HES150ZG-AN-I - Power-One - Datasheet.Directory

(888) IPD-CONVerters

●

(888) 473-2668

●

www.ipdconverters.com

C-44

12345678910

X10 = LOAD %

EFFICIENCY

HES033ZE

HES075ZG

HES100ZE

TECHNICAL SPECIFICATIONS

HES single output DC/DC converters provide up to

150 Watts of output power in an industry standard,

half-brick package and footprint. These units feature

ultra-high efficiency, Class A conducted noise specs, and

fixed switching frequency. The HES is designed with

open-frame packaging, along with planar magnetics to

provide maximum useable power with minimal thermal

constraints. The HES is especially suited to harsh

telecom, networking, and industrial applications, and is

fully compatible with production board washing

processes.

• High Efficiency

• Industry Standard Half-

Brick

• Open-Frame Packaging

• 100°C Baseplate Operation

• Water Washable

• “True-Trim” Option

• 1500V Isolation

• Positive or Negative

Logic

DESCRIPTION FEATURES

HES SERIES - 150 WATT

General

Turn-On Time 10 ms

Remote Shutdown Positive Or Negative Logic

Remote Shutdown Reference Vin Negative

Switching Frequency 2.5 & 3.3, 5V Model 200 kHz, 300 kHz (Respectively)

Isolation

Input - Output 1500 VDC

Input - Case 1050 VDC

Output - Case 500 VDC

Temperature Coefficient 0.2%/°C

Case Temperature

Operating Range -40 To +100°C

Storage Range -40 To +125°C

Thermal Shutdown Range 105 To 115°C

Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz

MTBF† (Bellcore Tr-nwt-000332) 1.8 X 106 hrs

Safety UL 1950, Csa 22.2-950, En60950

Weight (Approx.) 1.4 oz

Notes

1 Industrial temp range of -40 to +85C available, add suffix -I to P/N

† MTBF predictions may vary slightly from model to model.

Specifications typically at 25°C, normal line, and full load, unless otherwise

stated.

Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with

commercial wave-soldering equipment.

Safety: Agency approvals may vary from model to model. Please consult factory

for specific model information.

Units are water-washable and fully compatible with commercial spray or

immersion post wave-solder washing equipment.

Efficiency vs. Load (48V Input)

Output

Setpoint Accuracy ±1%

Line Regulation Vin Min. - Vin Max., I out Rated 0.2% Vout

Load Regulation Iout Min. - Iout Max., Vin Nom. 0.2% Vout

Remote Sense Headroom 0.5 VDC

Minimum Output Current 10 %

Dynamic Regulation, Loadstep 25% Iout

Pk Deviation 4% Vout

Settling Time 500

Voltage Trim Range ±10%

Short Circuit / Overcurrent Protection Shutdown / Hiccup

Current Limit Threshold Range, % of Iout Rated 110 - 130%

OVP Trip Range 120 - 140% Vout Nom.

OVP Type Self Recovering

Voltage Range

24 VDC Nominal 18 - 36 VDC

48 VDC Nominal 36 - 72 VDC

Reflected Ripple 50 mA

Input Reverse Voltage Protection Shunt Diode

Input Undervoltage Lockout / Hysteresis <34 V/1V Nom.

Input

C-45

Vin

(Volts)

Vin Range

(Volts)

Iin Max.*

(Amps)

Vout

(Volts)

Iout Rated

(Amps)

Ripple & Noise

Pk-Pk (mV)

Efficiency

Typ. ** Model

36 - 72

0.89

1.13

1.62

1.33

1.69

2.42

1.77

2.26

3.23

2.60

3.33

4.72

2.20

2.5

3.3

2.5

3.3

2.5

3.3

2.5

3.3

2.1

100

89%

87%

88%

86%

88%

89%

86%

85%

88%

82%

83%

86%

80%

HES025ZD-A

HES033ZE-A

HES050ZG-A

HES037ZD-A

HES050ZE-A

HES075ZG-A

HES050ZD-A

HES066ZE-A

HES100ZG-A

HES075ZD-A

HES100ZE-A

HES150ZG-A

HES063ZC-A

* Maximum input current at minimum input voltage, maximum rated output power.

** At nominal Vin, rated output.

MECHANICAL DRAWING

Thermal Impedance

Natural Convection 15.4 °C/W

100 LFM 12.2 °C /W

200 LFM 9.3 °C /W

300 LFM 7.4 °C /W

400 LFM 6.4 °C /W

Tolerances

Note:

Thermal impedance data is dependent on

many environmental factors. The exact

thermal performance should be validated for

specific application.

HES SERIES - 150 WATT

1 +V

2 -V

3 No Pin

(Shutdown)

4 +V

out

5 No Pin

(Trim)

6 -V

out

Inches: (Millimeters)

.XX ± 0.020 .X ± 0.5

.XXX ± 0.010 .XX ± 0.25

Pin:

± 0.002 ±

0.05

( Dimensions as listed unless otherwise specified.)

Pin Function

MODELS - (See the last page of this file for options.)

MOUNTING INSERTS

M3X.5 THROUGH 4PL

1.400"(35.6mm)

1.000"(25.4mm)

0.700"(17.8mm)

0.400"(10.2mm)

-0.50"(-12.7mm)

2.40"

(61.0mm)

2.28"

(57.9mm)

BOTTOM VIEW

0.18"

DIA 0.080"

DIA 0.040"

0.025" REF.

0.50"

(12.7mm)

(4.6mm)

(1.0mm)

(2.0mm)

(0.6mm)

1.900"

(48.3mm) -0.19"

(-4.8mm)

2PL

7PL

C105

OPTIONS

When ordering equipment options, use the following suffix information. Select the option(s) that

you prefer and add them to the model number. Example ordering options are located below the

options table.

OPTION SUFFIX APPLICABLE SERIES REMARKS

Negative Logic N HAS, HBD, HBS, HES, LES, QBS,

QES, TES, TQD TTL “Low” Turns Module ON

TTL “High” Turns Module OFF

Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES

Terminal Strip TS XWS, XWD, XWT

Trim 1 IAS, LES

Enable 2 IA D, IAS, LES, SMS

Trim and Enable 3 IAS, LES

Current Share 4 SMS

Headerless Y E ncapsulated EWS, IWS, OWS

PIN LENGTH AND HEAT SINK

OPTIONS Standard Pin Length is 0.180”

(4.6mm)

0.110” (2.8mm) Pin Length 8 All Units (Except SMS)

0.150” (3.8mm) Pin Length 9 All Units (Except SMS)

0.24” (6.1mm) Horizontal Heatsi nk 1H All Units (Except DIP, SIP, and SM