Note: The terminal number is not shown on the relay. 2 4 1 2 3 (6.0) 7.5 6 7.5 TF 4 5.0 (6.0) (2.55) 2 8 3.5 (6.0) 20 7.5 Schematics (BOTTOM VIEW) (6.0) 5.0 5.0 28.7+0.3 20 7.50.1 (6.0) 3.5 3.5 (2.55) 7.5 (2.55) (All types are in common) 20 7.5 NO 20 28.7+0.3 7.5 20 28.7+0.3 (2.55) 20 28.7+0.3 7.50.1 28.7+0.3 7.50.1 28.7+0.3 7.50.1 12.6+0.4 3.50.5 24.7+0.3 1 form C K type Standard 5.00.1 +0.1 6-o 1.3 -0 Unit: mm 6 FBR610, 620 SERIES Fujitsu Takamisawa International Headquarter Offices www.fujitsu.takamisawa.com NO Europe Fujitsu Takamisawa Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Japan Fujitsu Takamisawa Component Limited Global Marketing and Sales Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Asia Pacific Fujitsu Takamisawa Asia Pacific Pte. Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 North and South America Fujitsu Takamisawa America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 TF DE SI OR GN NE S W 7