MEDIUM INTENSITY - TINTED ENCAPSULATION
LED
-BCR
-BCA
-BCG
Color
RED
AMB
GRN
Viewing
Angle
35
35
24
V/C
Table[3]
I
I
I
Iv[2]
(mcd)
120
100
80
λpk
(nm)
635
583
565
HIGH INTENSITY - WATERCLEAR ENCAPSULATION
LED
-NWR
-NWO
-NWA
-NWG
-NWB
-NWW[7]
-NKR
-NKO
-NKA
-NKG
-NKB
-NKW[7]
Color
RED
ORG
AMB
GRN
BLU
WHT
RED
ORG
AMB
GRN
BLU
WHT
Viewing
Angle
30
30
30
45
45
50
15
15
15
15
15
20
V/C
Table[3]
I
I
I
II
II
II
I
I
I
II
II
II
Iv[2]
(mcd)
5300
2000
5300
2400
700
1560
6900
8000
6900
10000
3000
5600
λpk
(nm)
634
605
592
520
465
[9]
634
605
592
520
465
[9]
.312" MOUNT PANEL LIGHTS
50 Series
445 S. Douglas Street, El Segundo, CA 90245-4630 • (800) 421-6815 • (310) 640-0442 • FAX (310) 640-7639
www.datadisplay.com
© 2003 Data Display Products
58
- Mounting Hardware Provided - For Detailed LED Data, See Discrete Section, MODEL 200
Data Display Products®
Model Wires
51 W
53[1] (optional)
54
56
561
564
TO ORDER, FOLLOW THE EXAMPLE:
Voltage[4]
2
5H
12H
15H
24H
28H
48H
60H
120[5]
Lens
Diffusion
-C
Clear
-N
Diffused
Bezel
Color
0
Black
9
White
Lens Lens Bezel
Model LED Voltage Diffusion Color Color
54 -ALP 2 -C A 9
1
3
4
Lens Color
RRed
AAmber
YYellow
GGreen
5
6
BBlue
WWater
Clear
-S Smoke[8]
1234 5 6
Select one BOLD component from each numbered category in the tables below.
Part Number 54-ALP2-CA9
➜
[1] Model 53 is available with Clear (-C) Lens only.
[2] Iv = typical luminous intensity @ If = 20mA (Ta =25°C). Iv is measured without lenses. For Low
Power LEDs, If = 2mA.
[3] See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA.
[4] Ta = 25°C. Voltage 2 indicates external resistor required. Voltages 5H through 60H are VDC.
For AC operation, insert D after Voltage (e.g. 24HD), D indicates built-in rectifier; not required for
15H or less, or 120VAC. DC operation not available for 120V. Bi-Color and Tri-Color not available in
AC voltages.
[5] Select high intensity LEDs only.
[6] Omit H when selecting a voltage (e.g. 51-RLP12-CWO).
[7] Select -CW or -NW lens only. -RAG wire leads: green anode/black cathode/red anode. -GAR wire
leads: green cathode/black anode/red cathode. Common lead is the first lead clockwise from
reference mark on header. Tri-Color 5 or 12 volt, omit H in part number.
[8] Omit Lens Diffusion when selecting smoked lens (e.g. 51-NWA12H-SO).
[9] White is identified by one of four CIE coordinates x:0.290/y:0.260, x:0.290/y:0.305,
x:0.330/y:0:365,x:0.330/y:0.320
Voltage/Current
Design Max
Vf/If Vf/If
V/C Table II
5V/15mA 6V/26mA
12V/15mA 14V/20mA
15V/15mA 16.5V/18mA
24V/15mA 26V/18mA
28V/15mA 30V/17mA
48V/9.5mA 50V/10mA
60V/7mA 65V/8mA
120VAC/3.5mA 130VAC/4mA
Voltage/Current
Design Max
Vf/If Vf/If
V/C Table I
5V/27mA 5.5V/40mA
12V/27mA 14V/35mA
15V/24mA 16.5V/28mA
24V/17mA 26V/20mA
28V/16.5mA 30V/18mA
48V/15mA 50V/16mA
60V/9mA 65V/10mA
120VAC/3.5mA 130VAC/4mA
SPECIALTY LEDs
LED
-RLP[6]
-ALP[6]
-GLP[6]
-LRG[7]
-RAG[7]
-GAR[7]
Color
RED
AMB
GRN
RED/GRN
RED/AMB/GRN
GRN/AMB/RED
Viewing
Angle
50
50
50
60
60
50
V/C
Table[3]
[3]
[3]
[3]
I
I
I
Description
Low Power
Low Power
Low Power
Bi-Color. Red Cathode
Tri-Color, Common Cathode
Tri-Color, Common Anode
2
Iv[2]
(mcd)
2.3
2.1
2.3
90/40
6/6/6
5/5/5
λpk
(nm)
635
583
565
660/565
630/565
635/565
445 S. Douglas Street, El Segundo, CA 90245-4630 • (800) 421-6815 • (310) 640-0442 • FAX (310) 640-7639
www.datadisplay.com
© 2003 Data Display Products
59
.312" MOUNT PANEL LIGHTS
50 Series
Data Display Products®
51
53 54 (flush lens)
56 561
564 TC5 & NW5 Mounting Hardware
Standard Wire Leads:
6.0" total length(nominal)/.50" stripped (nominal), red
anode/black cathode, 24 AWG TPB UL1061 insulation.
Contact factory for other lengths, gauges and colors.
All dimensions are in inches (mm)
Tolerances: .xx"(.x) ±.025"(.63) / .xxx"(.xx)±.010"(.25)
Specifications are subject to change without notice.
