Resistors Model 628 OBSOLETE Model 628 Series * * * * * * .220" Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25C Operating Temperature Range Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance 10 to 1Meg (Plus "0" Ohm Jumper) 2%(<33 = 1 Ohm) (Optional: F Tol. = 1%) -55C to +125C 100ppm/C (<100 = 250ppm/C) 50ppm/C 50Vdc or PR 10,000 Megohms Environmental Thermal Shock plus Power Conditioning R 0.70% Short Time Overload R 0.25% Moisture Resistance R 0.50% Mechanical Shock R 0.25% Vibration R 0.25% Low Temperature Operation R 0.25% High Temperature Exposure R 0.50% Load Life, 2000 Hours (330 = 0.5 Ohm) R 0.50% Resistance to Solder Heat (Total Immersion in solder at 280C for 10 sec.) R 0.25% Dielectric Withstanding Voltage Temperature Exposure, Maximum 200V for 1 minute 215C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-0 Rated Storage Temperature Range -55C to +150C General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronicsresistors.com (c) TT Electronics plc 05.16 Model 628 OBSOLETE Model 628 Series Mechanical Lead Material 96-96.5%Sn, 3.5-4%Ag Lead Configuration Gull Wing Lead Coplanarity 0.002 in. (0.051mm) Substrate Material Alumina Resistor Material Cermet Body Material Epoxy Standard Resistance Values, Ohms A Circuit (Isolated Resistors) Bold type represents stock standard values for `A' Circuit B Circuit (Bussed Resistors) Bold type represents stock standard values for `B' Circuit Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code Ohms Code 22 220 1.2K 122 39K 393 22 220 1.2K 122 39K 393 33 330 1.5K 152 47K 473 33 330 1.5K 152 47K 473 39 390 1.8K 182 56K 563 39 390 1.8K 182 56K 563 47 470 2K 202 68K 683 47 470 2K 202 68K 683 56 560 2.2K 222 82K 823 56 560 2.2K 222 82K 823 68 680 2.7K 272 100K 104 68 680 2.7K 272 100K 104 82 820 3.3K 332 120K 124 82 820 3.3K 332 120K 124 100 101 3.9K 392 150K 154 100 101 3.9K 392 150K 154 120 121 4.7K 472 180K 184 120 121 4.7K 472 180K 184 150 151 5.6K 562 220K 224 150 151 5.6K 562 220K 224 180 181 6.8K 682 270K 274 180 181 6.8K 682 270K 274 220 221 8.2K 822 330K 334 220 221 8.2K 822 330K 334 270 271 10K 103 390K 394 270 271 10K 103 390K 394 330 331 12K 123 470K 474 330 331 12K 123 470K 474 390 391 15K 153 560K 564 390 391 15K 153 560K 564 470 471 18K 183 680K 684 470 471 18K 183 680K 684 560 561 20K 203 820K 824 560 561 20K 203 820K 824 680 681 22K 223 1 Meg 105 680 681 22K 223 1 Meg 105 820 821 27K 273 820 821 27K 273 1K 102 33K 333 1K 102 33K 333 J Circuit (Dual Terminators) Ohms (R1/R2) Code (R1/R2) Marking Ohms (R1/R2) Code (R1/R2) Marking 120/120 121/121 45 330/470 331/471 10 150/150 151/151 40 390/390 391/391 42 180/300 181/301 31 470/470 471/471 43 220/220 221/221 39 1K/3.3K 102/332 35 220/330 221/331 08 3K/6.2K 302/662 13 270/270 221/331 41 6.8K/22K 682/223 29 330/390 331/391 09 - - - General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronicsresistors.com (c) TT Electronics plc 05.16 Model 628 OBSOLETE MODELS627,628 MODELS627,628 MODELS627,628 Model 628 Series Outline Dimensions (Inch/mm) .445 11.30 .445 11.30 .445 .395 10.03 11.30 .395 10.03 .395 10.03 .090 2.29 Max. .090 Max. 2.29 .090 2.29 Max. .028 Typ. 0.71 .028 .028 Typ. 0.71 Typ. 0.71 .310 Max. 7.87 .310 .310 Max. 7.87 Max. 7.87 .220.005 5.590.13 .220.005 .220.005 5.590.13 5.590.13 .008.005 0.200.13 .008.005 .008.005 0.200.13 0.200.13 .050 .050 Typ. 1.27 1.27 Typ. .050 Typ. 1.27 .016 Typ..016 Typ. 0.41 0.41 .016 Typ. 0.41 .008 .008 Typ. Typ. 0.20 0.20 .008 Typ. 0.20 Note: Maximum allowable mold excursion = 0.006" Schematics N N N N N N N N N R1 R1 R2 R1 R2 R2 1 Note: 1 1 Model 628: N = 16 Leads N/2 1 N/2 N/2 N/2 1 1 1 N/2 N/2 1 1 N/2 N/2 N/2 Solder Pad Layout (Inch/mm) .050 Typ. 1.27 .050 Typ. 1.27 .050 Typ. 1.27 .030.005 0.760.13 .030.005 0.760.13 .030.005 0.760.13 .220.010 5.590.25 .315 Min. 8.00 .220.010 5.590.25 .220.010 5.590.25 .315 Min. 8.00 .315 Min. 8.00 .045.005 1.140.13 .045.005 Glenrothes,FifeKY74NX,UK 1.140.13 .045.005 Telephone:+44(0)1592662200*Facsimile:+44(0)1592662299*Website:www.bitechnologies.com*Email:sales@bitechnologies.co.uk General Note 1.140.13 TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. Glenrothes,FifeKY74NX,UK 627,628SeriesIssueNov2008 BI Technologies IRC Welwyn Telephone:+44(0)1592662200*Facsimile:+44(0)1592662299*Website:www.bitechnologies.com*Email:sales@bitechnologies.co.uk Glenrothes,FifeKY74NX,UK Telephone:+44(0)1592662200*Facsimile:+44(0)1592662299*Website:www.bitechnologies.com*Email:sales@bitechnologies.co.uk (c) TT Electronics plc www.ttelectronicsresistors.com 627,628SeriesIssueNov2008 627,628SeriesIssueNov2008 05.16 Model 628 OBSOLETE Model 628 Series MODELS627,628 Typical Part Marking 628A330 8A330 628A331 8A331 628J221/331 8J08 Manufacturer'sTrademark 627 1.28 0.32 0.16 0.16 628 1.28 0.32 0.16 0.16 DateCode PartMarking --Resistor(PerCircuit)-- Lead#1Indicator Power Dissipation, Watts At 70C Tape&Reel -- Resistor (Per Circuit) -- ConformstorequirementsofEIA481. Model Allunitsorientatedwithlead#1totheleftofdirectionoffeed. Package A 628 Tape: 1.28 0.32 Width=24mm B J 0.16 0.16 Pocket=EmbossedPlastic,Antistatic Pitch=12mm Diameter=13"(300mm)Maximum Capacity=2,000Units Packaging Standard: Tape Reel: Option: Magazine: Reel: Tape & Reel Conforms to requirements of EIA-481. All units orientated with lead #1 to the left of direction of feed. Magazines Width = 24mm ConformstoEIAandJEDECstandards. Pocket = Embossed Plastic, Antistatic Pitch = 12mm Allunitsorientatedwithlead#1tothesameside. Diameter = Capacity = 13" (300mm) Maximum 2,000 Units Magazines Magazine:Capacity=50Units Conforms to EIA and JEDEC standards. All units orientated with lead #1 to the same side. Magazine: Capacity = 50 Units General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. Glenrothes,FifeKY74NX,UK BI Technologies IRC Welwyn (c) Telephone:+44(0)1592662200*Facsimile:+44(0)1592662299*Website:www.bitechnologies.com*Email:sales@bitechnologies.co.uk TT Electronics plc www.ttelectronicsresistors.com 627,628SeriesIssueNov2008 05.16 Model 628 OBSOLETE Model 628 Series Applicable Documents MIL-R-914 - Resistor Networks, Fixed, Film, Surface Mount Established Reliability General Specifications MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 - Test Methods for Electronics and Electrical Component Parts EIA-481 - Carrier Taping of Surface Mount Components for Automatic Handling EIA-PDP-100 - SOGN-0002 Outline Dimensions Ordering Information 62 8 J 331 / 471 F TR4 Model Number of Leads: 7 = 14 Leads 8 = 16 Leads Circuit Type: A = Isolated B = Bussed J = Dual Terminator Standard Tape & Reel Packaging: (No code used for magazines.) Tolerance Code: F = 1% (No code used for 2% Std.) R2 Resistance Code: (Add for J Circuit only.) Resistance Code: E12 & E24 Series: First two digits are significant. Last digit denotes number of trailing zeros. E96 Series: First three digits are significant. Last digit denotes number of trailing zeros. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. BI Technologies IRC Welwyn www.ttelectronicsresistors.com (c) TT Electronics plc 05.16