PATENT NUMBERS
5713755 / 5961339
2
MAX SWAY
(EITHER DIRECTION)
DO NOT
SCALE FROM
THIS PRINT
FTR-1XX-XX-XX-D-X-XX
No OF POSITIONS
-02 THRU -50
(PER ROW)
BODY SPECIFICATION
-D: DOUBLE (USE HTMS-50-D)
LEAD STYLE
SEE TABLE 1
PLATING SPECIFICATION
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-T: MATTE TIN CONTACT AND TAIL
(LEAD STYLES -01, -02, -03, -51, -52 ONLY)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL (LEAD STYLE -01 ONLY)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-TM: MATTE TIN CONTACT AND TAIL
(LEAD STYLES -01, -02, -03, -51, -52 ONLY)
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
OPTION
-P: PICK & PLACE PAD
(USE PPP-22)
(SEE FIG 3, SHT 2)
[5 POS MIN]
OPTION
-XX: POLARIZING SPECIFICATION
XX INDICATES POS TO BE OMMITED
-A: ALIGNMENT PIN (5 POS MIN)
( SEE FIG 2, SHT 2)
SAMTEC DISCRETION ON WHICH
-A PIN USED.
-LC: STAKED LOCKING CLIP (USE LC-05-TM)
(SEE FIG 4, SHT 2 & NOTE 10)
-TR: TAPE AND REEL PACKAGING
[+.05/-.25]
(No OF POS x .050 [1.27]) +.002/-.010
.196 4.98
REF
.050
REF
1.27
.100 2.54
REF
3
MAX SWAY
(EITHER DIRECTION)
02 100
01 99
HTMS-50-D
SEE NOTE 4
.100 2.54
REF
.018
SQ
0.46
REF
AREA
CONTACT
T-1M6-XX-XX-2
FIG 1
FTR-1XX-XX-D SHOWN
"B"
.050
(TYP)
1.27
(SEE NOTE 5)
90°
-
2°
+
4°
(TYP)
.05 1.3
(SEE NOTE 7)
.2960
REF
7.518
2
MAX SWAY
(EITHER DIRECTION)
C1
C3
C2
.004 [.10]
C
AR
AR
AR
AR
AR
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.1 [2.5]
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
HI-TEMP TERMINAL MICRO-STRIP (DOUBLE ROW)
BY:
FTR-1XX-XX-XX-D-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
02/09/1995
2
1
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
TERMINAL: PHOS BRONZE
C:\EnterpriseVault\DWG\MISC\MKTG\FTR-1XX-XX-XX-D-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .010[.25].
3. MINIMUM PUSHOUT FORCE: 2 LB.
4. MAXIMUM PIN ROTATION IN BODY: 2°.
5. SHEAR TAILS TO DIMENSION SHOWN.
6. MAXIMUM BURR ALLOWANCE: .003[.08]
7. MEASURED AT BEND RADIUS.
8. TUBE POSITIONS -05 AND GREATER; LAYER PACKAGE
POSITIONS -02 THRU -04.
9. -P OPTION: TUBE POSITIONS -07 THRU -50;
ALL OTHERS, TAPE & REEL ONLY.
10. DUE TO HIGH AMOUNT OF INSERTION FORCE NEEDED,
THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT.
SAMTEC RECOMENDS MANUAL PLACEMENT FOR ALL
ASSEMBLIES WITH THE -LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
BRATCHER
REVISION AR
.0430
REF
1.092
.090 2.29
.040 1.02
REF
SMA-8H
.105 2.67
.056
REF
1.42
LC-05-TM
FIG 4
-LC OPTION: STAKED LOCKING CLIP
(6 POSITIONS MINIMUM)
(DIFFERENT AS SHOWN, OTHERWISE SEE FIG 1)
.090 2.29
REF
.0430 1.092
REF
.040 1.02
REF
HTMS-50-D-XX
.375
REF
9.53
"Q"
"N"
.230 5.84
REF
C
L
.390
REF
9.91
PPP-22
(No OF POS -2) x .0500[1.270] REF
(No OF POS - 2) x .0500[1.270]
(No. OF POS - 2) x .0500[1.270]
FIG 2
-A OPTION: ALIGNMENT PIN
(DIFFERENT AS SHOWN, OTHERWISE SEE FIG 1)
FIG 3
-P PICK & PLACE
(5 POSITIONS MINIMUM, SEE NOTE 9)
"N" = USE MEASURED DIM
"Q" = {("N" - .375) / 2}
.020
AR
AR
STAKED
(5 POSITIONS MINIMUM)
MOLDED
(5 POSITIONS MINIMUM)
AR
SHEET OF
HI-TEMP TERMINAL MICRO-STRIP (DOUBLE ROW)
BY:
FTR-1XX-XX-XX-D-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
02/09/1995
2
2
SHEET SCALE: 2:1
REVISION AR
C:\EnterpriseVault\DWG\MISC\MKTG\FTR-1XX-XX-XX-D-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
